We report the design and in-orbit demonstration of a compact optical system for a 87Sr optical lattice clock aboard the Chinese Space Station. This system adopts a compact and robust vertically stacked architecture with a total volume of 0.11 m3 and a mass of 53.6 kg. It passed thermal and vibration qualification tests and remained fully operational after launch. In orbit, it achieved automated multi-stage laser stabilization and a blue magneto-optical trap for 87Sr atoms. This marks a significant step toward operational optical clocks in space.
Compact and robust optical clocks are significant in scientific research and engineering. Here, we present a physical system for a strontium atomic optical clock with dimensions of 465 mm × 588 mm × 415 mm and a weight of 66.6 kg. To date, this is one of the most compact physical systems ever reported. The application of the magnetic shielding box in this physical system allowed the effect of external magnetic field fluctuation on cold atoms to be negligible. The physical system passed rigorous environmental tests and remained operational. A wavelength meter integrated in this physical system could monitor the wavelengths of the incident laser, and it could automatically calibrate the wavelengths of all lasers using a microcomputer. This compact and robust physical system could be a hardware basis for demonstrating a portable optical clock or even a space optical clock.
The microgravity environment modifies the resonance condition that is formed with the participation of gravity in the 689 nm narrow-line magneto-optical trap (red MOT) of a ground-based strontium optical clock. Consequently, a cooling scheme optimized under standard 1g ground-commissioning conditions cannot be directly transferred to an in-orbit space optical clock. In this work, we establish a one-dimensional semiclassical Monte Carlo stochastic dynamics model along the ground-gravity direction to study the cooling dynamics, spatial distribution, and position compensation of a 88Sr narrow-line MOT under microgravity. The simulations show that directly applying ground-optimized parameters in microgravity leads to heating, cloud broadening, and displacement from the lattice position calibrated on the ground. Reducing the detuning can produce a smaller spatial distribution, but this behavior is mainly phase-space truncation and cannot maintain a sufficient effective atom number. We propose a dynamic-control scheme in which the laser detuning and intensity are continuously ramped, achieving an atomic temperature below 3 μK under microgravity while retaining more than 98% of the atoms in the MOT, outperforming the 1g ground-gravity reference case. On this basis, magnetic-gradient screening is used to obtain a cloud size matched to the optical-lattice mode. After an additional compensation magnetic field is introduced, the deviation between the narrow-line MOT center and the lattice position is ∼2.4 μm, far smaller than the transverse scale of the lattice beam. These results provide a physical picture and theoretical guidance for in-orbit commissioning of the narrow-line MOT in a strontium optical clock on the Chinese Space Station.
The 1626 nm laser is an essential component for conducting superlattice research on the strontium atomic clock platform. The superlattice constructed with the 1626 nm and 813 nm lasers will facilitate cutting-edge quantum information research focused on topological quantum states transport. We demonstrate an idler-resonant optical parametric oscillator that achieves 1626 nm laser output based on pump enhancement technology. Through a well-designed external cavity, a laser output of 127 mW at 1626 nm has been achieved, with a corresponding pump quantum conversion efficiency of 50% and a pump threshold of 110 mW. The long-term power stability of the output laser is ±1.5% per hour. Variations in the pump cavity modes under different experimental conditions have been measured, and the impedance matching process of the pump light within the cavity has been discussed. The 1626 nm laser and the associated technologies reported in this manuscript will provide optical support for the investigation of superlattice physics on the strontium optical lattice clock platform.