The paper analyzed the content of pollutants and harmful elements in the soil in Bor during the year 2022. The concentrations of Cu, Ni, Cr, Pb and As in the soil were determined at 15 locations near the Bor Mining and Smelting Complex. Soil pollution at individual locations was assessed based on the measured concentration of elements and certain factors and pollution indices (contamination factor (Cf), degree of contamination (Cd), modified degree of contamination (mCd), geo-accumulation index (Igeo), pollution load index (PLI), Nemerow Pollution Index (PIN), individual and total index of potential risk of environmental pollution). Pearson's correlation coefficients indicated a strong correlation between Cu and Pb (0.887), Cu and As (0.953), Pb and As (0.960) and Cr and Ni (0.889). The results showed that there is an uneven distribution of pollutants and harmful elements in the investigated area. Elevated content of the mentioned elements was determined mostly for Cu, which is expected, and only at one location for Pb and As. Based on the obtained indices and factors, the overall quality of the soil in the selected locations is variable. It was found that the sites varied from uncontaminated to heavily polluted at the Park location - the old center of Bor, which had the highest risk of pollution.
1 January 2025 in Mining and Metallurgy Engineering Bor
Renewable energy sources have a significant potential for improving the development of mankind. Energy obtained from the renewable sources, such as water, wind, solar and biomass, among others, can facilitate access to clean and safe energy for millions of people. It can provide an incentive for the social and economic development, contributing to the society tackling the environmental challenges. The clean energy technologies, impact of renewable sources on the environment and energy security should enable the general access to the modern energy services, increase the global rate of energy efficiency improvement, and increase the share of energy from the renewable sources within the global energy system. This achieves an integrated approach to the sustainable energy services, ensures the use of renewable energy sources and thus achieves more energy efficient solutions. The renewable energy technologies provide a unique opportunity to limit the carbon emissions into the atmosphere without compromising access to the energy, which has the significant implications for slowing down the climate changes. Also, development the renewable energy sources creates access to energy that is inexhaustible, thereby reducing a country's reliance on foreign resources and increasing its energy security. In addition, the renewable energy sources bring the great health benefits, providing the clean, safe energy, without the negative effects of using the fossil fuels.
1 January 2023 in Journal of Mining and Metallurgy A: Mining
Three-dimensional (3D) surface imaging systems have gained popularity in monitoring the status and condition of separation processes by characterizing the internal and external structures of particles such as size, shape, density and composition. This review article mainly focuses on demonstrating the state of the art of 3D imaging systems in mineral processing based of the recent growth in 3D sensors. The structure of this manuscript comprises an overview of the two 3D imaging systems, including RhoVol and X-ray computed tomography, based on the basic principles. Their applications in mineral processing are then explained. By integrating with other imaging tools and the 3D printing technology, 3D surface imaging systems will play an important role in the automation and control of mineral processing in the future.
Geotechnical and hydrogeological investigations were carried out at the location on the sector 6 of the "Valja Fundata" flotation tailing dump in Majdanpek. The goal of investigations was to define the geotechnical and hydrogeological structure of this part of the tailings dump, as a basis for determining the optimal conditions for overhanging and rehabilitation of the terrain, planned for the landfill expansion. The appropriate geotechnical and hydrogeological terrain models, which will be used as a starting point for further construction and mining design, were developed applying the multidisciplinary geological investigation models.
Finding new types of materials, usually by modernizing classic materials by introducing and combining some of the new components within the already existing standard ones, based on improved and innovated classical materials, leads to the production of materials that are characterized by a complex of new features that enable a wide range of their practical applications. It is widely known that rare metals such as gallium and germanium possess special features that are necessary for further progress in electronics. These materials are used in electrical engineering, radio engineering and electronics, in optical and electronic devices and instruments as functional materials for transistors, diodes, integral circuits, optical cables, conductors, rectifiers, etc. in atomic and astrophysical testing, aerospace industry, laser technology, sensors of neural networks, atomic reactors and the semiconductor industry. Given the wide range of applications and use of these materials in almost all-important areas and techniques, there is a need for a more complete knowledge of the properties of not only these elements, but also the systems of which they are integral parts, from the aspect of their fuller description and thermodynamic determination. Therefore, in this paper, research in the ternary system Ga-Ge-Sb will be presented in order to complete the thermodynamic description of the system. Its practical significance and application are mostly in the semiconductor industry, from the point of view of defining the thermodynamic quantities of the components constituting this system, as well as the results characterization of the thermodynamic behavior of the investigated alloys by DTA analysis of this system.
1 January 2024 in Mining and Metallurgy Engineering Bor
Atmospheric pollution at the open pits depends on the annual production and intensity of emissions the harmful gases and dust, that is, development the individual phases in overburdening and obtaining the useful mineral resources. The gas and dust emissions at the open pits occurs as a consequence of technological processes aimed at obtaining the mineral resources, most often during loading and transport operations. In addition, the pollution also depends on the terrain configuration around the open pit and climatic parameters. Therefore, it can be considered that the entire area of the open pit is a source of environmental pollution. This paper will present the results of pollution level by gaseous pollutants at the open pit, caused by the operation of mining machines.