Coal flow in belt conveyors is often mixed with foreign objects, such as anchor rods, angle irons, wooden bars, gangue, and large coal chunks, leading to belt tearing, blockages at transfer points, or even belt breakage. Fast and effective detection of these foreign objects is vital to ensure belt conveyors’ safe and smooth operation. This paper proposes an improved YOLOv5-based method for rapid and low-parameter detection and recognition of non-coal foreign objects. Firstly, a new dataset containing foreign objects on conveyor belts is established for training and testing. Considering the high-speed operation of belt conveyors and the increased demands for inspection robot data collection frequency and real-time algorithm processing, this study employs a dark channel dehazing method to preprocess the raw data collected by the inspection robot in harsh mining environments, thus enhancing image clarity. Subsequently, improvements are made to the backbone and neck of YOLOv5 to achieve a deep lightweight object detection network that ensures detection speed and accuracy. The experimental results demonstrate that the improved model achieves a detection accuracy of 94.9% on the proposed foreign object dataset. Compared to YOLOv5s, the model parameters, inference time, and computational load are reduced by 43.1%, 54.1%, and 43.6%, respectively, while the detection accuracy is improved by 2.5%. These findings are significant for enhancing the detection speed of foreign object recognition and facilitating its application in edge computing devices, thus ensuring belt conveyors’ safe and efficient operation.

As a crucial element in coal transportation, conveyor belts play a vital role, and monitoring their health is essential for the coal mine transportation system’s safe and efficient operation. This paper introduces a new ‘hardware-friendly’ method for monitoring belt conveyor damage, aiming to address the issue of large parameters and computational requirements in existing deep learning-based foreign object detection methods and their challenges in deploying on edge devices with limited computing power. This method is tailored towards edge computing and aims to reduce the parameters and computational load of foreign object recognition networks deployed on edge computing devices. This method improves the YOLOv8 object detection network and redesigns a novel lightweight ShuffleNetV2 network as the backbone network, making the network more delicate in recognizing foreign object features while reducing redundant parameters. Additionally, a simple parameter-free attention mechanism called SimAM is introduced to further enhance recognition efficiency without imposing additional computational burden. Experimental results demonstrate that the improved foreign object recognition method achieves a detection accuracy of 95.6% with only 1.6 M parameters and 4.7 G model computational load (FLOPs). Compared to the baseline YOLOv8n, the detection accuracy has improved by 3.3 percentage points, while the number of parameters and model computational load have been reduced by 48.4% and 42.0%, respectively. These works are more friendly to edge computing devices that tend to “hardware friendly” algorithms. The improved algorithm can reduce latency in the data transmission process, enabling the accurate and timely detection of non-coal foreign objects on the conveyor belt. This provides assurance for the subsequent host computer system to promptly identify and address foreign objects, thereby ensuring the safety and efficiency of the belt conveyor.

In this paper, a novel weak fault features extraction scheme is proposed to extract weak fault features in head sheave bearings of floor-type multi-rope friction mine hoists in strong noise environments. A mutual information-based sample entropy (MI-SE) is proposed to select the effective intrinsic mode function (IMF). The numerical simulation presented in this paper has demonstrated that the improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) has a poor performance on weak signals processing under a strong noise background, and fault features cannot be identified clearly. The de-noised signal is decomposed into several IMFs by the ICEEMDAN method, with the help of the minimum entropy deconvolution (MED), which works as a pre-filter to increase the kurtosis value by about 3.2 times. The envelope spectrum of the effective IMF selected by the MI-SE method shows almost all fault features clearly. An analogous experiment system was built to verify the feasibility of the proposed scheme, whose results have also shown that the proposed hybrid scheme has better performance compared with ICEEMDAN or MED on the weak fault features extraction under a strong noise background. This paper provides a novel method to diagnose the weak faults of the slow speed and heavy load rolling bearings in a strong noise environment.

This article introduces a tracked-leg transformable robot, TALBOT. The mechanical and electrical design, control method, and environment perception based on LiDAR are discussed. The original tracked-leg transformable structure allows the robot to switch between the tracked and legged mode to achieve all-terrain adaptation. In the tracked mode, TALBOT is controlled by the method of differential speed between the two tracked feet. In the legged mode, TALBOT is controlled based on a bionic control strategy of the central pattern generator to realize the generation and conversion of gait. In addition, the robot is equipped with a LiDAR, through sensor preprocessing and optimization of the slam mapping algorithm, so that the robot achieves a better mapping effect. We tested the robot’s motion performance and the slam mapping effect, including going straight and turning in tracked and legged modes and building a map in an indoor environment.

In this paper, the influence mechanism of tempering temperature on the microstructure and mechanical properties of 35CrMo steel used in the hammerhead of piston-type impact pile hammer is systematically analyzed. The microstructure was characterized by scanning and transmission electron microscope, X-ray diffraction, and electron backscattering diffraction, and the mechanical properties were tested by the uniaxial tensile test and Charpy V-notch impact test. The results show that after tempering at 580–680 °C, the microstructure of 35CrMo is tempered sorbite. With the increase in tempering temperature, the α phase in the matrix gradually recovers, the dislocation density decreases, the low-angle grain boundaries gradually change to the high-angle grain boundaries, and the carbides gradually change from long rod-shaped network continuous distribution to spherical uniform dispersion distribution, but all of them are M₃C. Meanwhile, with the increase in tempering temperature, the strength decreases and the toughness increases, which is mainly affected by dislocation density and matrix supersaturation. Furthermore, 35CrMo enters the two-phase zone after tempering at 710–740 °C, and its microstructure is lamellar martensite, with carbide dissolved. At this point, its mechanical properties mainly depend on grain size.

At present, the hydraulic support pushing system in coal mines usually uses an electrohydraulic directional valve as the control component. However, the existing control methods based on high-speed on–off valve, servo, and proportional control methods are not suitable for solving such problems because of the nonideal characteristics of the electrohydraulic directional valve, such as discrete input values, low switching frequency, and time delay. This paper proposes a positioning control scheme based on online predictive feedback for the control of hydraulic cylinders by electrohydraulic directional valves. In this scheme, the recursive least-squares estimation algorithm with genetic factors is used to identify the required prediction model in real time, and an improved radial basis function network based on generalized growth and shear is used to realize the online fitting of the target trajectory function. The online learning algorithm provides accurate prediction information for the switching control method, and finally, the hydraulic cylinder can be positioned near the target position using the optimal control method. By using the above methods, a well-designed model can be accurately identified, fundamentally solving the problem of control difficulties caused by the nonideal characteristics of the electrohydraulic directional valve. Finally, the effectiveness of the control scheme is verified through simulation analysis and physical experiment research, which proves that the control strategy can realize accurate and fast positioning control for the hydraulic support pushing system of a fully mechanized mining face.