Post-blast operations in tunnel construction represent a critical bottleneck due to mandatory downtime and hazardous environmental conditions. This study addresses these challenges by developing and validating an integrated cyber–physical architecture that coordinates an autonomous Unmanned Aerial Vehicle (UAV) and an Autonomous Wheel Loader (AWL) under the supervision of a Digital Twin acting as central operational digital interface. Specifically, this technology was designed to access the tunnel, evaluate post-blasting conditions, and initiate operations during mandatory exclusion periods for personnel. The system was validated in a realistic, Global Navigation Satellite System (GNSS)-denied tunnel environment emulating post-detonation visibility constraints. The results demonstrate that the aerial agent successfully navigated and mapped the excavation front in less than 8 min, establishing a shared coordinate system for the ground machinery. Through this collaborative workflow, the autonomous deployment enabled operations to commence 50% to 80% earlier than conventional manual procedures. Furthermore, the system reduced daily operational time by approximately 8%, with an estimated return on financial investment between one and seven months. Overall, the proposed framework eliminates human exposure during high-risk inspections and transforms the fragmented excavation cycle into a continuous, data-driven process.
Road maintenance remains one of the most resource-intensive and hazardous operations in infrastructure management. Traditional inspection practices rely heavily on manual labour and discrete procedures, often resulting in limited scalability, operator exposure to traffic hazards, and inefficiencies in data collection. This paper presents a novel automated methodology that integrates Unmanned Aerial Vehicles (UAVs) and autonomous mobile robots (AMRs) to enable automated inspection and measurement of road assets through a digital twin (DT) system. The system leverages data fusion and real-time synchronisation between field agents and a centralised digital twin to monitor the retro-reflectivity of vertical and horizontal signage, detect obstacles and vegetation, and support data-driven maintenance planning. A case study conducted on the Italian highway network demonstrated improvements in operational safety, inspection efficiency, and measurement consistency. The results confirm that the integration of UAVs and AMRs within a digital twin framework can significantly improve sustainability, productivity, and workers’ safety in road maintenance operations.