Ni (hydr)oxide is a promising and inexpensive material for oxygen evolution reaction (OER) catalysts and is known to dramatically increase the activity when used with Fe. Herein, we basified a Ni(II) solution and coated layered Ni(OH)2 on Ni coins to prepare a template with high stability and activity. To evaluate the stability and catalytic activity during high-current-density operation, we analyzed the electrochemical and physicochemical properties before and after constant current (CC) operation. The electrode with a Ni(OH)2 surface exhibited higher initial activity than that with a NiO surface; however, after the OER operation at a high-current density, degradation occurred owing to structural destruction. The activity of the electrodes with a NiO surface improved after the CC operation because of the changes on the electrode-surface caused by the CC operation and the subsequent Fe incorporation from the Fe impurity in the electrolyte. After confirming the improvement in activity due to Fe, we prepared NiFe-oxide electrodes with improved catalytic activity and optimized the Ni precursor and Fe loading solution concentrations. The Ni-Fe oxide electrode prepared under the optimal concentrations exhibited an overpotential of 287 mV at a current density of 10 mA/cm2, and a tafel slope of 37 mV dec−1, indicating an improvement in the OER activity.
In this study, we investigated the oxygen evolution reaction (OER) characteristics of Ni–Zn–Fe electrodes by varying plating current density and Ni:Fe ratio in a plating bath. The activity of the OER increased up to the plating current density of 160 mA/cm2, as the Fe content of the deposited electrode increased and electrochemical surface area (ECSA) increased after Zn dealloying. However, for the plated electrode with higher than 160 mA/cm2 of current density, the change in composition caused by underpotential deposition led to decreased activity due to decreasing Fe content and diminishing Zn dealloying. Moreover, when the Ni:Fe ratio in the plating bath was varied, outstanding OER activity was observed at Ni:Fe = 2:1. When the Fe content of the bath increased beyond this ratio, Fe could not restrain Ni oxidation and formed Fe oxides in OER reaction, and oxygen vacancy decreased. These caused a degradation of the OER activity.
Iron cation impurities reportedly enhance the oxygen evolution reaction (OER) activity of Ni-based catalysts, and the enhancement of OER activity by Fe cations has been extensively studied. Meanwhile, Fe salts, such as iron hydroxide and iron oxyhydroxide, in the electrolyte improve the OER performance, but the distinct roles of Fe cations and Fe salts have not been fully clarified or differentiated. In this study, NiO electrodes were synthesized, and their OER performance was evaluated in KOH electrolytes containing goethite (α-FeOOH). Unlike Fe cations, which enhance the performance via incorporation into the NiO structure, α-FeOOH boosts OER activity by adsorbing onto the electrode surface. Surface analysis revealed trace amounts of α-FeOOH on the NiO surface, indicating that physical contact alone enables α-FeOOH to adsorb onto NiO. Moreover, interactions between α-FeOOH and NiO were observed, suggesting their potential role in OER activity enhancement. These findings suggest that Fe salts in the electrolyte influence OER performance and should be considered in the development of OER electrodes.
30 December 2020 in Transactions of the Korean hydrogen and new energy society