Jianjun Yuan

Dr. Jianjun Yuan


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 December 2014 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KNKazuhisa Nakajima
Kazuhisa Nakajima
JYJianjun Yuan
Jianjun Yuan
LCLiming Chen
Liming Chen
ZSZhengming Sheng
Zhengming Sheng
We present a new external-beam radiation therapy system using very-high-energy (VHE) electron/photon beams generated by a centimeter-scale laser plasma accelerator built in a robotic system. Most types of external-beam radiation therapy are delivered using a machine called a medical linear accelerator driven by radio frequency (RF) power amplifiers, producing electron beams with an energy range of 6–20 MeV, in conjunction with modern radiation therapy technologies for effective shaping of three-dimensional dose distributions and spatially accurate dose delivery with imaging verification. However, the limited penetration depth and low quality of the transverse penumbra at such electron beams delivered from the present RF linear accelerators prevent the implementation of advanced modalities in current cancer treatments. These drawbacks can be overcome if the electron energy is increased to above 50 MeV. To overcome the disadvantages of the present RF-based medical accelerators, harnessing recent advancement of laser-driven plasma accelerators capable of producing 1-GeV electron beams in a 1-cm gas cell, we propose a new embodiment of the external-beam radiation therapy robotic system delivering very high-energy electron/photon beams with an energy of 50–250 MeV; it is more compact, less expensive, and has a simpler operation and higher performance in comparison with the current radiation therapy system.

24 March 2020 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
PCPengzi Chu
Pengzi Chu
YYYi Yu
Yi Yu
DDDanyang Dong
Danyang Dong
HLHui Lin
Hui Lin
JYJianjun Yuan
Jianjun Yuan
Automatic train operation (ATO) system is one of the important components in advanced train operation control systems. Ideal controllers are expected for the automatic driving function of ATO systems. Aiming at the intelligence requirements of the systems, an NSGA-II-based parameter tuning method for the fuzzy immune PID (FI-PID) controller and a grey model GM(1,1)-based fuzzy grey immune PID (FGI-PID) controller were proposed. Taking a maglev train’s model as the control object and a velocity-time curve as the input, the feasibility of the parameter tuning method for the FI-PID controller and the applicability of the FI-PID controller and the FGI-PID controller for the ATO system were tested. The results showed that the optimized parameters were ideal, the two controllers all showed good performance on the indicators of traceability and comfort level, and the FGI-PID controller performed better than the FI-PID controller. The results exhibited the effectiveness of the proposed methods.

4 September 2017 in Assembly Automation
Verified
Journal Article
Closed access
JYJianjun Yuan
Jianjun Yuan
Weiwei WanWeiwei Wan
Weiwei Wan
XFXiajun Fu
Xiajun Fu
SWShuai Wang
Shuai Wang
NWNing Wang
Ning Wang
Purpose: This paper aims to propose a novel method to identify the parameters of robotic manipulators using the torque exerted by the robot joint motors (measured by current sensors). Design/methodology/approach: Previous studies used additional sensors like force sensor and inertia measurement unit, or additional payload mounted on the end-effector to perform parameter identification. The settings of these previous works were complicated. They could only identify part of the parameters. This paper uses the torque exerted by each joint while performing Fourier periodic excited trajectories. It divides the parameters into a linear part and a non-linear part, and uses linear least square (LLS) parameter estimation and dual-swarm-based particle swarm optimization (DPso) to compute the linear and non-linear parts, respectively. Findings: The settings are simpler and can identify the dynamic parameters, the viscous friction coefficients and the Coulomb friction coefficients of two joints at the same time. A SIASUN 7-Axis Flexible Robot is used to experimentally validate the proposal. Comparison between the predicted torque values and ground-truth values of the joints confirms the effectiveness of the method. Originality/value: The proposed method identifies two joints at the same time with satisfying precision and high efficiency. The identification errors of joints do not accumulate.

1 December 2019
Verified
Conference Paper
Closed access
JDJiaolong Du
Jiaolong Du
JYJianjun Yuan
Jianjun Yuan
ZHZhedong Han
Zhedong Han
YQYingjie Qian
Yingjie Qian
In this paper, a novel human direct teaching method of industrial manipulator with large mass and friction based on internal current sensors installed in joints is proposed. Dynamic model for an industrial robot is analyzed in detail, where the gravity torque and friction torque are the main items that need to be considered. Friction torque is influenced by joint speed and temperature. A method to identify joint friction parameters rapidly is proposed, and experiments are carried out to acquire friction characteristics under different temperatures. Then, the implementation method and improvement measures of direct human teaching are introduced in consideration of robot gravity torque and friction torque of joints. Finally, validation tests are conducted to verify the feasibility of the direct teaching method. Experiment result shows that the method based on internal current sensors is capable of realizing direct teaching flexibly and easily.

12 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JYJianjun Yuan
Jianjun Yuan
XZXiaoqun Zhao
Xiaoqun Zhao
PCPengzi Chu
Pengzi Chu
The cross-line operation mode, based on interoperability technology, is becoming increasingly common in urban rail transits (URTs). Compared to trains running on a single line, cross-line trains can greatly facilitate transfer passengers. Taking the scenario of emergent large transfer passenger flow as an example, this paper explores the train rescheduling problem for serving transfer passengers by adding a cross-line backup train. To maximize the number of transfer passengers served by the cross-line backup train, a nonlinear optimization model is constructed by taking into account the operation parameters of planned trains on relevant lines, the deviation degree of the planned timetable, the utilization of the cross-line backup train, and the passenger flow calculation as constraints, and some linearization lemmas are proposed to transform it into a mixed integer programming (MIP) model with quadratic terms. A case study is conducted to discuss the impact of parameter changes on the objective function value and the applicability of different solution approaches. The results suggest that the operation trajectory of the cross-line backup train has an effect on the objective function value, which is related to the demand, the deviation tolerance of the planned timetable, and the running efficiency tolerance of the cross-line backup train. The corresponding methods help guide the organization of the cross-line backup train for large transfer passenger flow scenarios.

1 January 2006
Verified
Conference Paper
Closed access
DXDun Xiangming
Dun Xiangming
JYJianjun Yuan
Jianjun Yuan
LCLiang Chen
Liang Chen
The auto-docking system design for the fuel loading robot used in hazardous environment is presented. The mechanical structure and the sensing algorithm of this system are introduced in details. The sensor system adopts two accurate CCDs as the automatic visual positioning device to measure the position and the posture between the manipulator of the robot and the objective in case of the good visual condition, besides, as a compensation for the shortage of the vision system, the tactile sensor system which likes the probe of an insect is also employed. The precision of proposed vision and tactile sensory system is analyzed. The result of experiment and the simulation indicate that this auto-docking system features rapid reaction speed and high measurement precision, which can be used to implement the auto-docking task for the fuel loading robot in hazard environment.