Current intracortical probe technology is limited in clinical implementation due to the short functional lifetime of implanted devices. Devices often fail several months to years post-implantation, likely due to the chronic immune response characterized by glial scarring and neuronal dieback. It has been demonstrated that this neuroinflammatory response is influenced by the mechanical mismatch between stiff devices and the soft brain tissue, spurring interest in the use of softer polymer materials for probe encapsulation. Here, we demonstrate stable recordings and electrochemical properties obtained from fully encapsulated shape memory polymer (SMP) intracortical electrodes implanted in the rat motor cortex for 13 weeks. SMPs are a class of material that exhibit modulus changes when exposed to specific conditions. The formulation used in these devices softens by an order of magnitude after implantation compared to its dry, room-temperature modulus of ~2 GPa.
A recent development in bioelectronic devices involves the utilization of multifunctional polymers as substrate material. Dynamically softening, thin-film polymers reduce the mechanical mismatch between device and tissue after implantation and therefore improves the device–tissue interaction. However, when implementing a new material into the fabrication of fully functional and chronically viable devices, there are specific challenges that need to be addressed. The key for all multimaterial devices is to ensure a good adhesion and connectivity between the different layers. That is especially true if one of the materials is sensitive to stimuli such as temperature and moisture. This review will give an overview on the development of a variety of neural interfaces for recording and stimulation with softening shape memory polymers (SMPs) as substrate material. This review discusses specific requirements for device fabrication, testing, and durability.