A novel transparent 4.76 at.% Tm:(Lu2/3Sc1/3)2O3 “mixed” sequioxide ceramic is synthesized by hot isostatic pressing (HIP) at 1800 °C / 195 MPa in an Ar atmosphere. Its structure is studied by scanning electron microscopy, X-ray diffraction, and Raman spectroscopy. The spectroscopic properties of the Tm3+ ion are described within the Judd-Ofelt theory, which resulted in intensity parameters of Ω2 = 2.429, Ω4 = 1.078 and Ω6 = 0.653 [10−20 cm2]. For the 3F4 → 3H6 transition, the maximum stimulated-emission cross-section σSE is 7.15 × 10−21 cm2 at 1951 nm. The radiative lifetime of the 3F4 state is 4.01 ms. Under diode-pumping at 802 nm, a microchip Tm:(Lu,Sc)2O3 ceramic laser generated ~1 W at 2100 nm with a slope efficiency of 24%. The spectroscopic and laser properties of the Tm:(Lu,Sc)2O3 ceramic are compared with those of a Tm:LuScO3 single crystal. The ceramic exhibits very broad and flat gain cross sections, which is promising for ultrashort pulse generation.
The microstructure and performance of HMX were adjusted by a solvation-desolvation process. HMX solvates were prepared by recrystallization in N,N-dimethylformamide (DMF) and N-methylpyrrolidone (NMP), respectively. Specific microstructures of HMX with microcrystal clusters were obtained by the desolvation of HMX solvates through anti-solvent extraction and vacuum pyrolysis. With different solvents and desolvation methods, the HMX crystals show a variety of morphologies, particle size, and polymorphic stability. The microcrystalline HMX clusters can be easily broken into superfine crystals by ultrasonic dispersion system and have higher β→δ polymorphic transformation temperature than the raw β-HMX. Moreover, microcrystalline HMX clusters have reduced impact and friction sensitivity and are expected to enhance the reliability of small booster charges and improve the overall performance of the HMX-based booster.
Energetic complexes represent a crucial research direction for the design and synthesis of novel energetic materials. In this work, 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105), a significant explosive compound with exceptional comprehensive properties, was selected as the ligand for coordinating with various metal ions. Four novel energetic complexes, Ni(C4H3N6O5)2·DMF (1), Co(C4H3N6O5)2·2DMF (2), Mn(C4H3N6O5)3·3/2DMF (3), and Cu3(C4H2N6O5)3·3DMF (4) were successfully synthesized, and their crystal structures were identified by a single-crystal X-ray diffraction technique. The structural analyses illustrated that LLM-105 can form either a mononuclear metal complex after the deprotonation of one amino group or a trinuclear metal complex after the deprotonation of two amino groups. Compound 1 exhibits a planar quadrilateral geometry, while both compounds 2 and 3 display distorted octahedral configurations. Compound 4 has three metal centers and exhibits two coordination configurations of distorted tetragonal pyramid geometry and planar quadrilateral geometry. The detonation performances of compounds 1–4 were also theoretically calculated, revealing their favorable explosive properties. These findings emphasize the diverse coordination modes of LLM-105 and the structural variability and adjustability of its complexes, offering valuable insights for regulating both the structure and performance of the LLM-105 complex as well as researching its deprotonation.
The formation of stable amorphous phases in rigid organic small molecules is fundamentally hindered by their pronounced crystallization tendency. This challenge is particularly acute in energetic materials, in which the amorphous phase must be stabilized without inert additives to preserve high energy density. Here, we overcome this longstanding obstacle by realising a stable amorphous energetic material based on the small molecule explosive (4,4′,5,5′-tetranitro-1H,1′H-2,2′-biimidazole-1,1′-diamine, DATNBI). The amorphous DATNBI (AEM-DATNBI) prepared via a melt quenching process, exhibits a glass transition temperature of 59.67 °C and demonstrates remarkable structural stability below this threshold, maintaining its integrity for over 24 hours at 60 °C. This stability originates from a synergistic interaction between the non-planar molecular framework and a three-dimensional hydrogen-bond network formed by -NH₂/-NO₂ groups. This unique amorphous structure not only enhances safety by suppressing hotspot formation but also accelerates energy release, leading to faster combustion and more complete decomposition. This study demonstrates a general strategy leveraging steric hindrance and intermolecular interactions, thereby extending the realm of amorphous materials to energetic compounds and other functional rigid organic small molecules.
Polype ntafluoropropane glycidyl ether (PPFEE), a new random block hydroxyl-terminated polyfluoroether, was synthesized successfully by cationic ring-opening polymerization of 2-(2,2,3,3,3-pentafluoropropoxymethyl) oxirane, and its molecular structure was confirmed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectrometry, and gel permeation chromatography. The PPFEE-based polyurethane elastomers featuring fluorine in their side chains were prepared using PPFEE as soft segments, polyisocyanate polyaryl polymethylene isocyanate as hard segments, and dibutyltin dilaurate as catalysts under different curing conditions. The microphase separation, mechanical performance, and thermal behavior of the elastomers were investigated by differential scanning calorimetry, uniaxial tensile test, and thermal gravimetric analysis, respectively. Based on the results, the percentage of hard segments dissolved into the soft segments of elastomers was opposite to the change in breaking strength. The PPFEE-based polyurethane elastomer cured with 20 wt% PAPI at the curing temperature of 50 °C displayed the maximum tensile elongation of 2.26 MPa with an elongation at break of nearly 150%. The increased contents of PAPI can effectively strengthen the tensile strength, and the maximum tensile elongation was 3.04 MPa with an elongation at break of nearly 90% when the content of PAPI was 26 wt%. In addition, the PPFEE-based polyurethane elastomers exhibited excellent resistance to thermal decomposition and a sharp weight loss temperature at around 371 °C. All the results demonstrated that the PPFEE may be a potential polymeric binder as one of the ingredients applied to future propellant formulations.
30 June 2022 in Central European Journal of Energetic Materials