In this article, lead-free piezoelectric ceramics are investigated for active vibration control of piezolaminated composite shell structure. The shell structure is in the form of layered composite shell. Finite element modeling is performed to obtain vibratory response of the piezolaminated shell structure. Modeling is based on first-order shear deformation theory and linear piezoelectric theory. Fuzzy logic controller is used as controlling technique to reduce the vibration amplitude of vibrating shell using piezoelectric ceramics (both lead-based and lead-free). The simulation results reveal that Pb0.83La0.17(Zr0.3Ti0.7)0.9575O3 (lead zirconate titanate sensor) and (K0.475Na0.475Li0.05)(Nb0.92Ta0.05Sb0.03)O3 (KNLNTS actuator) combination reduces the vibration amplitude of vibrating shell structure faster than lead zirconate titanate (sensor) and lead zirconate titanate (actuator) combination. Moreover, for complete replacement of lead-based piezoelectric ceramics, 0.885(Bi0.5Na0.5)TiO3–0.05(Bi0.5K0.5)TiO3–0.015(Bi0.5Li0.5)TiO3–0.05BaTiO3 (BNKLBT sensor) and KNLNTS (actuator) combination is a potential candidate for active vibration control application.
28 July 2016 in Journal of Intelligent Material Systems and Structures
In this study, the dynamic response and the active vibration control behavior of cantilever-type structure over wide temperature range (−70°C to 70°C) are investigated experimentally and numerically. A cantilever structure of titanium alloy integrated with the collocated piezoelectric ceramic (PZT-5H) was studied for effective vibration amplitude reduction. The experimental results are verified with the numerical results which show good agreement among them. For the numerical simulations, finite element formulation using first-order shear deformation theory is implemented. The nonlinear fuzzy logic controller is designed as multi-input single-output system using 49 rules and implemented both experimentally and numerically to perform active vibration control. The results show that even moderate fluctuations in the temperature under study can considerably influence the performance of the piezoelectric ceramics used as sensors and actuators resulting in degraded performance for active vibration control.
20 February 2015 in Journal of Intelligent Material Systems and Structures
The numerical simulations for active vibration control of the host structure using lead zirconate titanate–Pt-based functionally graded piezoelectric material are presented in this article. The material properties (both mechanical and electrical) of the lead zirconate titanate–Pt-based functionally graded piezoelectric material are graded in the thickness direction according to the volume fraction power law distribution. The finite element modeling using first-order shear deformation theory is implemented to predict static and dynamic responses of the vibrating structure. A constant negative velocity feedback controller is designed to provide closed-loop feedback control. Both static and dynamic controls of the host structure are numerically simulated to demonstrate the effectiveness of the proposed lead zirconate titanate–Pt-based functionally graded piezoelectric material. The numerical results show significant variation in sensing and actuating capability up to a certain volume fraction index (n).
18 February 2014 in International Journal of Applied Ceramic Technology