Membrane distillation is a growing technology that can address the growing problem of water shortage. The implementation of renewable energy and a reduction in the environmental impact of membrane production could improve the sustainability of this process. With this perspective, porous hydrophobic polyvinylidene fluoride (PVDF) membranes were prepared using triethyl phosphate (TEP) as a green solvent, using the non-solvent induced phase separation technique. Different amounts of carbon black were added to dope solutions to improve the photothermal properties of the membranes and to enable direct heating by solar energy. By optimizing the preparation conditions, membranes with porosity values as high as 87% were manufactured. Vacuum membrane distillation tests carried out using a concentrated NaCl solution at 50 °C showed distillate fluxes of up to 36 L/m2 h and a complete salt rejection. Some preliminary studies on the photothermal performance were also conducted and highlighted the possibility of using such membranes in a direct solar membrane distillation configuration.
Biochar is a carbon-rich material produced from biomass pyrolysis whose properties can be tailored for various applications, including soil improvement, water purification, and catalysis. Its light absorption capacity also makes it promising for solar-driven processes like water evaporation. Photothermal membrane distillation (PMD) combines membrane separation with light-induced heating for efficient water purification. Unlike conventional membrane distillation, PMD utilizes light-absorbing materials to enhance vapor pressure and overcome temperature polarization, a common issue in membrane distillation. This study explored the potential of biochars and activated biochars, as filler materials for photothermal membranes, in line with circular economy principles. The mixed matrix membranes were prepared in a single step, via non-solvent induced phase separation starting from a uniform dispersion of the filler in a polyvinylidene fluoride solution. These materials exhibited great heating performance, reaching surface temperature up to 36 °C under a 125 W/m2 light source. Increasing the biochar loading up to 15 wt.% resulted in an 85% increase in distillation flux under light irradiation.