Gel polymer electrolytes (GPEs) typically suffer from sluggish kinetics and interfacial instability at elevated temperatures and high voltages. Herein, 3-(trifluoromethyl)-1H-1,2,4-triazole (TTA) is employed to construct an ultrathin (~25 μm), robust, and homogeneous GPE. TTA acts as a molecular bridge, significantly improving compatibility between the PVDF-HFP (Poly(vinylidene fluoride-co-hexafluoropropylene)) matrix and LLZTO (Li6.4La3Zr1.4Ta0.6O12) fillers to create continuous ion-conducting pathways. Consequently, the TTA-GPEs exhibits high ionic conductivity (0.267 mS cm−1 at room temperature), low activation energy (0.181 eV), and an increased lithium-ion transference number (0.425). Advanced surface analysis reveals that TTA preferentially reacts to form a dense, gradient hierarchical interphase (solid electrolyte interphase/cathode electrolyte interphase, SEI/CEI) enriched with inorganic species (LiF, Li3N, and Li2S) on the inner side. This architecture suppresses parasitic reactions and lithium dendrite growth. Accordingly, NCM811(LiNi0.8Co0.1Mn0.1O2)//Li batteries with TTA-GPEs demonstrate stable cycling at 80 °C and 1C, retaining 57.68% capacity after 125 cycles—significantly outperforming benchmarks. This study offers a molecular engineering strategy to simultaneously optimize bulk transport and interfacial stability for high-energy-density solid-state batteries.
The demand for high-energy-density and fast-charging solid-state lithium metal batteries (SSLMBs) often subjects practical devices to internal thermal loads, making high-temperature operation a common operational condition rather than an isolated scenario. To address the interfacial degradation and dendrite growth accelerated by such thermomechanical stresses, we developed a composite gel electrolyte (CGE) by incorporating an optimal concentration of active Li6.4La3Zr1.4Ta0.6O12 (LLZTO) into a fluoropolymer network. The abundant Lewis acidic sites on the LLZTO surfaces promote competitive solvation decoupling by interacting with anions, thereby modulating the primary solvation sheath of Li+. This localized modulation lowers the lithium-ion migration activation energy to 0.248 eV and facilitates a dual-interfacial passivation mechanism. Specifically, a rigid, inorganic-rich solid electrolyte interphase (SEI) forms to suppress morphological instability at the lithium anode, while an organic-dominated cathode electrolyte interphase (CEI) enhances the oxidative stability up to 4.3 V. As a result, symmetric cells demonstrate stable electrodeposition for over 450 h at 80 °C and 0.5 mA cm−2. Furthermore, NCM811/Li full cells utilizing this CGEs exhibit significantly improved thermal resilience and cycling stability.