High-nickel ternary cathodes hold a great application prospect in solid-state lithium metal batteries to achieve high-energy density, but they still suffer from structural instability and detrimental side reactions with the solid-state electrolytes. To circumvent these issues, a continuous uniform layer polyacrylonitrile (PAN) was introduced on the surface of LiNi0.8Mn0.1Co0.1O2 via in situ polymerization of acrylonitrile (AN). Furthermore, the partial-cyclized treatment of PAN (cPAN) coating layer presents high ionic and electron conductivity, which can accelerate interfacial Li+ and electron diffusion simultaneously. And the thermodynamically stabilized cPAN coating layer cannot only effectively inhibit detrimental side reactions between cathode and solid-state electrolytes but also provide a homogeneous stress to simultaneously address the problems of bulk structural degradation, which contributes to the exceptional mechanical and electrochemical stabilities of the modified electrode. Besides, the coordination bond interaction between the cPAN and NCM811 can suppress the migration of Ni to elevate the stability of the crystal structure. Benefited from these, the In-cPAN-260@NCM811 shows excellent cycling performance with a retention of 86.8% after 300 cycles and superior rate capability. And endow the solid-state battery with thermal safety stability even at high-temperature extreme environment. This facile and scalable surface engineering represents significant progress in developing high-performance solid-state lithium metal batteries.
Gel polymer electrolytes (GPEs) typically suffer from sluggish kinetics and interfacial instability at elevated temperatures and high voltages. Herein, 3-(trifluoromethyl)-1H-1,2,4-triazole (TTA) is employed to construct an ultrathin (~25 μm), robust, and homogeneous GPE. TTA acts as a molecular bridge, significantly improving compatibility between the PVDF-HFP (Poly(vinylidene fluoride-co-hexafluoropropylene)) matrix and LLZTO (Li6.4La3Zr1.4Ta0.6O12) fillers to create continuous ion-conducting pathways. Consequently, the TTA-GPEs exhibits high ionic conductivity (0.267 mS cm−1 at room temperature), low activation energy (0.181 eV), and an increased lithium-ion transference number (0.425). Advanced surface analysis reveals that TTA preferentially reacts to form a dense, gradient hierarchical interphase (solid electrolyte interphase/cathode electrolyte interphase, SEI/CEI) enriched with inorganic species (LiF, Li3N, and Li2S) on the inner side. This architecture suppresses parasitic reactions and lithium dendrite growth. Accordingly, NCM811(LiNi0.8Co0.1Mn0.1O2)//Li batteries with TTA-GPEs demonstrate stable cycling at 80 °C and 1C, retaining 57.68% capacity after 125 cycles—significantly outperforming benchmarks. This study offers a molecular engineering strategy to simultaneously optimize bulk transport and interfacial stability for high-energy-density solid-state batteries.
The demand for high-energy-density and fast-charging solid-state lithium metal batteries (SSLMBs) often subjects practical devices to internal thermal loads, making high-temperature operation a common operational condition rather than an isolated scenario. To address the interfacial degradation and dendrite growth accelerated by such thermomechanical stresses, we developed a composite gel electrolyte (CGE) by incorporating an optimal concentration of active Li6.4La3Zr1.4Ta0.6O12 (LLZTO) into a fluoropolymer network. The abundant Lewis acidic sites on the LLZTO surfaces promote competitive solvation decoupling by interacting with anions, thereby modulating the primary solvation sheath of Li+. This localized modulation lowers the lithium-ion migration activation energy to 0.248 eV and facilitates a dual-interfacial passivation mechanism. Specifically, a rigid, inorganic-rich solid electrolyte interphase (SEI) forms to suppress morphological instability at the lithium anode, while an organic-dominated cathode electrolyte interphase (CEI) enhances the oxidative stability up to 4.3 V. As a result, symmetric cells demonstrate stable electrodeposition for over 450 h at 80 °C and 0.5 mA cm−2. Furthermore, NCM811/Li full cells utilizing this CGEs exhibit significantly improved thermal resilience and cycling stability.