Food packaging is the largest segment of the global plastics market, yet its low degradability and limited performance in preserving perishable goods highlight the need for more sustainable alternatives. This study investigates the use of industrial softwood kraft lignin, a renewable polyol, and γ-valerolactone (GVL), an excellent green lignin solvent, to synthesize bio-based polyurethane (PU) coatings for recycled linerboard. PU was synthesized with hexamethylene diisocyanate (HDI), GVL, and 1,4-diazabicyclo[2.2.2]octane (DABCO) as a catalyst and applied to recycled linerboard (166.6 g/m2) at three coating weights: 13.5, 16.5, and 23.5 g/m2. The coating enhanced water resistance, as shown by the reduced water vapor transmission rate (WVTR) and Cobb1800 values. Oil resistance was also significantly improved, reaching a Kit rating of 11 at the highest coating weight. Mechanical performance was maintained or enhanced, with increases in ring crush strength (RCT) and tensile index. These findings confirm the effectiveness of lignin-based PU in improving both the barrier and mechanical properties of packaging paper. Additionally, this approach presents an environmentally responsible alternative to petroleum-based coatings, adding value to lignin as a byproduct of the pulp and paper industry and supporting the transition toward more circular and sustainable packaging materials.
Iron ore pellets are raw materials used by the iron and steel industries. In these applications, flotation process has been used for increasing the iron content. In this process, starch is normally used as a depressant and amine as a collector. The main objective of this study was to compare the starch with different alternatives of biopolymers. Such depressant was developed in the US Patent granted at number 9,421,556 named XMC. The best XMC produced in this work (XMC SB) shown iron content at tails fraction (RJ) and at concentrate fraction (CO) of 39.4% and 67.2%, respectively while starch shows 36.5% and 67.3%, respectively, at the same SiO2 level. Additionally, mass recovery was 63.3% and 65.0%, respectively for XMC SB and starch, and metallic recovery were 75.2% and 79.0%, respectively for XMC SB and starch. Therefore, the major advantage of XMC as iron ore depressant will be regard its sustainability.
The packaging sector presents a significant sustainability challenge, particularly due to the prevalence of plastic packaging. There is a growing interest in sustainable packaging alternatives. The main challenge is to develop packaging with comparable and competitive characteristics. In this context, this manuscript aims to evaluate the performance of lignin-based polyurethane applied as a coating on recycled linerboard. Industrial softwood kraft lignin was fully characterized in terms of purity, functional groups (FTIR and 31P NMR) and molecular weight (GPC). Aiming at coating applications, the lignin sample was solubilized in dimethyl sulfoxide (DMSO) and used as a polyol substitute in the reaction, replacing polyethylene glycol (PEG) at levels of 70%, 80%, and 90%. Subsequently, hexamethylene diisocyanate (HDI) was added to initiate polyurethane formation. After polymerization, the coating was applied in multiple layers onto the linerboard paper. Regarding water resistance, all applications demonstrated effectiveness. The lignin-based polyurethane coating improved the Cobb1800 with reductions in the range of 1147.4 to 1155.8 g/m2 compared to the uncoated paper. Water vapor permeability was reduced by more than 94%. In the evaluation of oil resistance, samples with three layers and 90% lignin replacement performed particularly well, achieving a high value in a kit test for oil and grease (kit test number 12). These results highlight a promising approach to paper-based packaging, with potential applications across a wide range of products.
Reducing the consumption of single-use plastics is becoming reality in today’s society. More than 300 million tons of plastic waste are generated annually globally, with a significant portion coming from disposable food packaging. The development of sustainable paper-based packaging coated with biopolymers has gained prominence in the packaging sector due to its biodegradability, non-toxicity and biocompatibility properties. These materials offer additional advantages, such as resistance to moisture and oxidation, which increases the durability of packaged food products. Improving the knowledge and their applications are essential to ensure the sustainability of production processes and meet growing environmental and economic demands. However, ongoing research is needed to overcome challenges such as production scalability and the high cost of some biopolymers in order to ensure their viability on a large scale. Additionally, it has the potential to stimulate innovation in the packaging industry, offering solutions that align sustainability and competitiveness in the market.