Rubber is an engineering polymer of interest in most industrial sectors. In gasketed plate heat exchangers (GPHEs), these elements comprise gaskets that are responsible for sealing the system under high levels of compression, temperature and pressure. Therefore, it is a necessity to understand how operating conditions affect GPHE structural behavior and sealing performance, regarding rubber materials and features. This work aims at determining GPHE integrity and mechanical characteristics with the aid of sealing performance experiments and strain gauge measurements at critical plate locations in a real equipment and in prototypes consisting of GPHE components. Hydrogenated Nitrile Butadiene Rubber (HNBR) and Ethylene-Propylene-Diene Rubber (EPDM) gasket materials were evaluated. Based on compression strength experiments, the effects of the number of plates and the compression level on the system stiffness in the direction where the quasi-static compression load is applied have been determined. Stable compression strength behavior was attained with prototypes containing six gaskets or more. The combined effects of pressure load and compression levels, and rubber material on sealing performance were obtained with prototypes comprising six gaskets. Stress analysis was possible with plate deformation measurements in a heat exchanger comprising twenty plates. Highest stress levels were obtained with EPDM gaskets during tightening. It is conjectured that higher operation loads can occur with the latter material. Empirical correlations relate sealing capacity and compression level for EPDM and HNBR gaskets.
Nitrile rubber (NBR) is widely used in components across several industrial sectors due to its properties that are suitable for engineering applications. Surface-environment interactions often limit performance, which depends critically on surface characteristics, especially barrier properties for sealing and membrane applications. This study investigates the effects of low-pressure direct-current pulsed plasma treatment in O2/Ar atmospheres on NBR surfaces to generate oxidized layers. Samples were treated at duty cycles of 30% and 70% with oxygen contents of 20% (low) and 80% (high). Nanoindentation post-treatment revealed increased surface contact stiffness, while differential scanning calorimetry (DSC) confirmed unchanged bulk properties. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy indicated the incorporation of oxidized groups and reduced C–H signals. The highest duty cycles (70%) improved sputtering species production, and the highest oxygen content (80%) enhanced O ion creation and surface oxidation, as evidenced by optical emission spectroscopy (OES) and X-ray photoelectron spectroscopy (XPS). XPS depth profiling showed a rising oxidation profile (oxygen implantation) at the treated surface. Based on a plasma-surface interaction mechanism, the condition with 80% oxygen and 30% duty cycle yields the highest surface oxidation level. It potentially enhances barrier properties, contributing to plasma-parameter optimization for tailored NBR surface modifications.