The computer model that allows predicting the temperature distribution during local ion nitriding with hollow cathode effect (HCE) and depth of the diffusion zone after the treatment of part "lever of downhole profilometer" was developed. The influence of the HCE on the temperature distribution for the part was studied.
This article explores the utilization of cathodic-arc deposition Cr-Al overlay coatings as oxidation protection for Ti-Al-Nb intermetallic alloys. The primary objective is to investigate PVD Al-Cr coatings deposited via cathodic-arc deposition without subsequent vacuum annealing. The microstructure, phase, and chemical composition of the coatings were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction analysis. Isothermal exposure of samples in a laboratory air furnace was conducted, revealing the efficacy of Cr-Al coatings in protecting the Ti49-11Al-40Nb-1.5Zr-0.75V-0.75Mo-0.2Si (mass%) intermetallic alloy VTI-4 against oxidation. The findings highlight that the as-deposited coatings possess a layered structure and contain Al-Cr intermetallics. Post-exposure to the furnace without prior vacuum annealing results in coatings exhibiting a porous microstructure, raising concerns regarding oxidation protection. This investigation of Cr-Al coatings on a VTI-4 alloy substrate yields valuable insights into their nanolaminate structure and challenges associated with aluminum droplet fractions. The proposed additional vacuum heat treatment at 650 °C for 500 h effectively homogenizes the coating, leading to predominant Cr2Al and Ti-Al phases. Additionally, the formation of diffusion layers at the “coating–substrate” interface and the presence of oxide barriers contribute to the coatings’ heat resistance. Our research introduces possibilities for tailoring coating properties for specific high-temperature applications in aerospace, energy, or industrial contexts. Further refinement of the heat treatment process offers the potential for developing advanced coatings with enhanced performance characteristics.
10 July 2017 in Journal of Physics: Conference Series
The paper describes the influence of hydrogen content in a working gas on diffusion processes at ion nitriding of martensitic and austenitic steels. It is found that the presence of hydrogen in a working space of a vacuum chamber contributes to the increase in nitrogen diffusion depthward the material. Dependence of the hardened layer thickness and depth distribution of microhardness on gaseous composition was obtained. The structure of steel nitrated layer with various content of hydrogen in a vacuum chamber was studied.
In this work, for the first time, we applied and determined the mechanical characteristics of protective coatings made of high-entropy alloy (TiZrVCrAl)N with different architectures onto the surface of Ti-6Al-4V alloy with the initial coarse-grained and ultrafine-grained structure using arc physical vapor deposition. We designed and prepared three coating architectures: a monolayer nitride coating (TiZrVCrAl)N, a multilayer coating consisting of nine alternating layers of TiZrVCrAl and (TiZrVCrAl)N, and a multilayer coating consisting of 720 alternating layers of (TiZrVCrAl)N and TiN, with a total thickness not exceeding 2 microns. We evaluated their protective performances by nanoindentation and scratch tests. Importantly, the effect of the substrate microstructure on the coatings’ performance is investigated by comparing their mechanical behavior on coarse-grained and ultrafine-grained Ti-6Al-4V. Our experimental results show that the coating performance improves with increasing number of layers in the coating, and this effect is even more pronounced for the multilayer coating deposited on the ultrafine-grained titanium alloy substrate. We also find that the (TiZrVCrAl)N/TiN (720 layers) multilayer coating deposited on the UFG Ti-6Al-4V alloy substrate exhibits the highest H/E- and H3/E2-values, indicating the coating’s high innovative potential for performance in extreme conditions. The origins of this phenomenon are analyzed and discussed.
The impact of hydrogen content from 10 to 30% in the mixture of operating gas environment on the growth kinetics and structure of a hardened layer during ion nitriding of martensite and pearlite steels has been studied. It is stated that hydrogen in the vacuum chamber in the range from 10 to 30% contributed to a 1.2-time increase of nitrogen diffusion rate in 16MnCr5 steel and 1.3-time increase in A290C1M steel. The dependence of the hardened layer thickness and microhardness distribution over the depth on the gas environment composition is stated. The structure of the nitrided layer of steels at different hydrogen contents during ion nitriding is studied.