Noah Salk

Dr. Noah Salk

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 February 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
TBThanatheepan Balachandran
Thanatheepan Balachandran
NSNoah Salk
Noah Salk
JXJianqiao Xiao
Jianqiao Xiao
SSSamith Sirimanna
Samith Sirimanna
UBUijong Bong
Uijong Bong
KHKiruba S Haran
Kiruba S Haran
This paper summarizes the efforts in developing the world's most power-dense and efficient electric aircraft propulsion motor through the synergistic CHEETA (Center for High-Efficiency Electrical Technologies for Aircraft) and CRUISE (CRyogen-free Ultra-hIgh field Superconducting Electric motor) projects. The partially superconducting (SC) motor being developed under the CRUISE program features an inrunner rotor with an embedded cryocooler and high-temperature superconducting (HTS) field windings, and a slotless stator armature composed of room-temperature conductors. The CHEETA machine has the same high-level features as CRUISE, however, the armature is also cryogenically cooled to achieve the highest possible efficiency and power density. To close the machine design, four key challenges were addressed: (1) integrate a compact and rotationally-compatible cryocooler into the shaft bore with enough heat lift to cool the HTS coils to sub-50 K; (2) design a rotor cryogenic thermal management system (TMS) that minimizes the heat load to the cryocooler's cold head while simultaneously transferring torque; (3) develop robust, conduction-cooled and quench tolerant HTS magnets; (4) construct an air-core armature that maximizes electrical loading and exhibits low ac losses. In the case of CRUISE, successfully overcoming these challenges resulted in a 10 MW design that achieves 40 kW/kg continuous specific power (127 Nm/kg specific torque) and 99.4% efficiency.

19 December 2022 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
DLDongsu Lee
Dongsu Lee
TBThanatheepan Balachandran
Thanatheepan Balachandran
SSSamith Sirimanna
Samith Sirimanna
NSNoah Salk
Noah Salk
AYAndy Yoon
Andy Yoon
KHKiruba S. Haran
Kiruba S. Haran
This paper describes the detailed design and development of a 300 kW permanent magnet (PM) synchronous motor for electric aircraft propulsion, taking into consideration manufacturability, balancing ease, and cost of high-volume production with motor performance. The motor consists of a slotless stator structure with custom litz wire and an outer rotor with a Halbach PM array. The design of the proposed motor is based on multi-physics performance including electromagnetic field, thermal and mechanical analysis. For ease of manufacturing and economies of scale, the detailed design is refined by altering the PM segment number, PM shape and litz wire construction. The impacts of changing these parameters are evaluated in detail using analytical and finite element methods. The simulation results are compared with experimental results in terms of torque production, back electromotive force, and current level.

1 June 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
TBThanatheepan Balachandran
Thanatheepan Balachandran
DLDongsu Lee
Dongsu Lee
NSNoah Salk
Noah Salk
JXJianqiao Xiao
Jianqiao Xiao
KHKiruba S. Haran
Kiruba S. Haran
A significant challenge in the design of fully superconducting (SC) machines is managing ac losses in the SC armature. Recent developments in MgB2 superconducting conductors promise low ac loss conductors suitable for fully SC machines. This paper presents an optimized design targeting low losses and low weight for a 10-MW fully SC generator suitable for offshore wind turbine applications. An outer rotor air-core machine topology is investigated to optimize the design with low weight and low losses. An active shielding concept is used to minimize the pole count without adding excessive weight. This enables a reduction in the electrical frequency for a practical design by a factor of 4 to 5 over current designs, driving ac losses and active components weight lower by an order of magnitude. In this study, armature current is varied to control electrical and magnetic loading in order to minimize losses. A pole count study is conducted to identify the design space suitable for MW scale machines. A comparison is made between active shield, passive shield and a hybrid topology to address the benefits of an active shield for weight reduction. Results suggest that low-pole-count designs with MgB2 conductors will enable machines with less than 1 kW of ac losses.

15 June 2022 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
TBThanatheepan Balachandran
Thanatheepan Balachandran
NSNoah Salk
Noah Salk
DLDongsu Lee
Dongsu Lee
MSM. D. Sumption
M. D. Sumption
KHKiruba S. Haran
Kiruba S. Haran
Recent developments in low ac loss MgB $_{2}$ conductors are of significant importance given renewed interest in fully superconducting (SC) machines. Evaluating ac losses in fully SC machines is a critical step in developing feasible designs. In fully SC machines, SC armature windings experience non-uniform rotating magnetic fields, with spatial and temporal harmonics, which has an undisputed impact on ac losses. Existing ac loss models in the literature, which have been validated for stationary sinusoidal external fields, were extended to constant amplitude rotating fields. There is not enough research on validating the ac loss models for rotating non-uniform magnetic fields with harmonics. This paper proposes simplified methods to estimate the ac losses in conductors with non-uniform rotational applied magnetic fields experienced by the armature in a machine’s environment. Extended analytical models are proposed to estimate the ac loss in single and multi-filament MgB $_{2}$ conductors. The models are then compared against finite element analysis (FEA) results with Power Law loss estimation to evaluate model fidelity.

13 October 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TBThanatheepan Balachandran
Thanatheepan Balachandran
SSSamith Sirimanna
Samith Sirimanna
UBUijong Bong
Uijong Bong
RVRaatan Venkataraaman
Raatan Venkataraaman
TOTim O’COnnell
Tim O’COnnell
KHKiruba S. Haran
Kiruba S. Haran
Hinetics is developing a megawatt-scale superconducting motor for high power density applications such as electric aviation propulsion, marine propulsion, and remote data center power generation. To de-risk the full-scale system, a scaled-down demonstrator rotor nicknamed Baby Yoda was designed, built, and tested. This prototype features no-insulation high-temperature superconducting (HTS) coils on the rotor and a conventional stator. The rotor is cryogenically cooled using an onboard closed-loop cryocooler. The superconducting rotor was retrofitted onto a commercial induction motor frame to enable rapid system integration and testing. Two test campaigns were conducted: (1) system-level performance testing and (2) extended operation for reliability assessment. Both campaigns were successfully completed, demonstrating stable operation and validating key design and integration risks for the full-scale system. This paper presents the design methodology, analytical approach, assembly process, and experimental results of the risk-reduction motor.

21 March 2022 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
NSNoah Salk
Noah Salk
CCChathan M. Cooke
Chathan M. Cooke
This article introduces a semi-analytical method of predicting ac loss in commercial Litz wires. Simple finite-element simulations are used to compute the resultant proximity fields in a coil system of arbitrary geometry. The approach addresses non-ideal Litz wire construction by applying a surrogate skin effect model to inform and distribute the current over the cross Section into segmented layers. This simplifies the finite-element problem into a 2-D, dc simulation with a low number of mesh elements. Analytical solutions are then used to compute frequency-dependent loss due to skin and proximity effect. The method is demonstrated using two 14 American Wire Gauge (AWG) equivalent Litz wires with very different constructions and is validated with experimental results from several coil configurations. Finally, an appeal is made to commercial Litz wire manufacturers to provide an empirical “fabrication factor” specification that would allow consumers to predict the performance of a conductor in their application.