Dongsu Lee

Dongsu Lee

Auto-generated profile, based on publicly available information

Dongsu Lee

Hinetics LLC, Champaign, IL, USA

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2022 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
DLDongsu Lee
Dongsu Lee
TBThanatheepan Balachandran
Thanatheepan Balachandran
SSSamith Sirimanna
Samith Sirimanna
NSNoah Salk
Noah Salk
AYAndy Yoon
Andy Yoon
KHKiruba S. Haran
Kiruba S. Haran
This paper describes the detailed design and development of a 300 kW permanent magnet (PM) synchronous motor for electric aircraft propulsion, taking into consideration manufacturability, balancing ease, and cost of high-volume production with motor performance. The motor consists of a slotless stator structure with custom litz wire and an outer rotor with a Halbach PM array. The design of the proposed motor is based on multi-physics performance including electromagnetic field, thermal and mechanical analysis. For ease of manufacturing and economies of scale, the detailed design is refined by altering the PM segment number, PM shape and litz wire construction. The impacts of changing these parameters are evaluated in detail using analytical and finite element methods. The simulation results are compared with experimental results in terms of torque production, back electromotive force, and current level.

28 August 2019 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
DLDongsu Lee
Dongsu Lee
AYAndy Yoon
Andy Yoon
SSSamith Sirimanna
Samith Sirimanna
SSSheppard Salon
Sheppard Salon
KHKiruba S. Haran
Kiruba S. Haran
This paper presents the impacts of manufacturing tolerances on a 1 MW slotless permanent magnet synchronous motor used in an aircraft propulsion system. The motor was designed using multiphysics analysis of electromagnetics, mechanical structure and thermal analysis to obtain a high torque density. It has several governing characteristics, including a Halbach permanent magnet arrangement, slotless stator windings, an outer rotor, lower reactance and a high current density. Since the current density of this design is high, the existence of circulating currents should be considered for safe operation under different levels of manufacturing tolerances. In particular, the low reactance of the motor and the slotless structure greatly contribute to increase the circulating current. Therefore, this paper analyzes various factors affecting the circulating current such as eccentricity and imbalanced windings. Finally, an analytical model is used to calculate magnetic and electric loading, and non-linear finite element analysis are applied and compared to obtain the machine performance.

13 April 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
HJHo-Chang Jung
Ho-Chang Jung
DKDeok-Jin Kim
Deok-Jin Kim
Sang-Yong JungSang-Yong Jung
Sang-Yong Jung
DLDongsu Lee
Dongsu Lee
The electrical winding changeover technique (EWCT) in hybrid electric vehicles will become key to improving the efficiency maps over the whole operating range in the future. This technique can enhance a flux weakening control and reduce a back electromotive force at high speed operation by changing the effective winding turn number. It can increase the efficiency at high speed by a reduction of winding resistance. In this paper, the motor is operated with two step modes, where the winding turn number of the first step mode is twice that of the second step mode. Each step mode is addressed in terms of torque production, back-EMF, voltage and efficiency. Finally, an optimal design of the interior permanent magnet synchronous motor with EWCT is implemented for maximizing the efficiency map based on finite element analysis.

2 July 2021 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
TBThanatheepan Balachandran
Thanatheepan Balachandran
AYAndy Yoon
Andy Yoon
DLDongsu Lee
Dongsu Lee
JXJianqiao Xiao
Jianqiao Xiao
KHKiruba S. Haran
Kiruba S. Haran
Offshore wind turbines are the key enabling technology to increase the green energy penetration in the electricity market. Increasing the power generation per tower and reducing the levelized cost of energy are the two significant problems faced by wind turbine manufacturers. Traditional turbine manufacturers use rare-earth permanent magnets (PMs) to increase the air-gap flux density and maximize the machine outer diameter (OD) to increase the torque output. Since the air-gap flux density achievable with available PM is limited, increasing the power output of a traditional generator invariably leads to a significant increase in the volume and mass on top of the turbine tower and associated manufacturing, transportation, and installation costs. Superconducting (SC) wind turbine generators offer 5 to 10 times the air-gap flux density of a PM generator, and a corresponding increase in specific power and power density. Previous MW scale SC wind turbines designs used heavy back iron in the design, iron saturation limits the achievable air-gap flux density in the designs and resulted in bulky generators and moderate efficiency. In this article, a hybrid design approach is proposed to reach an ultrahigh field (5 to 10 times of PM air-gap flux density) and high efficiency (>98%) SC wind turbine for offshore wind turbine. An additional stray field limitation is introduced for safety concerns and shielding techniques are explored. Electromagnetic, mechanical, and cooling designs are provided to support the feasibility of proposed SC wind turbines. A nacelle integration inside a commercially available 6 MW wind turbine is shown to demonstrate the size comparison of the proposed generator.

11 April 2019 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
DLDongsu Lee
Dongsu Lee
TBThanatheepan Balachandran
Thanatheepan Balachandran
HCHan-Wook Cho
Han-Wook Cho
KHKiruba Haran
Kiruba Haran
This paper presents an electromagnetic (EM) analysis and feasibility design study of a 10 MW air-core fully superconducting (SC) generator for off-shore wind turbine applications. This machine topology uses MgB 2 SC wires in both armature and field windings to reduce the generator cost. To reduce the weight of the machine, stator iron core in the traditional SC machine design is replaced with shield coils to contain the flux inside the machine. This air-core design allows the air-gap flux density to be increased without saturation to achieve an increased power density in machine design. Further, eliminating the iron core also eliminates the core losses. This is an attractive feature for off-shore wind turbine applications where machine weight can be reduced with increased efficiency. Preliminary EM studies are performed on a 10 MW, 10 r/min fully SC air-core machine design and its associated ac losses are evaluated. Design specification of the machine is provided with the armature, field, and shield winding parameter details. Finite element (FE) analysis is used to evaluate the flux density and torque profile of the machine. To reduce the ac losses in the armature coils, magnetic flux density at the armature winding is set to be 2 T. The preliminary results show this fully SC air-core generators show better performance in ac losses compared to the similar fully SC MW wind turbine designs.

1 June 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
TBThanatheepan Balachandran
Thanatheepan Balachandran
DLDongsu Lee
Dongsu Lee
NSNoah Salk
Noah Salk
JXJianqiao Xiao
Jianqiao Xiao
KHKiruba S. Haran
Kiruba S. Haran
A significant challenge in the design of fully superconducting (SC) machines is managing ac losses in the SC armature. Recent developments in MgB2 superconducting conductors promise low ac loss conductors suitable for fully SC machines. This paper presents an optimized design targeting low losses and low weight for a 10-MW fully SC generator suitable for offshore wind turbine applications. An outer rotor air-core machine topology is investigated to optimize the design with low weight and low losses. An active shielding concept is used to minimize the pole count without adding excessive weight. This enables a reduction in the electrical frequency for a practical design by a factor of 4 to 5 over current designs, driving ac losses and active components weight lower by an order of magnitude. In this study, armature current is varied to control electrical and magnetic loading in order to minimize losses. A pole count study is conducted to identify the design space suitable for MW scale machines. A comparison is made between active shield, passive shield and a hybrid topology to address the benefits of an active shield for weight reduction. Results suggest that low-pole-count designs with MgB2 conductors will enable machines with less than 1 kW of ac losses.