In this work, we demonstrate the first achievement in heteroepitaxial growth of β-Ga2O3 thin films on single crystalline diamond (111) wafers using RF magnetron sputtering. A single monoclinic (β-phase) structure with a monofamily { 01} plane was obtained. XRD pole figure shows ( 02) and (002) textures of the ( 01) β-Ga2O3 plane parallel to (111) diamond with six distinct rotational domains, confirming successful epitaxial growth. Collectively, this research provides valuable insights into the epitaxial growth of β-Ga2O3 on diamond via sputtering, paving the way for scalable β-Ga2O3/diamond heterostructures for future electronic and optoelectronic applications with not only high performance but also effective self-thermal management.
Ultrananocrystalline diamond (UNCD)/nonhydrogenated amorphous carbon (a-C) composite films were deposited on unheated WC containing Co by coaxial arc plasma deposition. The hardness of the film is 51.3 GPa, which is comparable with the highest values of hard a-C films deposited on nonbiased substrates. The deposited film is approximately 3 µm thick, which is one order larger than that of hard a-C films. The internal compressive stress is 4.5 GPa, which is evidently smaller than that of comparably hard a-C films. The existence of a large number of grain boundaries in the UNCD/a-C film might play a role in the release of the internal stress.
Hard X-ray photoemission spectroscopy (HAXPES) was employed for the structural evaluation of ultrananocrystalline diamond/amorphous carbon (UNCD/a-C) composite films deposited on cemented carbide substrates, at substrate temperatures up to 550 °C by coaxial arc plasma deposition. The results were compared with those of soft X-ray photoemission spectroscopy (SXPES). Since nanocrystalline diamond grains are easily destroyed by argon ion bombardment, the structural evaluation of UNCD/a-C films, without the argon ion bombardment, is preferable for precise evaluation. For samples that were preserved in a vacuum box after film preparation, the sp3 fraction estimated from HAXPES is in good agreement with that of SXPES. The substrate temperature dependencies also exhibited good correspondence with that of hardness and Young’s modulus of the films. On the other hand, the sp3 fraction estimated from SXPES for samples that were not preserved in the vacuum box had an apparent deviation from those of HAXPES. Since it is possible for HAXPES to precisely estimate the sp3 fraction without the ion bombardment treatment, HAXPES is a feasible method for UNCD/a-C films, comprising nanocrystalline diamond grains.
It has been extremely difficult for nanodiamond composite (NDC) films to be deposited on Ti due to a large thermal expansion coefficient difference. The native oxide layer on Ti is another problem preventing the appropriate adhesion of NDC films and subsequent delamination. In this work, innovative room temperature adhesion of 3 μm NDC films with 54 GPa hardness on Ti substrates was accomplished via a hybrid system of ion etching gun and coaxial arc plasma deposition (CAPD). Ar+ plasma etching is capable to terminate the superficial TiO2 layer and manipulates substrate morphology during CAPD provides instantaneous deposition of NDC films at room temperature.