Biological structures achieve remarkable material performance owing to naturally assembled structures that extend from the molecular to macro‐scale. Synergy among constituents of various length scales yields lightweight, hierarchically structured materials with properties superior to those of individual components. To replicate nature's ingenuity, this work emulates the cylindrical core‐shell structure found in osteons and bamboo, utilizing Halloysite Nanotubes (HNTs) and Glass Fibers (GFs) in a semi‐crystalline polymer matrix. HNTs are environmentally friendly, naturally occurring tubular aluminosilicates with high aspect ratios, large lumen volumes, and low cost, and are readily dispersible in polymer matrices. Here, hierarchical reinforcement is achieved through controlled electrostatic assembly of HNTs onto GFs and subsequent trans‐crystallization‐encapsulation. This cylindrical core‐shell architecture yields composites with exceptional mechanical performance, superior thermal management (insulation/stability), improved industrial processability, and reduced flame propagation speed. Compared to the current industrial composite substitute for metallic structural components, the hybrid composites exhibit a remarkable 84% increase in impact strength, 27% increase in specific tensile strength, 56% increase in tensile toughness, and 30% in specific flexural strength, accompanied by a 20% weight reduction and a 255% increase in processability (melt‐flow index). This scalable assembly strategy marks a cornerstone in lightweight multifunctional materials development, to conquer future sustainability targets.
This study develops a kinetic model that captures poly-ether-ether-ketone (PEEK) crystallization over a temperature window from glass transition () to melting () temperature, and across cooling rates from 5 to ~103 °C/min. The framework is a parallel dual-Nakamura formulation whose isokinetic parameters {} are obtained from a bi-level non-linear regression of isothermal crystallization tests conducted using a flash-differential scanning calorimeter (FSC). The weight partitions the faster primary and slower secondary crystallization and is represented by a physics-based analytical function that captures its dome-shaped temperature dependence. A maximum isothermally achievable enthalpy function is introduced so that the model predicts enthalpy natively under arbitrary thermal profiles. To extend this isothermal backbone to non-isothermal conditions, two explicit cooling-rate-dependent scalars are introduced, and , which shift and limit attainable crystallinity at high cooling rates respectively. Finally, a rate-dependent induction time relation is added to adjust the onset of crystallization. Calibrating these rate functions against non-isothermal experiments, while keeping the isokinetic parameters fixed, yields a single isothermal–non-isothermal model that predicts under arbitrary profiles. Model performance is validated using an interrupted FSC experiment with a multi-segment cooling program that mimics a local transient thermal history of PEEK during additive manufacturing. The sample is cooled through successive constant-rate segments with intermittent quench–remelt cycles to probe the accumulated crystallinity along the path. Without additional fitting, the model predicts the measured enthalpy evolution with R2 ≈ 0.95. The framework thus provides a practical route for predicting polymer crystallinity under processing-relevant thermal histories.