This work aimed to prepare nanocellulose-based Pickering emulsions using cinnamon essential oil. Different formulations were investigated by varying the preparation time, homogenization speed, oil and nanocellulose concentration, and morphology. The emulsions were first characterized by droplet size, morphologies, and storage stability. The Design of Experiments (DoE) was used to evaluate the parameter’s effects on the emulsions’ stability, and the emulsions with optimum particle size and stability were evaluated by antimicrobial activity. The more stable emulsions required higher energy in the system to obtain efficient emulsification. The cellulose nanocrystal (CNC) emulsions showed a 30% oil volume as a constant to obtain a low creaming index (34.4% and 42.8%) and zeta potential values around −29 mV, indicating an electrostatic stabilization. The cellulose nanofiber (CNF) emulsions showed 100% stability after a month using a 20% oil volume as a constant and Zeta potential values around −15 mV, indicating a steric stabilization. CNF-emulsions’ inhibition halos for Bacilus subtilis were 30.1 ± 3.7% smaller than those found in CNC-emulsions (65 ± 2.9 mm), while Pseudomonasaeruginosas almost do not present differences in the inhibition halos. These results suggest that the nanocellulose morphology may promote a regulation on the EO migration to the medium, as well that this migration ratio does not affect the bacteria.
1 November 2019 in International Journal of Biological Macromolecules
The paper industry primary waste is usually deposited in landfills or incinerated. This material has a high content of lignocellulosic components, which could be converted to cellulose nanostructures (CNS). This study aimed to compare compositional (Fourier transform infrared spectroscopy), thermal (thermogravimetric analysis), morphological (scanning electron microscopy) and dimensional (dynamic light scattering and atomic force microscopy) properties of CNS obtained through chemical and mechanical isolation processes. The FTIR results showed similar chemical bonding for both nanostructures, which indicated presence of cellulose and lignin. Their average size was 170 nm and 209 nm for chemical and mechanical processes, respectively. The morphology of SEM images showed a compact structure and the chemical isolation presents smaller CNS agglomeration than mechanical. TGA results showed higher thermal stability for CNS-chemical than CNS-mechanical samples and AFM images indicate the CNS morphologies, which showed nanoroads for CNS-chemical and nanoneedles for CNS-mechanical.