According to this study’s findings, slope stability problems in open-pit coal mines can be avoided, and mine wall collapse can be effectively mitigated by the use of cut-and-backfill mining techniques. The main research results are as follows: (1) The stope and waste rock’s geotechnical, physical, and mechanical characteristics were gathered and examined; the geotechnical and mechanical characteristics found in this study largely satisfy the criteria for slope stability analysis. (2) Cemented paste backfill (CPB) materials were made of mine waste rock and fly ash at a desired ratio, mixed with cement as a bond material, and were tested in the laboratory, using a combination of cement percentages of 6%, 8%, and 10% for the cement content and 25%, 30%, 35%, and 40% for the fly ash content, to determine the ideal mix for artificial ground support in underground mines, taking into account both economic and performance factors. (3) By using this model, the changes in CPB strength were investigated under various factors influencing the cement ratio, and limit equilibrium modeling was used with the FLAC-Slope 8.1 program with different cement paste backfill ratio to calculate the factor of safety for each cement percentage after 1 day, 3 days, 7 days, and 28 days of curing time (CT) to obtain the optimum compressive strength and shear straight of cemented paste backfill with high paste fill shear strength on the slope. (4) The research results are of great significance for the safety of important facilities in open-pit mines and provide a basis for the design and safety implementation of open-pit slope engineering.

Mine heat hazards have resulted in large amounts of high-quality coal resources in deep that cannot be mined. The mining industry is paying more and more attention to the extraction and utilization of geothermal energy in mines, while at the same time reducing the underground temperature to realize co-extraction of coal and heat. In addition, coal mines tend to burn large amounts of coal to heat mine buildings and provide hot water for workers’ daily baths, creating operating costs and increasing greenhouse gas emissions. Therefore, it is of great significance to investigate the feasibility of extracting geothermal energy to provide the daily heat load for mines. Currently, there is little research on the feasibility of geothermal energy extraction and utilization in productive mines instead of abandoned mines. In this study, according to the actual situation of Xinhu mine in eastern China, a combined geothermal water system and heat-pump heating system is proposed, aiming to effectively realize mine cooling and geothermal exploitation and utilization. The geothermal storage capacity in the area is analyzed, and an economic analysis is developed. The economic analysis indicates that the main factors affecting the feasibility of the system are the number of mine users, the distance from the geothermal production well to the mine buildings, and the coal price. The research shows that the economic efficiency of the system is better when the heating scale is larger and the distance is smaller. As coal prices rise, the combined geothermal water and heat-pump heating system will be more economical than traditional coal heating. If a mine has 2000 workers, the application of this system can prevent 334.584 t of CO₂ emissions per year.