The aerosolization process of fungal propagules of three species ( Aspergillus versicolor , Penicillium melinii , and Cladosporium cladosporioides ) was studied by using a newly designed and constructed aerosolization chamber. We discovered that fungal fragments are aerosolized simultaneously with spores from contaminated agar and ceiling tile surfaces. Concentration measurements with an optical particle counter showed that the fragments are released in higher numbers (up to 320 times) than the spores. The release of fungal propagules varied depending on the fungal species, the air velocity above the contaminated surface, and the texture and vibration of the contaminated material. In contrast to spores, the release of fragments from smooth surfaces was not affected by air velocity, indicating a different release mechanism. Correlation analysis showed that the number of released fragments cannot be predicted on the basis of the number of spores. Enzyme-linked immunosorbent assays with monoclonal antibodies produced against Aspergillus and Penicillium fungal species showed that fragments and spores share common antigens, which not only confirmed the fungal origin of the fragments but also established their potential biological relevance. The considerable immunological reactivity, the high number, and the small particle size of the fungal fragments may contribute to human health effects that have been detected in buildings with mold problems but had no scientific explanation until now. This study suggests that future fungal spore investigations in buildings with mold problems should include the quantitation of fungal fragments.

Epoxy composites modified with ground walnut shell used as organic waste fillers were prepared and examined. Post-agricultural waste materials after grinding were characterized by evaluation of grain size distribution and structure observations realized using scanning electron microscope (SEM). The influence of filler addition on the mechanical properties of epoxy-based composites was determined by: static tensile test, Charpy impact test, and ball indentation hardness measurements. Composite samples containing 20, 30, 40, and 50 wt% of walnut shell were characterized by increased stiffness and hardness in comparison to the unmodified resins. Moreover, the incorporation of the filler resulted in a decrease of composite material tensile strength and impact resistance. Thermo-mechanical properties of the composites were investigated by dynamic mechanical thermal analysis (DMTA). Results obtained from DMTA tests showed a growth in the composites’ stiffness at elevated temperatures as a function of the increasing natural filler content. The material characterization was supplemented by thermal stability evaluation realized by thermogravimetric analysis (TGA). It was found that the incorporation of ground walnut shell led to an improved thermal stability of composite materials. The analysis of the change in composite material properties, caused by natural filler incorporation, was complemented by material microstructure observations.