The upcoming 3GPP global mobile communication standard 6G strives to push the technological limits of radio frequency (RF) communication even further than its predecessors: Sum data rates beyond 100 Gbit/s, RF bandwidths above 1 GHz per link, and sub-millisecond latency necessitate very high performance development tools. We propose a new SDR firmware and software architecture designed explicitly to meet these challenging requirements. It relies on Ethernet and commercial off-the-shelf network and server components to maximize flexibility and to reduce costs. We analyze state-of-the-art solutions (USRP X440 and other RFSoC-based systems), derive architectural design goals, explain resulting design decision in detail, and exemplify our architecture’s implementation on the XCZU48DR RFSoC. Finally, we validate its performance via measurements and outline how the architecture surpasses the state of the art with respect to sustained RF recording, while maintaining high Ethernet bandwidth efficiency. Building a 6G integrated sensing and communication (ISAC) example, we demonstrate its real-time and rapid application development capabilities.
6 February 2026 in IEEE Transactions on Antennas and Propagation
The upcoming 6G mobile communication standard will offer a revolutionary new feature: Integrated sensing and communication (ISAC) reuses mobile communication signals to realize multi-static radar for various applications including localization. Consequently, applied ISAC propagation research necessitates to evolve from classical monostatic radar cross section (RCS) measurement of static targets on to bistatic radar reflectivity characterization of dynamic objects. Here, we introduce our Bistatic Radar (BIRA) measurement facility for independent spherical positioning of two probes with sub-millimeter accuracy on a diameter of up to 7m and with almost continuous frequency coverage from 0.7 up to 260 GHz. Currently, BIRA is the only bistatic measurement facility capable of unrestricted ISAC research: In addition to vector network analysis, it employs advanced wideband transceiver technology with an instantaneous bandwidth of up to 4 GHz. These transceivers grant BIRA the unique capability to characterize dynamic targets in both Doppler and range, while also significantly accelerating measurements on static objects. Additionally, the installation is capable of spherical near-field antenna measurements over these wide frequency ranges.
22 March 2015 in International Journal of Antennas and Propagation
A precise characterization of the Land Mobile Satellite (LMS) channel, that is, the channel between a satellite and a mobile terminal, is of crucial importance while designing a satellite-based communication system. State-of-the-art statistical LMS channel models offer the advantage of requiring only a few input parameters, which include the environment type and the elevation angle of the satellite. However, the azimuth angle relative to the driving direction of the mobile terminal is usually ignored, as its proper modeling requires either an extensive measurement campaign or a significant effort from the user, as a precise geometrical description of the scenario is required. In this contribution we show that the impact of the driving direction on the channel statistics is not negligible and requires to be modeled explicitly. Moreover, we propose a statistical LMS channel model whose parameters are obtained via an image-based state estimation method. The image-based method is verified by a comparison with measured radio frequency signal levels. The proposed method allows obtaining a complete statistical description of the channel for arbitrary elevation and azimuth angles.
Current and upcoming communication and sensing technologies require ever larger bandwidths. Channel bonding can be utilized to extend a receiver's instantaneous bandwidth beyond a single converter's Nyquist limit. Two potential joint front-end and converter design approaches are theoretically introduced, realized and evaluated in this paper. The Xilinx RFSoC platform with its 5 GSa/s analog to digital converters (ADCs) is used to implement both a hybrid coupler based in-phase/quadrature (I/Q) sampling and a time-interleaved sampling approach along with channel bonding. Both realizations are demonstrated to be able to reconstruct instantaneous bandwidths of 5 GHz with up to 49 dB image rejection ratio (IRR) typically within 4 to 8 dB the front-ends' theoretical limits.
Fundamental research on bistatic radar reflectivity is highly relevant, e.g., to the upcoming mobile communication standard 6G, which includes integrated sensing and communication (ISAC). We introduce a model for correcting instrumentation drift during bistatic radar measurements in anechoic chambers. Usually, background subtraction is applied with the goal to yield the target reflection signal as best as possible while coherently subtracting all signals which were present in both the foreground and background measurement. However, even slight incoherences between the foreground and background measurement process deteriorate the result. We analyze these effects in real measurements in the frequency range 2-18 GHz, taken with the Bistatic Radar (BIRA) measurement facility at TU Ilmenau. Applying our proposed drift correction model, we demonstrate up to 40 dB improvement for the removal of direct line-of-sight antenna crosstalk over the state of the art.