9 February 2018 in IEEE Transactions on Instrumentation and Measurement
This paper addresses simultaneous high-precision measurement and analysis of generic reference signals by using inexpensive commercial off-the-shelf software-defined radio hardware. Sine reference signals are digitally downconverted to baseband for the analysis of phase deviations. Hereby, we compare the precision of the fixed-point hardware digital signal processing chain with a custom single instruction multiple data x86 floating-point implementation. Pulse reference signals are analyzed by a software trigger that precisely locates the time where the slope passes a certain threshold. The measurement system is implemented and verified using the Universal Software Radio Peripheral (USRP) N210 by Ettus Research LLC. Applying standard 10 MHz and 1 PPS reference signals for testing, a measurement precision (standard deviation) of 0.36 and 16.6 ps is obtained, respectively. In connection with standard PC hardware, the system allows long-term acquisition and storage of measurement data over several weeks. A comparison is given to the dual-mixer time difference and time interval counter, which are state-of-the-art measurement methods for sine and pulse signal analysis, respectively. Furthermore, we show that our proposed USRP-based approach outperforms measurements with a high-grade digital sampling oscilloscope.
22 August 2024 in IEEE Access
The upcoming 3GPP global mobile communication standard 6G strives to push the technological limits of radio frequency (RF) communication even further than its predecessors: Sum data rates beyond 100 Gbit/s, RF bandwidths above 1 GHz per link, and sub-millisecond latency necessitate very high performance development tools. We propose a new SDR firmware and software architecture designed explicitly to meet these challenging requirements. It relies on Ethernet and commercial off-the-shelf network and server components to maximize flexibility and to reduce costs. We analyze state-of-the-art solutions (USRP X440 and other RFSoC-based systems), derive architectural design goals, explain resulting design decision in detail, and exemplify our architecture’s implementation on the XCZU48DR RFSoC. Finally, we validate its performance via measurements and outline how the architecture surpasses the state of the art with respect to sustained RF recording, while maintaining high Ethernet bandwidth efficiency. Building a 6G integrated sensing and communication (ISAC) example, we demonstrate its real-time and rapid application development capabilities.
1 July 2020 in International Journal of Microwave and Wireless Technologies
In this paper, an orthogonal frequency-division multiplexing (OFDM) waveform radar sensing approach is demonstrated based on field measurements at C-band. We demonstrate a concept that is based on the exploitation of typical wireless communication transmissions to perform passive, distributed radar sensing. Our concept is based on an OFDM radar that operates in the modulation symbol domain and can be well integrated into existing OFDM receivers. The measurement setup and the signal processing steps for the OFDM radar are described. The results show that the passive, distributed radar sensing approach can be used to detect and localize moving cars and even pedestrians in automotive intersection scenarios.
1 September 2025 in IEEE Journal of Selected Topics in Electromagnetics, Antennas and Propagation
Integrated Sensing and Communication (ISAC) will be one key feature of future 6G networks, enabling simultaneous communication and radar sensing. The radar sensing geometry of ISAC will be multistatic since that corresponds to the common distributed structure of a mobile communication network. Within this framework, micro-Doppler analysis plays a vital role in classifying targets based on their micromotions, such as rotating propellers, vibration, or moving limbs. However, research on bistatic micro-Doppler effects, particularly in ISAC systems utilizing OFDM waveforms, remains limited. Existing methods, including electromagnetic simulations, often lack scalability for generating the large datasets required to train machine learning algorithms. To address this gap, this work introduces an OFDM-based bistatic micro-Doppler model for multi-propeller drones. The proposed model adapts the classic thin-wire model to include bistatic sensing configuration with an OFDM-like signal. Then, it extends further by incorporating multiple propellers and integrating the reflectivity of the drone’s static parts. Measurements were performed to collect ground truth data for verification of the proposed model. Validation results show that the model generates micro-Doppler signatures closely resembling those obtained from measurements, demonstrating its potential as a tool for data generation. In addition, it offers a comprehensive approach to analyzing bistatic micro-Doppler effects.
6 February 2026 in IEEE Transactions on Antennas and Propagation
The upcoming 6G mobile communication standard will offer a revolutionary new feature: Integrated sensing and communication (ISAC) reuses mobile communication signals to realize multi-static radar for various applications including localization. Consequently, applied ISAC propagation research necessitates to evolve from classical monostatic radar cross section (RCS) measurement of static targets on to bistatic radar reflectivity characterization of dynamic objects. Here, we introduce our Bistatic Radar (BIRA) measurement facility for independent spherical positioning of two probes with sub-millimeter accuracy on a diameter of up to 7m and with almost continuous frequency coverage from 0.7 up to 260 GHz. Currently, BIRA is the only bistatic measurement facility capable of unrestricted ISAC research: In addition to vector network analysis, it employs advanced wideband transceiver technology with an instantaneous bandwidth of up to 4 GHz. These transceivers grant BIRA the unique capability to characterize dynamic targets in both Doppler and range, while also significantly accelerating measurements on static objects. Additionally, the installation is capable of spherical near-field antenna measurements over these wide frequency ranges.
8 January 2020 in IEEE Journal of Radio Frequency Identification
In this paper, we present cost-effective techniques to assess UHF RFID performance for real world applications. This includes a positioner, based on stepper motors and braided fishing lines, which can position a tag in 3-D space. In combination with inventory meta data like RSSI and phase, we previously showed its use for a variety of measurements, e.g., the influence of tag-distance to materials and other tags. In this work, we extend its range of applications by the investigation of polarization sensitive ground reflections and as reference for tag localization estimations. For the measurements themselves, we use a commercial off-the-shelf R420 Impinj reader, which we control via LLRP commands, implemented in Python. Using a low-cost RTL-SDR, we observed the communication between reader and tag and found out that the tag is responding for lower powers than the reader was able to detect it.