Mykhail Михайлович Yamshinskij

Dr. Mykhail Михайлович Yamshinskij

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2017 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
SHStanislav Hryhoriev
Stanislav Hryhoriev
APArtem Petryshchev
Artem Petryshchev
GSGanna Shyshkanova
Ganna Shyshkanova
YYYurii Yakimtsov
Yurii Yakimtsov
SZSergiy Zhuravel
Sergiy Zhuravel
YGYevgen Goliev
Yevgen Goliev
It was determined that the original oxide chromium-containing ore raw material is represented by granules of rounded shape the size of 250–600 µm. Along with Cr and Fe, it revealed Mg, Al, Si, Ca, and Ti. They probably were included in the composition of oxide ore impurities and can exert an indirect influence on the reducing processes. Phase composition of the briquetted raw material after the carbon thermal treatment consisted mainly of Cr2O3 and metal Cr with the presence of carbides Cr7C3 and Cr2C3. Diffraction maxima of metal Fe and its compounds had no explicit manifestation, indicating the presence of Fe as substitution atoms in the chromium-containing phases and compounds. The structure is heterogeneous.The content of residual oxygen confirms the presence, along with metal Cr, under-reduced oxide or oxy-carbide compounds. The residual oxygen could also be contained in the composition of oxide related ore impurities. This is confirmed by detection of the specified elements in the examined areas in the images of the microstructure. Excessive carbon content ensures the post-reduction of residual oxide component in a liquid metal in the process of alloying and enables protection against secondary oxidation of chromium

1 June 2023 in Casting Processes
Verified
Journal Article
Closed access
NINational Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»
National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»
Dmytro Vyktorovych IvanchenkoDmytro Vyktorovych Ivanchenko
Dmytro Vyktorovych Ivanchenko
MYMykhail Михайлович Yamshinskij
Mykhail Михайлович Yamshinskij
The paper considers the important features of the technology of strengthening AK7ch aluminum alloy with zirconium introduced with its tetrafluoride. The choice of a complex flux containing zirconium tetrafluoride in its composition is justified. It is indicated that in order to recover zirconium from its tetrafluoride in the aluminum melt, it is first of all necessary to ensure the formation of sodium or potassium fluorozirconate in the strengthening mixture. The mechanism of recovery of zirconium from tetrafluoride is presented. Technological recommendations for obtaining AK7ch alloy are given. It has been established that the complex flux intended to the alloy, which is modified, must be injected into liquid aluminum before the introduction of other alloying elements, namely silicon and magnesium. The maximum appropriate temperature for injecting zirconium into the aluminum melt from the complex flux is indicated. The maximum amount of zirconium that was recovered is 0.4%. The microstructure and mechanical properties of an alloy strengthened by zirconium from its tetrafluoride, which was injected into the alloy in the amount from 0.8 to 1.2%, were studied. As a result of the modification of aluminum alloy AK7ch with zirconium, the grains of silicon solution in aluminum (α-phase) are grind. No other structural changes are observed. The value of tensile strength and relative elongation of the alloy increases by 1.3 and 1.7 times, respectively.

1 January 2023 in Casting Processes
Verified
Journal Article
Open access
AUA. Ustymenko
A. Ustymenko
ILI. Lukianenko
I. Lukianenko
MYMykhail Михайлович Yamshinskij
Mykhail Михайлович Yamshinskij
IGI. Guria
I. Guria
BKB. Kyvhylo
B. Kyvhylo
УДК 621.745.55 Glass production refers to the branch of industry that produces construction and technical, container, chemical and laboratory and other types of glass. A significant specific weight in the turnover of goods is occupied by glass containers. The glass container market will remain promising and further growth in its consumption will be observed. To date, unfortunately, there is no universal scheme capable of significantly increasing the working life of glass mold parts. This situation creates new approaches and methods for solving the problems of improving the structure of the material of cast glass molds, reducing the cost of their production and increasing the service life of products. The most common chemical compositions of foreign and domestic heat-resistant cast irons for glass molds are analyzed today. Based on this, the greatest interest is cast iron alloyed with silicon with the subsequent formation of the necessary structure in the cast state using Fe-C-Si dosage of modified cast iron with microdosing of alloying elements. Cast irons were additionally microalloyed with Mo, Cr, Ti, Al and V. It was established that molybdenum and chromium contribute to the grinding of the primary grain. It was established that part of the carbon is spent on the formation of a solid solution doped with molybdenum and chromium, which causes the grinding of graphite inclusions. Microalloying with titanium and aluminum does not contribute to the grinding of graphite inclusions due to an increase in the ferrite component in the structure. As a result of the carbide-forming action of microalloying elements, a decrease in the number of graphite inclusions was established. According to the research results, it was established that the heat resistance of the alloy is a function of the entire complex of properties: mechanical, physical, physico-chemical and technological. In order to achieve high performance properties of mold sets, it is necessary to take into account all factors, including following the rules of design and development of heat-resistant casting manufacturing technology. References 1. Leushin I.O. (2013). Thermophysical parameters of operation of parts of cast-iron glassforms. Foundry, 1(13), 50-52 [in Russsian].2. Leushin I.O. (2013). Influence of structure formation and phase composition of cast iron castings of glass forms on the operational properties of finished products. Ferrous metallurgy, 5, 19-23 [in Russsian].3. Popov V.M. (1991). Thermal stability of cast irons with different forms of graphite. Foundry, 2, 34 [in Russsian].4. Leushin I.O., Alekseeva R. E. (2014). Improving the operational stability of parts of cast-iron glass molds by improving the technology of their manufacture and control. Proceedings of the Nizhny Novgorod State University. 1(103), 212-224 [in Russsian].5. Aleksandrov M.V. (2013). Development of chemical compositions and technologies for obtaining low-alloyed heat-resistant cast iron for glass-form parts: author. dis. on the science. steps of cand. tech. Sciences: spec. 05.16.04 "Foundry" [in Russsian].6. Leushin I. O., Bauman N. E. (2015). Influence of the structure of cast iron on the formation of operational defects in glass-forming equipment. Science and Education MSTU im. 11, 111–123 [in Russsian].7 Loper C. R. Jr. (2008). Structure of Spheroidal Graphite in Cast Iron. American Foundry Society, 08-066 (05), P. 1–10.8. Todorov P. P. (1974). Structure and properties of malleable cast iron. Moscow: Mechanical Engineering, 159 [in Russsian].9. Aleksandrov M. V. (2013). Improving the efficiency of modifying cast iron for castings of glass forms by intensifying the process of graphite formation. Foundry of Russia, 5, pp.19-21 [in Russsian].10. Aleksandrov M. V. (2012). Influence of the chemical composition and microstructure of cast iron castings on the heat resistance of glass mold parts. Foundry, 8, pp. 15-19 [in Russsian].11. Topoljanskij P.A. (2009). Increased service life of mold sets in the conditions of glass container factories. Glass container, 3, 14-18 [in Russsian].12. Naydek V. L. (2011). On the Theories of Graphite Formation in Iron. Key Engineering Materials, Vol. 457, 48–51.13. Bobro Ju.G. (1976). Alloyed cast iron. Moscow: Metallurgy 288 c. [in Russsian]. УДК 621.745.55 Скляне виробництво відноситься до галузі промисловості, що виробляє будівельно-технічне, тарне, хімічно-лабораторне та інші види скла. Значну питому вагу в товарообігу займає скляна тара. Ринок склотари залишатиметься перспективним і буде спостерігатися подальше зростання обсягу його споживання. На сьогоднішній день не існує універсальної схеми, що здатна суттєво підвищити робочий ресурс деталей склоформ. Така ситуація створює нові підходи і методи для вирішення проблем із вдосконалення структури матеріалу литих склоформ, здешевлення їх виробництва та підвищення ресурсу експлуатації виробів. Проаналізовано найбільш поширені на сьогоднішній день хімічні склади закордонних та вітчизняних жаростійких чавунів для склоформ. На підставі цього найбільший інтерес представляє чавун, що легують кремнієм з подальшим формуванням необхідної структури в литому стані за допомогою дозування Fe-C-Si...

30 April 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
APAnatolii Poliakov
Anatolii Poliakov
ADAnatolii Dzyuba
Anatolii Dzyuba
VVVadym Volokh
Vadym Volokh
APArtem Petryshchev
Artem Petryshchev
BTBohdan Tsymbal
Bohdan Tsymbal
VRVictor Rebenko
Victor Rebenko
This paper reports a study into the structural-phase composition of the doping alloy made by processing metallurgical anthropogenic waste involving reduction smelting. This is required for determining the technological parameters that ensure an increase in the level of extraction of target elements during the processing of anthropogenic waste and for the further use of the doping alloy. It was revealed that the phase composition of the doping alloy manifested a solid solution of the doping elements and carbon in α-Fe. Cementite Fe3C and silicides Fe5Si3, FeSi, and FeSi2 were also identified. In this case, the doping elements were more likely to act as substitution atoms. It has been determined that the microstructure of the alloy consisted of several phases of different shapes and contents of the basic doping elements. Sites with an elevated iron level of up to 95.87 % by weight in the composition could be represented by the solid solution phase of the doping elements and carbon in α-Fe. The sites with a relatively high (% by weight) content of carbon (0.83‒2.17) and doping elements ‒ W, up to 39.41; Mo, up to 26.17; V, to 31.42; Cr, to 9.15 ‒ were apparently of a carbide nature. The sites with a silicon content of 0.43‒0.76 % by weight likely included silicide compounds. The alloy's characteristics make it possible to smelt steel grades without strict carbon restrictions, replacing some of the standard ferroalloys. Neither phases nor compounds with a relatively high propensity for sublimation were identified in the material produced. Therefore, there is no need to provide conditions to prevent evaporation and loss in the gas phase of the doping elements. That could increase the degree of extraction of the doping elements

1 August 2025 in Casting Processes
Verified
Journal Article
Open access
SPSerhii Petrychenko
Serhii Petrychenko
ONOleksandr Narizhnyi
Oleksandr Narizhnyi
MYMykhail Михайлович Yamshinskij
Mykhail Михайлович Yamshinskij
EBEvgen Byba
Evgen Byba
MAMinitskyi Anatolyii
Minitskyi Anatolyii
ІЛІ.в. Лук’яненко
І.в. Лук’яненко
This study examines the possibility of recycling aluminum scrap from military equipment destroyed due to warfare in Ukraine, which has led to significant environmental and economic challenges. The accumulation of damaged equipment in open areas poses a threat of environmental pollution due to metal corrosion, which causes the release of hazardous substances into the soil, water bodies, and atmosphere. However, despite these issues, such equipment also has significant untapped economic potential, as it can be recycled into secondary materials for the production of new modern products. The study revealed that the obtained aluminum alloy is close in its chemical composition to commercially available alloys such as 1925 and V95, which increases its feasibility for use in new cast products with adequate mechanical properties. The determined mechanical properties of the alloy, including its strength (up to 140 MPa) and elongation (2.42%), confirm the alloy’s potential for further use in industry, particularly in structures requiring high mechanical properties. Specifically, the obtained alloy can be applied for the manufacture of structural elements that require high specific strength and corrosion resistance, such as cast engine components, housing parts, and other structural elements. The proposed technology for recycling aluminum scrap ensures efficient use of secondary resources with minimal environmental impact, which is an important aspect of the sustainable development of the metallurgical industry. The study confirmed the possibility ofobtaining an aluminum alloy that is close in its chemical composition and mechanical properties to industrially used alloys such as 1925 and V95. Thus, the research results can serve as a basis for further improvement of aluminum recycling technologies and their implementation into practice. The use of secondary aluminum alloys in production will not only allow for reducing the environmental footprint of the metallurgical industry but also contribute to economic development, optimization of resource consumption, and reduction of dependence on primary raw materials. У роботі проаналізовано можливості раціонального використання алюмінієвого брухту, отриманого внаслідок руйнування військової техніки під час збройної агресії проти України. Цей вид відходів становить не лише значний екологічний виклик, але й відкриває перспективи для відновлення та розвитку ресурсоефективних технологій. Зокрема, накопичення залишків техніки на відкритих майданчиках створює реальну загрозу довкіллю через корозійне руйнування металів, яке супроводжується вивільненням токсичних компонентів у ґрунт, водні ресурси та атмосферне повітря. Такий процес несе загрозу порушення екологічної рівноваги регіонів, що постраждали від воєнних дій. У той же час цей брухт містить значний економічний потенціал, оскільки містить легкі та цінні конструкційні метали, зокрема алюміній, придатний для повторного використання шляхом переплаву та легування. Дослідження показали, що алюмінієвий сплав, отриманий шляхом перероблення такої техніки, за хімічним складом наближається до широко вживаних промислових марок, як-от 1925 та В95. Цей факт свідчить про його придатність до подальшого застосування у виробництві литих деталей із підвищеними експлуатаційними характеристиками. Механічні випробування отриманого сплаву засвідчили його задовільні характеристики: тимчасовий опір розриву до 140 МПа та відносне подовження до 2,42 %, що підтверджує доцільність його використання для виробництва конструктивних елементів, які працюють в умовах статичних та квазистатичних навантажень. Потенційними напрямами застосування такого сплаву є виготовлення корпусних деталей, литих елементів двигунів, а також інших виробів, що потребують поєднання високої питомої міцності та корозійної стійкості. Запропонована технологія вторинної переробки алюмінієвого брухту є екологічно орієнтованою та ресурсозберігаючою. Її впровадження дозволяє зменшити навантаження на довкілля шляхом утилізації проблемних військових відходів, одночасно зменшуючи залежність металургійної промисловості від первинної сировини. Це відповідає принципам циркулярної економіки та сталого розвитку, а також...

30 August 2022 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
RLR. V Liutyi
R. V Liutyi
MTM. V Tyshkovets
M. V Tyshkovets
MYMykhail Михайлович Yamshinskij
Mykhail Михайлович Yamshinskij
VSV. Y Selivorstov
V. Y Selivorstov
VIV. G Ivanov
V. G Ivanov
Purpose. Creation of binder based on orthophosphoric acid and aluminum sulfate, study on its structure and physicochemical patterns of formation, determination of the properties of structured mixtures for the needs of foundry. Methodology. In the work, X-ray qualitative and quantitative analysis was performed on the Rigaku Ultima IV unit, and differential thermal analysis was performed on the STA 449 C Jupiter synchronous thermal analyzer. Orthophosphoric acid, technical thermal, of 85% concentration, 18-hydrous sulfate of aluminum Al2(SO4)3 18H2O and quartz sand of brand 3K5O3025 were used. The strength of core mixtures was determined on the US-700 unit on standard cylindrical samples with a diameter and height of 50mm. The roughness of the cast surfaces was determined on a profilometer model 107622 with computer processing of the obtained data and construction of profilograms. To determine the propensity of the core mixtures to form caking, a hexagon sample was used according to the method by M.Fedorov. Breakability was determined on standard cylindrical samples with a diameter and height of 50 mm according to the original method described in the text of the article. Findings. For the first time, the mechanism of formation of aluminum phosphates with binding properties during the interaction of aluminum hydrate crystal sulfate Al2(SO4)3 18H2O with orthophosphoric acid in the temperature range of 100200 has been investigated. The formation is proved of an intermediate phase during heating aluminum hydroxide Al(OH)3, which, in contrast to its sulfate, according to the results of thermodynamic analysis is able to interact with acid. Formation of aluminum in the system of ortho- and metaphosphates, which features binding properties and ensures high strength of samples based on quartz filler, has been established. The thermal transformations of the obtained binder, which consists of a combination of aluminum phosphates with its residual sulfate, are studied. Stages of gradual disintegration of crystal hydrates, formation of new aluminum phosphates and thermal decomposition of residual sulfate are recorded. The tendency to burn and knockout of the developed core mixtures was determined. Originality. For the first time, a description has been developed of the mechanism of formation of aluminum phosphates with binding properties during the interaction of its sulfate crystal hydrate Al2(SO4)3 18H2O with orthophosphoric acid in the temperature range of 100200. Practical value. A new inorganic binder from orthophosphoric acid and 18-aqueous aluminum sulfate has been obtained for foundry production. The scheme of its preparation involves preliminary mixing and heating of the specified reagents with the resulting formation of a dry powder material which consists of phosphates and residual aluminum sulfate, and therefore it is called phosphosulfate. The binding has a long shelf life and is introduced into the mixture in a ready-made form while the technology of its production is less energy-intensive and long-lasting compared to the preparation of traditional metal phosphate binding.