Ice–water interaction is a critical issue of engineering studies in polar regions. This paper proposes a methodology to simulate fluid–ice interactions by employing a structure modeled using ordinary state-based peridynamics (OSB-PD) within a smoothed particle hydrodynamics (SPH) framework, effectively representing a deformable moving boundary. The forces at the fluid–structure interface are delineated by solving the fluid motion equations for normal forces exerted by the fluid on the structure, grounded in the momentum conservation law. Upon validating the PD and SPH methods, a dam break flowing through an elastic gate was simulated. When compared with experimental results, the model exhibited discrepancies of 3.8%, 0.5%, and 4.6% in the maximum horizontal displacement, maximum vertical displacement, and the waterline deviation (W = 0.05 m), respectively. Moreover, the method demonstrated a high degree of accuracy in simulating the fracture of in-situ cantilever ice beams, with deflection closely matching experimental data and a 7.4% error in maximum loading force. The proposed PD-SPH coupling approach demonstrates its effectiveness in capturing the complex fluid–structure interactions and provides a valuable tool for studying the deformation and fracture of structures under the influence of fluid forces.
Motivated by the potential safety hazards posed by cracks in flow around bluff bodies in ocean engineering applications, this study investigates incompressible viscous flow around a sphere containing a central cylindrical bore at Re = 300. The effects of borehole diameter and attack angle on vortex shedding, flow separation, and drag coefficients are systematically explored. Results indicate that at low attack angles, increasing the borehole diameter markedly influences the primary shedding frequency of vortex, thereby modifying their structural characteristics. Moreover, total drag is observed to increase with larger borehole diameters. At elevated attack angles, the borehole diameter affects the initiation of flow separation due to its proximity to the separation point. The impact of attack angle is most significant for larger borehole diameters, where pronounced alterations in both vortex shedding and flow separation are evident. Additionally, the magnitude of the borehole diameter amplifies the influence of the angle of attack on the drag coefficient. Due to the jet-like flow induced by the bore, flow instability around the sphere is intensified when the borehole diameter is sufficiently small. This instability initially escalates with increasing angle of attack, peaking at 45 degrees, and then diminishes as the angle of attack continues to increase.