The objective of this paper was to establish a comprehensive methodology for the optimized design of propellers for ice-class vessels, aiming to enhance hydrodynamic efficiency while ensuring structural integrity. This paper begins by introducing a novel approach for calculating blade stress, which takes into account both extreme ice loads and hydrodynamic loads, to be utilized in the propeller strength design process. Subsequently, a backpropagation (BP) neural network model was developed based on the data obtained from B-series propeller charts and integrated with a genetic algorithm to achieve a preliminary optimized design of the propeller’s hydrodynamic performance. To illustrate the application of this methodology, a case study of an ice-breaking tug propeller design is presented, detailing the optimization design process, including the preliminary, intermediate, and final design stages. The study also addresses key aspects such as geometric parameterization, the selection of optimization variables, the implementation of optimization algorithms, and the balance of multi-objective trade-offs. The proposed design approach can serve as a valuable reference for the practical engineering design of propellers for ice-class vessels, providing a systematic framework for achieving optimal performance in challenging operating conditions.
Ice–water interaction is a critical issue of engineering studies in polar regions. This paper proposes a methodology to simulate fluid–ice interactions by employing a structure modeled using ordinary state-based peridynamics (OSB-PD) within a smoothed particle hydrodynamics (SPH) framework, effectively representing a deformable moving boundary. The forces at the fluid–structure interface are delineated by solving the fluid motion equations for normal forces exerted by the fluid on the structure, grounded in the momentum conservation law. Upon validating the PD and SPH methods, a dam break flowing through an elastic gate was simulated. When compared with experimental results, the model exhibited discrepancies of 3.8%, 0.5%, and 4.6% in the maximum horizontal displacement, maximum vertical displacement, and the waterline deviation (W = 0.05 m), respectively. Moreover, the method demonstrated a high degree of accuracy in simulating the fracture of in-situ cantilever ice beams, with deflection closely matching experimental data and a 7.4% error in maximum loading force. The proposed PD-SPH coupling approach demonstrates its effectiveness in capturing the complex fluid–structure interactions and provides a valuable tool for studying the deformation and fracture of structures under the influence of fluid forces.