Designing high voltage superjunction (SJ) power devices with wide bandgap and extreme bandgap semiconductors, when compared to silicon, can enhance the trade-off between RON,sp and BV significantly, due to their >10× higher avalanche breakdown electric field. Nevertheless, because of the difference in the breakdown field profile and ionization path length, the effective breakdown field for these semiconductor SJ devices has not been determined theoretically. Consequently, we estimate and compare the effective critical breakdown electric field for SJ device structures in Si, 4H–SiC, 2H–GaN, β-Ga2O3, diamond, and AlN using Technology Computer Aided Design TCAD simulation. We also establish its dependence on the SJ devices’ structural parameters, such as the pillar thickness. Furthermore, we also quantitatively compare the on-state performance of these SJ devices, including their thermal capabilities, using a paramount figure-of-merit to underscore the potential improvement possible.
By using 4H-SiC packaged Charge-Balanced (CB) MOSFET, we have experimentally demonstrated a 3.3kV 4H-SiC common-drain bidirectional (BD) CB power MOSFET and measured its static and dynamic characteristics compared to its unidirectional counterpart. We show that the BD CB MOSFET conducts and blocks at the first and third quadrants with the appropriate gate bias with an on-state resistance double its unidirectional counterpart, while its switching energies are 12 (19) and 34 (12) mJ/cm2for BD CB MOSFET (UD CB MOSFET).
This paper presents a unified analytical reformulation and extension of existing drift-region design methods for high-voltage unipolar semiconductor devices. It enables unified design and performance optimization across a wide range of semiconductor materials like silicon (Si), wide-bandgap, and ultra-wide-bandgap semiconductors. The model provides closed-form expressions for the key performance parameters such as breakdown voltage (BV), critical electric field (Ecr), and depletion width (WD) using only doping concentration (ND) and intrinsic material properties. By assuming effective impact ionization coefficients via a geometric mean, the impact ionization integral can be solved analytically and then fitted using dimensionless parameters, eliminating the need for material-specific fitting. It applies to both non-punch-through and punch-through (PT) structures and guides designers in identifying optimal doping-thickness combinations. Applied to PT devices, the theoretical limits of the model predict 10%–15% improvement in conduction performance for all semiconductors across the practical BV range.
We quantitively compare the static and dynamic performance for high-voltage SiC bidirectional (BD) conventional and superjunction (SJ) DMOSFETs by using 3D TCAD simulations. We extract the specific on-resistance (RON,sp) and the total specific switching charge (QT,sp), which is a sum of the specific gate charge (QG,sp) and drain charge (QDS,sp) to quantify both the static and switching characteristics respectively. We also develop a new Figure-of-Merit (FoM), which is the product of RON,sp . QT,sp, to evaluate the overall performance. We show that the high-voltage 4H-SiC BD SJ DMOSFET has the best FoM with substantial (>58%) improvement, compared to the BD conventional DMOSFETs, which increases with increasing breakdown voltage.
8 July 2026 in Journal of Vacuum Science & Technology A
This paper presents a comprehensive theoretical and experimental investigation into the breakdown voltage (BV) limits of vertical β-Ga2O3 Schottky barrier diodes (SBDs) on (001) substrates. First, MATLAB and TCAD simulations incorporating anisotropic impact ionization coefficients were utilized to establish theoretical critical electric fields for different crystallographic orientations. To mitigate orientation-dependent field crowding, SBDs utilizing single zone (SZ) and multiple floating zone (MFZ) junction termination extensions (JTEs) were fabricated with varying nitrogen doses, demonstrating significant BV improvements over standard P+ Terminated devices. A systematic postdeposition rapid thermal annealing study was subsequently conducted to address metal-semiconductor contact issues, revealing an optimal thermal window that maximized the experimental BV. However, despite these edge termination and thermal optimizations, the maximum achieved BV remained at ∼900 V, well below the ideal theoretical limit of ∼(2–2.5) kV. This deviation is primarily attributed to a low nitrogen dopant activation rate of approximately 10%. To overcome this fundamental fabrication limitation, a novel Ring-Assisted (RA) JTE structure is proposed and simulated. The RA-JTE demonstrates high field-smoothing efficacy even at low implantation doses, providing a robust architectural solution to capture the low nitrogen activation reality in next-generation β-Ga2O3 power electronics.