Woongje Sung

Woongje Sung

Auto-generated profile, based on publicly available information

Woongje Sung

College of Nanotechnology Science and Engineering, University at Albany, Albany, NY, USA

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 October 2016 in IEEE Electron Device Letters
Verified
Journal Article
Open access
WSWoongje Sung
Woongje Sung
BBB. J. Baliga
B. J. Baliga
This letter reports a new 900 V 4H-SiC JBSFET containing an MOSFET with an integrated JBS diode in the center area of the chip. Both MOSFET and JBS diode structures utilize the same edge termination structure,which results in 30% reduction in SiC wafer area consumption in case of 10 A rating device. In order to form a Schottky contact for the JBS diode as well as ohmic contacts for n+ source and p+ body of the MOSFET, a simple metal process flow has been newly developed. It was found that Ni can simultaneously form ohmic contacts on n+ and p+ implanted regions while it remains a Schottky contact on the n-epitaxial drift layer when it is annealed at moderate temperature (900°C for 2 min). The proposed JBSFET was successfully fabricated using a nine-mask on 6-in 4H-SiC wafers.

31 October 2016 in IEEE Electron Device Letters
Verified
Journal Article
Open access
WSWoongje Sung
Woongje Sung
BBB. J. Baliga
B. J. Baliga
This letter presents a new edge termination technique named a hybrid junction termination extension (Hybrid-JTE), which combines ring-assisted JTE and multiple floating zone JTE. Based on the parameters of the drift layer specified by the wafer vendor, the measured breakdown voltage of the fabricated p-i-n diode using the Hybrid-JTE is as high as 5450 V, which is close (~99%) of the ideal parallel plane p-n junction. Furthermore, measured breakdown voltages from randomly chosen 32 p-i-n diodes across the wafer show very tight distribution: 29 diodes provide breakdown voltages higher than 5000 V at 100 μA.

10 August 2017 in IEEE Electron Device Letters
Verified
Journal Article
Open access
KHKijeong Han
Kijeong Han
BBB. J. Baliga
B. J. Baliga
WSWoongje Sung
Woongje Sung
The 1.2-kV-rated 4H-SiC Split Gate MOSFET (SG-MOSFET) structure is demonstrated to have a superior high-frequency figures-of-merit (HF-FOMs) by numerical simulations, with experimental validation for the first time. Excellent electrical characteristics (specific on-resistance, threshold voltage, breakdown voltage, reverse transfer capacitance,and gate-todrain charge) were measured from devices fabricated on a 6-in SiC wafer. Compared with the conventional MOSFET, the SG-MOSFET has 2.4× smaller HF-FOM [R on ×Q gd ] due to the reduced gate-to-drain charge.

23 February 2017 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
WSWoongje Sung
Woongje Sung
BBB. Jayant Baliga
B. Jayant Baliga
This paper compares five edge termination techniques for SiC high-voltage devices: single zone junction termination extension (JTE), ring assisted-JTE (RA-JTE), multiple floating zone-JTE, hybrid-JTE, and floating field rings. PiN diodes with these edge terminations were fabricated on a 4.5kV-rated 4H-silicon carbide (4H-SiC) epi-layer. It was experimentally demonstrated that the Hybrid-JTE provides a nearly ideal breakdown voltage (~ 99% of the ideal parallel plane breakdown voltage) with a stable avalanche blocking behavior. RA-JTE, with tight control of the JTE implant dose, is demonstrated to be the most area-efficient edge termination structure for SiC power devices.

21 December 2017 in IEEE Electron Device Letters
Verified
Journal Article
Open access
KHKijeong Han
Kijeong Han
BBB. J. Baliga
B. J. Baliga
WSWoongje Sung
Woongje Sung
A novel 1.2-kV-rated 4H-SiC buffered-gate MOSFET (BG-MOSFET) structure is proposed and experimentally demonstrated to have superior high frequency figures-of-merit (HF-FOMs) for the first time. From the measured data on devices fabricated in a 6-in foundry, the BG-MOSFET is demonstrated to have $4.0\times $ and $2.6\times $ smaller HF-FOM [ ${R}_{ {\scriptscriptstyle{\text {ON}}}}\times {Q}_{\text {gd}}$ ], and $3.6\times $ and $2.1\times $ smaller HF-FOM [ ${R}_{ {\scriptscriptstyle{\text {ON}}}}\times {C}_{\text {gd}}$ ], when compared with the conventional MOSFET and split-gate MOSFET, respectively.

26 October 2021 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
DKDongyoung Kim
Dongyoung Kim
WSWoongje Sung
Woongje Sung
The trade-off relationship between specific on-resistance and short-circuit withstand time in 1.2 kV 4H-SiC MOSFETs was drastically increased using a novel device structure. MOSFETs with deep P-well-formed using channeling implantation were firstly demonstrated to improve short-circuit ruggedness (~4 times longer than conventional MOSFET) with no negative impact on specific on-resistance. Proposed MOSFETs achieved short-circuit withstand time of $8~\mu \text{s}$ . Channeling implant with low energy was conducted to form deep P-well junctions. Fabrication of a deep P-well using channeling implantation is demonstrated using no additional nor complicated processes when compared to the conventional MOSFET fabrication process. A comparison between the conventional and novel designs was performed in terms of the output characteristics, blocking behaviors, and short-circuit ruggedness.