Unmanned aerial vehicle (UAV) swarm has emerged as a promising novel paradigm to achieve better coverage and higher capacity for future wireless network by exploiting the more favorable line-of-sight (LoS) propagation. To reap the potential gains of UAV swarm, the remote control signal sent by ground control unit (GCU) is essential, whereas the control signal quality are susceptible in practice due to the effect of the adjacent channel interference (ACI) and the external interference (EI) from radiation sources distributed across the region. To tackle these challenges, this paper considers priority-aware resource coordination in a multi-UAV communication system, where multiple UAVs are controlled by a GCU to perform certain tasks with a pre-defined trajectory. Specifically, we maximize the minimum signal-to-interference-plus-noise ratio (SINR) among all the UAVs by jointly optimizing channel assignment and power allocation strategy under stringent resource availability constraints. According to the intensity of ACI, we consider the corresponding problem in two scenarios, i.e., Null-ACI and ACI systems. By virtue of the particular problem structure in Null-ACI case, we first recast the formulation into an equivalent yet more tractable form and obtain the global optimal solution via Hungarian algorithm. For general ACI systems, we develop an efficient iterative algorithm for its solution based on the alternating optimization methods. Extensive simulation results demonstrate that the proposed algorithms can significantly enhance the minimum SINR among all the UAVs and adapt the allocation of communication resources to diverse mission priority.
In the background of strong interference noise, it is one of the crucial technologies of magnetic anomaly detection system to effectively detect and identify weak magnetic anomaly signals (MAS) gene- rated by targets. The detection and recognition of target signal under very low signal-to-noise ratio(SNR)below −10dB have not been achieved in the existing magnetic anomaly detection technology. To tackle these challenges, this paper proposes a magnetic anomaly recognition method based on fourth-order aperiodic stochastic resonance with the aid of sto- chastic resonance theory. The main nature of new algorithm is a four-layer fusion of single potential well stochastic resonance and has real-time recognition ability for MAS without prior information. When simulated magnetic anomaly signal of single object and mutil-targets were assumed in different condition, effect of parameters of algorithm was analyzed and range of optimal parameters was obtained. Through simulation and experimental verification of targets data, the new algorithm could realize target signal recognition in complex interference environment with SNR lower than −15dB,which demonstrates the efficacy of our proposed method and offer some useful design insights to practical MAD system.
6 February 2024 in IEEE Transactions on Intelligent Vehicles
Unmanned aerial vehicle (UAV) swarm-based localization technology has become increasingly popular due to its exceptional maneuverability, versatile coverage capabilities, and reliable line-of-sight (LoS) connectivity. However, the accuracy improvement by exploiting UAVs' placement poses a new challenge on multi-UAV localization system. This paper investigates the placement optimization problem for a multi-UAV localization network, where each UAV is equipped with a uniform circular array (UCA) to locate the target by adopting the angle-ofarrival (AOA) measurement. To measure the accuracy of the UCA-based localization system, we characterize the measurement error to be dependent on target-to-UAV distance and present a comprehensive derivation of the Cramer-Rao lower bound ´ (CRLB). Next, we formulate the problem as a non-convex semi-infinite optimization, aiming to minimize the worst-case squared position error bound (SPEB) by designing the robust placement strategy under some stringent geometric position constraints. We address this problem by alternatively solving two sub-problems, corresponding to a slave problem for calculating the worstcase SPEB of the uncertainty region under a fixed deployment of UAVs, as well as a master problem for optimizing UAVs' placement. By virtue of the particular problem structure, we develop the gradient projection-based method for the slave problem. Meanwhile, considering the lack of a closed expression for the maximum SPEB concerning UAVs' deployment in the master problem, we devise an iterative algorithm to acquire an efficient solution with the aid of Gibbs Sampling approach. Extensive simulation results demonstrate the efficacy of the proposed algorithms.
7 June 2024 in IEEE Transactions on Wireless Communications
Unmanned aerial vehicle (UAV) swarm-based sensing technology has become increasingly important due to its exceptional maneuverability, versatile coverage capabilities, and reliable line-of-sight (LoS) connectivity. However, the sensing accuracy improvement by exploiting resource coordination strategy poses a new challenge on multi-UAV sensing system. In this paper, we consider the problem of cooperative sensing via a system of multi-UAV, where each UAV is equipped with a directional antenna to cooperatively conduct energy detection for several targets of interest. To measure the perception ability of the system, we choose the energy detection probability as the metric, aiming to maximize the sum detection probability of the network by jointly optimizing UAVs’ deployment, as well as the directional antenna orientations. By virtue of the specific problem structure, we recast the formulation into an equivalent yet more tractable form with the aid of auxiliary vectors. Subsequently, we propose an efficient iterative algorithm for the solution based on the alternating direction penalty method (ADPM), which decomposes the formulated non-convex problem into multiple subproblems and solves them alternately. Extensive simulations validate the efficacy of the proposed algorithm and provide valuable insights for practical system design.
This article studies the potential of tightly coupling the Internet of Things (IoT) and smart grids for effective management of energy. A new approach is presented to minimize energy costs for IoT devices and edge servers, and reduce reliance on nonrenewable energy by diversifying power supply. Rechargeable batteries at end devices are considered for holistic energy management of the system. We jointly optimize the transmit powers and battery (dis)charging decisions of the devices, the receive beamformer of the edge servers, and the dynamic generation of different energy types. The alternating direction method of multipliers (ADMMs) is applied to support distributed optimization of (dis)charging decisions at individual devices. The Karush–Kuhn–Tucker (KKT) conditions are applied to deliver semi-closed-form power control of the devices. Simulations demonstrate significant improvement of the algorithm in renewable energy utilization and cost saving, compared to the existing techniques.
30 July 2025 in IEEE Open Journal of Vehicular Technology
In the face of dynamic electromagnetic environments, unmanned aerial vehicle (UAV) swarm-based sensing technologies have gained considerable attention due to their superior mobility, adaptable coverage, and reliable line-of-sight (LoS) connectivity. These advantages make UAVs well-suited for a wide range of sensing applications. However, optimizing UAV deployment to enhance sensing accuracy presents a considerable challenge for multi-UAV systems, particularly when dealing with complex target environments. This paper investigates a cooperative sensing problem within a multi-UAV framework, where multiple UAVs collaboratively perform energy detection for a set of ground targets (GTs). To evaluate the system's sensing accuracy, we use energy detection probability as the performance metric, with the objective of maximizing the network's overall detection probability through optimized UAV placement. Given the non-convex nature of the problem, we develop an efficient, low-complexity algorithm based on Gibbs Sampling (GS) to iteratively optimize UAV positions. Extensive simulation results validate the effectiveness of the proposed algorithm, demonstrating its robustness in various scenarios and providing practical insights for the design of real-world multi-UAV sensing systems.