13 January 2021 in IEEE Transactions on Communications
Over-the-air computation (AirComp) has been recognized as a promising technique in Internet-of-Things (IoT) networks for fast data aggregation from a large number of wireless devices. However, the computation accuracy of AirComp highly depends on the devices with the worst channels condition, which degrades severely when the number of devices becomes large. To address this issue, we exploit the massive multiple-input multiple-output (MIMO) with hybrid beamforming, in order to enhance the computational accuracy of AirComp in a cost-effective manner. In particular, we consider the scenario with a large number of multi-antenna devices simultaneously sending data to an access point (AP) equipped with massive antennas for functional computation over the air. Under this setup, we jointly optimize the transmit digital beamforming at the wireless devices and the receive hybrid beamforming at the AP, with the objective of minimizing the computational mean-squared error (MSE) subject to the individual transmit power constraints at the wireless devices. To solve the non-convex hybrid beamforming design optimization problem, we propose an alternating-optimization-based approach, in which the transmit digital beamforming and the receive analog and digital beamforming are optimized in an alternating manner. In particular, we propose two computationally efficient algorithms to handle the challenging receive analog beamforming problem, by exploiting the techniques of successive convex approximation (SCA) and coordinate descent (CD), respectively. It is shown that for the special case with a fully-digital receiver at the AP, the achieved MSE of the massive MIMO AirComp system is inversely proportional to the number of receive antennas. Furthermore, numerical results show that the proposed hybrid beamforming design substantially enhances the computation MSE performance as compared to other benchmark schemes, while the SCA-based algorithm performs closely to the performance upper bound achieved by the fully-digital beamforming.
27 December 2019 in IEEE Transactions on Vehicular Technology
Resource allocation algorithms are conceived for minimizing the energy consumption of multiuser mobile edge computing (MEC) systems operating in the face of interference channels, where mobile users can offload their latency-sensitive tasks to the mobile edge server via a base station (BS). Latency-sensitive applications often benefit from MEC services, which can be divided into two major classes: 1/ applications requiring uninterrupted execution, which cannot be fragmented and therefore require full offloading (FO); 2/ applications, which can benefit from fractional or partial offloading (PO). For each class of applications, we first formulate a joint optimization problem where the aim is to minimize the overall energy consumption across the sub-network subject to latency, transmission quality, computational budget and transmit power constraints. The proposed optimization problems are nonconvex and highly coupled, consequently they are challenging to solve. By exploiting binary relaxation, smooth approximation and introducing auxiliary variables, we convert these problems into more tractable forms and subsequently develop novel algorithms based on the concave-convex procedure (CCCP) to solve them. Furthermore, by incorporating a measure of user priority, a reduced-complexity solution is proposed for the FO scheme. Finally, the benefits of our energy-efficient resource allocation conceived for MEC are demonstrated through simulations.
12 August 2021 in IEEE Transactions on Vehicular Technology
Unmanned aerial vehicle (UAV) swarm has emerged as a promising novel paradigm to achieve better coverage and higher capacity for future wireless network by exploiting the more favorable line-of-sight (LoS) propagation. To reap the potential gains of UAV swarm, the remote control signal sent by ground control unit (GCU) is essential, whereas the control signal quality are susceptible in practice due to the effect of the adjacent channel interference (ACI) and the external interference (EI) from radiation sources distributed across the region. To tackle these challenges, this paper considers priority-aware resource coordination in a multi-UAV communication system, where multiple UAVs are controlled by a GCU to perform certain tasks with a pre-defined trajectory. Specifically, we maximize the minimum signal-to-interference-plus-noise ratio (SINR) among all the UAVs by jointly optimizing channel assignment and power allocation strategy under stringent resource availability constraints. According to the intensity of ACI, we consider the corresponding problem in two scenarios, i.e., Null-ACI and ACI systems. By virtue of the particular problem structure in Null-ACI case, we first recast the formulation into an equivalent yet more tractable form and obtain the global optimal solution via Hungarian algorithm. For general ACI systems, we develop an efficient iterative algorithm for its solution based on the alternating optimization methods. Extensive simulation results demonstrate that the proposed algorithms can significantly enhance the minimum SINR among all the UAVs and adapt the allocation of communication resources to diverse mission priority.
5 December 2019 in IEEE Internet of Things Journal
Relay-assisted computation offloading (RACO) is investigated, where user A wishes to share the results of computational tasks with another user B with the assistance of a mobile edge relay server (MERS). To enable this computation offloading, we propose a hybrid relaying (HR) approach employing a pair of orthogonal frequency bands, which are respectively used for the amplify-forward relaying of computational results and the decode-forward relaying of the unprocessed raw tasks. The motivation here is to adapt the allocation of computing and communication resources both to dynamic user requirements and to diverse computational tasks. Using this framework, we seek to minimize the weighted sum of the execution delays and the energy consumption in the RACO system by jointly optimizing the computation offloading ratio, the bandwidth allocation, the processor speeds, as well as the transmit power levels of both user A and the MERS, under some practical constraints. By adopting a series of transformations, we first recast this problem into a form amenable to optimization and then develop an efficient iterative algorithm for its solution based on the concave-convex procedure (CCCP). By virtue of the particular problem structure in our case, we propose furthermore a simplified algorithm based on the inexact block coordinate descent (IBCD) method, which leads us to much lower computational complexity. Finally, our numerical results demonstrate the advantages of the proposed algorithms over the state-of-the-art benchmark schemes.
8 January 2021 in IEEE Transactions on Information Forensics and Security
Covert communication prevents legitimate transmission from being detected by a warden while maintaining certain covert rate at the intended user. Prior works have considered the design of covert communication over conventional low-frequency bands, but few works so far have explored the higher-frequency millimeter-wave (mmWave) spectrum. The directional nature of mmWave communication makes it attractive for covert transmission. However, how to establish such directional link in a covert manner in the first place remains as a significant challenge. In this paper, we consider a covert mmWave communication system, where legitimate parties Alice and Bob adopt beam training approach for directional link establishment. Accounting for the training overhead, we develop a new design framework that jointly optimizes beam training duration, training power and data transmission power to maximize the effective throughput of Alice-Bob link while ensuring the covertness constraint at warden Willie is met. We further propose a dual-decomposition successive convex approximation algorithm to solve the problem efficiently. Numerical studies demonstrate interesting tradeoff among the key design parameters considered and also the necessity of joint design of beam training and data transmission for covert mmWave communication.
18 June 2020 in IEEE Internet of Things Journal
Symbiotic radio (SR) is emerging as a spectrum-and energy-efficient communication paradigm for future passive Internet-of-things (IoT), where some single-antenna backscatter devices, referred to as Tags, are parasitic in an active primary transmission. The primary transceiver is designed to assist both direct-link (DL) and backscatter-link (BL) communication. In multi-tags SR systems, the transceiver designs become much more complicated due to the presence of DL and inter-Tag interference, which further poses new challenges to the availability and reliability of DL and BL transmission. To overcome these challenges, we formulate the stochastic optimization of transceiver design as the general network utility maximization problem (GUMP). The resultant problem is a stochastic multiple-ratio fractional non-convex problem, and consequently challenging to solve. By leveraging some fractional programming techniques, we tailor a surrogate function with the specific structure and subsequently develop a batch stochastic parallel decomposition (BSPD) algorithm, which is shown to converge to stationary solutions of the GNUMP. Simulation results verify the effectiveness of the proposed algorithm by numerical examples in terms of the achieved system throughput.