In this work, a novel Fe3O4/graphene oxide (GO) hybrid was prepared and its removal ability of cationic methylene blue dye from water was investigated. To improve the dispersability of Fe3O4/GO hybrid in water, GO was first modified by polyethylene glycol (PEG) via a click approach before deposition of Fe3O4 nanoparticles onto its surface. The successful modification of GO surface and the deposition of Fe3O4 nanoparticles were confirmed by transmission electron microscopy directly. The saturation magnetization of the resultant Fe3O4/GO hybrid is 7.8 eum/g. The adsorption capacities of Fe3O4/GO hybrid for methylene blue at 35 and 60°C were as high as 96.05 and 120.05 mg/g, respectively. Moreover, the Langmuir, Freundlich, and Temkin models are used to investigate the isothermal adsorption behavior of Fe3O4/GO hybrid.
In this work, nanofibrous poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) membranes with different PMMA contents from 10 wt% to 20 wt% were prepared by electrospinning. The morphology of resultant membranes was investigated using scanning electron microscopy. It was found that the morphology of PVDF/PMMA electrospun nanofibers in the membrane was highly dependent on the solvent used during the electrospinning process. PVDF/PMMA nanofibers with beads were formed in the electrospun membrane when N,N-dimethylformamide (DMF) solvent was used due to its low evaporation rate. Uniform PVDF/PMMA nanofibers without beads in the electrospun membranes were obtained by DMF–acetone mixed solvent. The crystallization behavior of PVDF in the electrospun PVDF/PMMA membranes was investigated using differential scanning calorimetry and Fourier transform infrared spectroscopy. The β form crystalline structure was the major crystalline phase of PVDF in electrospun PVDF/PMMA membranes, and PMMA may suppress the formation of α crystalline phase of PVDF. The crystallinity degree of PVDF in the electrospun PVDF/PMMA membranes was lower than that of the electrospun PVDF membrane, and the annealing could effectively improve the crystallinity degree of PVDF in electrospun membranes. Moreover, it was found that the annealing has no adverse effect on the low density, high porosity, and water vapor permeability of electrospun membranes.
5 June 2023 in Environmental Science and Pollution Research
Novel P(VDF-TrFE)/organosilicate composite membrane was fabricated by electrospinning. The electrospun composite membrane containing as little as 2 wt% of organosilicate demonstrated significant improvements in strength, modulus, and toughness by about 103%, 45%, and 97%, respectively, when compared with those of electrospun pure P(VDF-TrFE) membrane, while maintaining high porosity and good breathability and piezoelectricity. We believe that such an organosilicate-reinforced durable, porous, and piezoelectric P(VDF-TrFE) membrane has huge advantages in various applications such as flexible sensors, wearable electronics, filter membrane, tissue engineering, battery separator, and polymer electrolyte.
Understanding the effect of a porous TiO2 nanolayer on the optical scattering and absorption through electrospun fibers is of great importance for the design and development of advanced optical extinction materials. Based on electrospinning and controllable self-assembly techniques, pure electrospun poly(vinylidene fluoride) (PVDF) fibers and TiO2-coated ones with different self-assembly cycles were prepared. The effect of TiO2 self-assembly cycles on surface parameters, e.g., thickness, assembled content, and porosity of the TiO2 nanolayer were determined by scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. With an increase in the self-assembly cycles, the TiO2-coated electrospun PVDF fibers presented rougher surfaces and greater average diameters. According to the characterized surface parameters, the effects of the controllable self-assembly on the optical refractive index, absorption index, and infrared extinction were investigated to increase the optical properties of electrospun PVDF fibers. The results indicated that an increase of almost 120–130 cm−1 in infrared extinction could be achieved through the controllable self-assembly with only 5.7 wt. % assembled TiO2 content. This is highly efficient when compared with other coating modes. We believe that this study could give some positive guidance in the design of TiO2-coated electrospun fibers for improving their surface and optical properties.