Renat Tyulyubayev

Mr. Renat Tyulyubayev

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 June 2026 in Metals
Verified
Journal Article
Open access
PDF file
AZAblay Zhunusov
Ablay Zhunusov
RTRenat Tyulyubayev
Renat Tyulyubayev
ABAltynsary Bakirov
Altynsary Bakirov
AZAygul Zhunusova
Aygul Zhunusova
AKAnar Kenzhebekova
Anar Kenzhebekova
OYOnuralp Yucel
Onuralp Yucel
This paper examines a resource-saving technology for ferrosilicon smelting using industrial waste, specifically aluminum slag and aspiration dust from ferroalloy production. A technological approach is proposed based on the preliminary pelletization of finely dispersed aluminum slag to improve the physicochemical properties of the charge materials and ensure their efficient use in the metallurgical process. Pellets were produced by granulation in a disk granulator using a lignosulfonate binder, followed by drying and high-temperature firing in the temperature range of 600–800 °C. Microstructural and energy-dispersive analysis revealed the formation of a stable aluminosilicate matrix, represented predominantly by mullite-like phases, ferrosilicate inclusions, and calcium–magnesium silicates. The formation of these phases contributes to the strengthening of the pellet structure and the formation of intergranular bonds during heat treatment. Experimental ferrosilicon smelting was conducted in a laboratory ore-thermal electric arc furnace. The results demonstrated a stable electrothermal smelting regime, satisfactory charge layer gas permeability, and effective reduction processes. The resulting alloy corresponds to FS-45 ferrosilicon grade with a silicon content of approximately 48%. It was established that aluminum slag-based pellets actively participate in the formation of an aluminosilicate slag system of the SiO2-Al2O3-CaO-MgO type, ensuring favorable slag physicochemical properties and efficient separation of the metallic and slag phases. The proposed approach enables the incorporation of industrial waste into metallurgical production, reducing the environmental impact, and increasing the resource efficiency of silicon ferroalloy production processes.

30 December 2025 in Science and Technology of Kazakhstan
Verified
Journal Article
Closed access
AZA. K. Zhunusova
A. K. Zhunusova
AKA. Ye. Kenzhebekova
A. Ye. Kenzhebekova
ABAltynsary Bakirov
Altynsary Bakirov
RTRenat Tyulyubayev
Renat Tyulyubayev
This article presents the studies of the physicochemical properties of granules obtained by granulation of aluminum slags. During the studies, the granules were subjected to hardening firing at high temperatures to understand the chemistry of the process. To study the physicochemical properties, samples of granules obtained from aluminum slags were prepared, which were subjected to microanalysis by scanning electron microscopy, X-ray phase analysis and derivatographic studies. The studies showed that the main phases in the granules are Al2MgO4, Al5,65Mg2,39O10Si1,45, MgO3Si, Al2,4O4,8Si0,6, Al2O3. The main part of the studied granules is represented by spinel, mullite, aluminum oxide, sapphirine. Moreover, spinels in the phase composition of sample №. 1 amounted to 25.4 %, sapphirine 26.0 %, aluminum oxides 25 % and mullite accounts for 11.7 5, the rest is MgO3Si (11.9 %). The theoretical temperature of the reduction of the main element of silicon by carbon is 1669 °C, and the complete destruction of mullite is achieved above 1500 °C. Therefore, granules obtained from aluminum slags are quite suitable for use as a batch in the production of ferrosilicon with aluminum. Keywords: Aluminum slag, granules, aluminum oxide, high-temperature firing, derivatogram.

31 March 2026 in Science and Technology of Kazakhstan
Verified
Journal Article
Closed access
AZAblay Zhunusov
Ablay Zhunusov
RTRenat Tyulyubayev
Renat Tyulyubayev
AZA. Zhunusova
A. Zhunusova
ABAltynsary Bakirov
Altynsary Bakirov
AKA. Kenzhebekova
A. Kenzhebekova
This paper examines the physicochemical and mineralogical properties of pellets produced from secondary aluminum slags with the addition of silica-enriched aspiration dust from ferroalloy production. To incorporate finely dispersed industrial waste into metallurgical processing, a pelletizing method was applied in a disk granulator using an aqueous lignosulfonate solution as a binder. The resulting pellets were subjected to high-temperature firing at temperatures of 600, 800, and 1000 °C. The phase and mineralogical composition were studied using X-ray diffraction and petrographic analysis, and the microstructure was analyzed using electron microscopy. It was found that increasing the firing temperature intensifies solid-phase interactions and forms calcium silicate and aluminosilicate phases, such as wollastonite, dicalcium silicate, and mullite. The introduction of aspiration dust with a high SiO₂ content helps reduce the sintering onset temperature and strengthen the pellet structure by forming a binding silicate matrix. It has been shown that optimizing the composition and firing temperature allows for the production of heat-resistant and mechanically strong pellets, promising for use in processes for producing ferrosilicon with increased aluminum content. Keywords: Aluminum slag, pellets, pelletizing, X-ray phase analysis, ferrosilicon.

30 June 2026 in Science and Technology of Kazakhstan
Verified
Journal Article
Closed access
AZAblay Zhunusov
Ablay Zhunusov
RTRenat Tyulyubayev
Renat Tyulyubayev
AZA. Zhunusova
A. Zhunusova
ABAltynsary Bakirov
Altynsary Bakirov
OYOnuralp Yucel
Onuralp Yucel
This paper presents the results of large-scale laboratory ferrosilicon smelting in an 80 kVA ore-thermal furnace using recycled man-made materials. The possibility of partially replacing steel chips with iron ore agglomerate obtained from ferrous sands of alumina production, as well as the use of aluminum slag-based pellets, is investigated. The influence of the chemical composition of the charge components on the physicochemical and electrical characteristics of the smelting process is determined. It is shown that increased SiO2 and Al2O3 contents in the pellets promote the formation of silicate melts, stabilization of the slag phase, and improved conditions for silicon reduction. The identified kinetic patterns allow for temperature optimization. The developed technology also contributes to a significant reduction in energy consumption. It is determined that the use of recycled resources reduces the content of harmful impurities in the alloy and reduces production costs. The obtained results confirm the technological efficiency and environmental feasibility of using complex man-made materials in ferrosilicon smelting. Keywords: Ferrosilicon, ore-thermal furnace, man-made waste, iron ore agglomerate, ferrous sands, electrical resistanceе.