Altynsary Bakirov

Dr. Altynsary Bakirov


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 October 2024 in Heliyon
Verified
Journal Article
Open access
ABAltynsary Bakirov
Altynsary Bakirov
AZAblay Zhunusov
Ablay Zhunusov
NONatalya Oleinikova
Natalya Oleinikova
Raigul RamazanovaRaigul Ramazanova
Raigul Ramazanova
The goal of this research is to select the optimal composition of the sintering charge of ash and slag waste for maximum extraction of alumina and obtaining self-disintegrating sinters of a given chemical composition. Experiments have shown that sintering of ash and slag waste using two-component charges makes it possible to extract alumina from sinters by no more than 60 %. The highest sintering rates were made using three-component charges. So, when sintering ash and slag waste from Almaty TPP-2 on a three-component charge of the composition CaO:SiO2 = 2; Na2O:(Al2O3+Fe2O3) = 1 at a duration of 60 min and a temperature of 1200 °C, alumina extraction was 83.68 %, under the same conditions, alumina extraction of 87.07 % was obtained during sintering of ash and slag waste from the Eurasian Energy Corporation, and alumina extraction was 90.2 % during sintering of ash and slag waste obtained after preliminary chemical activation.

11 November 2025 in Journal of Alloys and Metallurgical Systems
Verified
Journal Article
Open access
AZAblay Zhunusov
Ablay Zhunusov
AZAygul Zhunusova
Aygul Zhunusova
AKAnar Kenzhebekova
Anar Kenzhebekova
ABAltynsary Bakirov
Altynsary Bakirov
RTRenat Tyulyubayev
Renat Tyulyubayev

1 January 2016 in Кинетика и катализ
Verified
Journal Article
Closed access
ПБП. Н. Бревнов
П. Н. Бревнов
АЗА. С. Заболотнов
А. С. Заболотнов
ВКВ. Г. Крашенинников
В. Г. Крашенинников
BPBoris Pokidko
Boris Pokidko
ABAltynsary Bakirov
Altynsary Bakirov
ЛНЛ. А. Новокшонова
Л. А. Новокшонова
Бревнов П.Н., Заболотнов А.С., Крашенинников В.Г., Покидько Б.В., Бакиров А.В., Бабкина О.Н., Новокшонова Л.А.//Кинетика и катализ, 2016

30 June 2025 in Engineering Journal of Satbayev University
Verified
Journal Article
Open access
PDF file
AZAblay Zhunusov
Ablay Zhunusov
PBPetr Bykov
Petr Bykov
AZAblay Zhunusov
Ablay Zhunusov
OZOleg Vadimovich Zayakin
Oleg Vadimovich Zayakin
ABAltynsary Bakirov
Altynsary Bakirov
AKA. Kenzhebekova
A. Kenzhebekova
This paper presents the results of a study of the strengthening of iron ore raw materials obtained by oxidative roasting of granules and pellets using gaseous fuel and agglomeration with combustion of solid fuel in the agglomeration layer. Differences in the mechanisms of mineral formation of granules, pellets and agglomerates appear at the stage of liquid-phase strengthening and are due to the different role of iron in forming the strengthening melt. At the same time, in the agglomerate, granules and pellets, iron is in different valence states, affecting the processes' features. Iron can be in a trivalent state in the iron-silicate melt of granules and pellets and is not a silicate-forming component of the charge. The silicate compositions of the binders in the entire studied range of basicities (0.3-1.5) are located along the line of the CaO–SiO2 connection, which is determined using the phase diagram of the CaO–Fe2O3–SiO2 system. During agglomeration, the silicon-containing melt is formed under conditions of excess FeO, which directs the process of mineral formation during the creation of the iron-silicate binder of the agglomerate. Under standard agglomeration conditions, silicate binders with a basicity of 1.0-1.5 are formed in the olivine field of the CaO–FeO–SiO2 phase diagram, covering a wide range of compositions. The processes of mineral formation in batches, by hardened methods, both during the firing of granules, pellets, and during agglomeration, have shown that changing the oxidation potential of the gas phase is an effective lever on the path not only to improving the properties of ferrous sand - a waste product of alumina production, but also to creating both new binders and new types of iron ore raw materials suitable for smelting ferrosilicon.

9 June 2026 in Metals
Verified
Journal Article
Open access
PDF file
AZAblay Zhunusov
Ablay Zhunusov
RTRenat Tyulyubayev
Renat Tyulyubayev
ABAltynsary Bakirov
Altynsary Bakirov
AZAygul Zhunusova
Aygul Zhunusova
AKAnar Kenzhebekova
Anar Kenzhebekova
OYOnuralp Yucel
Onuralp Yucel
This paper examines a resource-saving technology for ferrosilicon smelting using industrial waste, specifically aluminum slag and aspiration dust from ferroalloy production. A technological approach is proposed based on the preliminary pelletization of finely dispersed aluminum slag to improve the physicochemical properties of the charge materials and ensure their efficient use in the metallurgical process. Pellets were produced by granulation in a disk granulator using a lignosulfonate binder, followed by drying and high-temperature firing in the temperature range of 600–800 °C. Microstructural and energy-dispersive analysis revealed the formation of a stable aluminosilicate matrix, represented predominantly by mullite-like phases, ferrosilicate inclusions, and calcium–magnesium silicates. The formation of these phases contributes to the strengthening of the pellet structure and the formation of intergranular bonds during heat treatment. Experimental ferrosilicon smelting was conducted in a laboratory ore-thermal electric arc furnace. The results demonstrated a stable electrothermal smelting regime, satisfactory charge layer gas permeability, and effective reduction processes. The resulting alloy corresponds to FS-45 ferrosilicon grade with a silicon content of approximately 48%. It was established that aluminum slag-based pellets actively participate in the formation of an aluminosilicate slag system of the SiO2-Al2O3-CaO-MgO type, ensuring favorable slag physicochemical properties and efficient separation of the metallic and slag phases. The proposed approach enables the incorporation of industrial waste into metallurgical production, reducing the environmental impact, and increasing the resource efficiency of silicon ferroalloy production processes.

30 December 2025 in Science and Technology of Kazakhstan
Verified
Journal Article
Closed access
AZA. K. Zhunusova
A. K. Zhunusova
AKA. Ye. Kenzhebekova
A. Ye. Kenzhebekova
ABAltynsary Bakirov
Altynsary Bakirov
RTRenat Tyulyubayev
Renat Tyulyubayev
This article presents the studies of the physicochemical properties of granules obtained by granulation of aluminum slags. During the studies, the granules were subjected to hardening firing at high temperatures to understand the chemistry of the process. To study the physicochemical properties, samples of granules obtained from aluminum slags were prepared, which were subjected to microanalysis by scanning electron microscopy, X-ray phase analysis and derivatographic studies. The studies showed that the main phases in the granules are Al2MgO4, Al5,65Mg2,39O10Si1,45, MgO3Si, Al2,4O4,8Si0,6, Al2O3. The main part of the studied granules is represented by spinel, mullite, aluminum oxide, sapphirine. Moreover, spinels in the phase composition of sample №. 1 amounted to 25.4 %, sapphirine 26.0 %, aluminum oxides 25 % and mullite accounts for 11.7 5, the rest is MgO3Si (11.9 %). The theoretical temperature of the reduction of the main element of silicon by carbon is 1669 °C, and the complete destruction of mullite is achieved above 1500 °C. Therefore, granules obtained from aluminum slags are quite suitable for use as a batch in the production of ferrosilicon with aluminum. Keywords: Aluminum slag, granules, aluminum oxide, high-temperature firing, derivatogram.