Yifeng Zhao

Dr. Yifeng Zhao

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 January 2020 in IEEE Access
Verified
Journal Article
Open access
YZYifeng Zhao
Yifeng Zhao
ZHZhuozhan Han
Zhuozhan Han
YXYue Xie
Yue Xie
XFXinghui Fan
Xinghui Fan
YNYangyang Nie
Yangyang Nie
WZWenwei Zhu
Wenwei Zhu
This paper reveals a correlation between morphology and thermal parameters on cross-linked polyethylene (XLPE) cable with different insulating states. Several cables were selected to detect the physicochemical and thermal parameters of the XLPE. The results show that the cable ampacity is determined by the thermal parameters, which are deeply subjected to the morphology of the XLPE. The molecular chain and crystal structure of the XLPE have a close connection with the thermal resistivity. The physicochemical parameters of carbonyl index (CI) and unsaturated band index (UBI) from Fourier transform infrared spectrum (FTIR) and melting range (Rm) from differential scanning calorimetry (DSC) can be the indicator to evaluate the diversity of the thermal resistivity. The change of thermal capacity is governed by the crystal distribution of the XLPE. The physicochemical parameters of crystallinity (χ) and lamellar thickness (L) from DSC can be the indicator to evaluate the change of the thermal capacity. In addition, FWHM of the crystallization peak ΔW, crystalline rate index (T0-TP) and cross-linking degree (G) can also be the indicator of the thermal parameters. Finally, this paper proposes a more accurate on-line monitoring method for electric power industry by detecting thermal parameters to diagnose the operating cables in the practical application.

3 March 2023 in High Voltage
Verified
Journal Article
Open access
YZYifeng Zhao
Yifeng Zhao
YXYue Xie
Yue Xie
YZYu Zhao
Yu Zhao
JHJiasheng Huang
Jiasheng Huang
XFXinghui Fan
Xinghui Fan
Gang LiuGang Liu
Gang Liu
Dynamic ageing process of cross‐linked polyethylene (XLPE) cable insulation under combined electro‐thermal effect is investigated by the construction of theoretical analysis model and the practice of operation‐simulated ageing test. Firstly, theoretical analysis model is constructed from time and spatial dimensions. From the time dimension, in the light of the impeding trend of internal stress to external stress, the XLPE ageing process of Steady state ‐Transition state ‐Steady state (STS) is proposed to illustrate the dynamic ageing process of XLPE. From the spatial dimension, the insulation is divided into three scales to quantify the ageing. Secondly, to practice the theoretical analysis model, an operation‐simulated ageing test was conducted on two high voltage alternating current cables with service years of 15 and 30 for 540 days. Subsequently, relevant diagnostic measurements were applied to analyse the influence of physicochemical characteristics on the dielectric and heat transfer performances of the cables. The results show that the degradation of the actual operating cable is an extremely slow process. On the one hand, the response in physical changes of morphology counterbalances the external stress, maintaining the stability. On the other hand, once the chemical changes occur, negative feedback mechanism tends to impede the occurrence of further degradation by regulating fields distribution.

3 August 2019 in Energies
Verified
Journal Article
Open access
PDF file
WZWenWei Zhu
WenWei Zhu
YZYifeng Zhao
Yifeng Zhao
ZHZhuoZhan Han
ZhuoZhan Han
XWXiangBing Wang
XiangBing Wang
YWYanFeng Wang
YanFeng Wang
NZNingXi Zhu
NingXi Zhu
This paper verifies the fluctuation on thermal parameters and ampacity of the high-voltage cross-linked polyethylene (XLPE) cables with different insulation conditions and describes the results of a thermal aging experiment on the XLPE insulation with different operating years in different laying modes guided by Comsol Multiphysics modeling software. The thermal parameters of the cables applied on the models are detected by thermal parameter detection control platform and differential scanning calorimetry (DSC) measurement to assure the effectivity of the simulation. Several diagnostic measurements including Fourier infrared spectroscopy (FTIR), DSC, X-ray diffraction (XRD), and breakdown field strength were conducted on the treated and untreated specimens in order to reveal the changes of properties and the relationship between the thermal effect and the cable ampacity. Moreover, a new estimation on cable ampacity from the perspective on XLPE insulation itself has been proposed in this paper, which is also a possible way to judge the insulation condition of the cable with specific aging degree in specific laying mode for a period of time.

1 January 2020 in IEEE Access
Verified
Journal Article
Open access
YXYue Xie
Yue Xie
YZYifeng Zhao
Yifeng Zhao
SBShuzhen Bao
Shuzhen Bao
PWPengyu Wang
Pengyu Wang
JHJiasheng Huang
Jiasheng Huang
LLLicheng Li
Licheng Li
Further research on retired cable rejuvenation via heat treatment was investigated in this paper. Three retired cables with service year of 7, 15 and 30 years were used and annealed at different temperatures following two different heat treatment methods. In the first test, two short cables with a length of 5 m were prepared and cut into five equal segments. Four segments of each cable were annealed at 90, 95, 100, and 105 ℃ to simulate the cable operation. Then, the cross-linked polyethylene (XLPE) from the cable insulation was peeled, and the peels from the inner, middle and outer positions were selected and subjected to the differential scanning calorimetry (DSC), DC conduction current, and dielectric breakdown strength measurements. The thermal and electrical performance of these samples were analyzed, and the optimum annealing temperature was determined. In the second test, three identical long cables were connected to a transformer, joints, and terminals to build two experimental circuits. The cables were annealed at the optimum temperature determined in the first test. The same measurements were performed on XLPE samples taken from the same positions as those in the first test. The results showed that the short cables exhibited the best thermal and electrical performance when annealed at 95 ℃. The three long cables annealed at 95 ℃ verified that the thermal and electrical properties of the cable insulation were significantly improved. The results of the two different annealing methods, which closely represent the actual cable operations, verified the feasibility that old cables without overheating history could be rejuvenated via heat treatment.

6 January 2020 in IEEE Access
Verified
Journal Article
Open access
YXYue Xie
Yue Xie
YZYifeng Zhao
Yifeng Zhao
SBShuzhen Bao
Shuzhen Bao
PWPengyu Wang
Pengyu Wang
JHJiasheng Huang
Jiasheng Huang
LLLicheng Li
Licheng Li
In this work, heat treatment was performed on three retired 110 kV AC cables with service years of 0, 15 and 30, and the effects on the thermal and electrical performance of the cable insulation were investigated. First, each cable with a length approximately of 5 m was prepared and cut into five equal segments. Four segments of each cable were annealed at a temperature of 90, 95, 100, or 105 °C by building a small circuit to simulate cable operation. Then, a section at the middle of each segment was cut out, and the insulation layer was peeled away. The peeled-off layers from the inner, middle and outer positions were selected as the test samples. Subsequently, Fourier transform infrared spectrometry (FTIR), and differential scanning calorimetry (DSC) were performed, and the DC conduction current and dielectric breakdown strength were measured. The best thermal properties of the highest melting point, crystallinity, and smallest melting range were found when the cables were annealed at 100, 105, and 105 °C for the inner, middle, and outer positions, respectively. The highest dielectric breakdown strength and lowest electrical conductivity were found at temperatures of 95 or 100 °C for the inner and middle positions, respectively, and at 105 °C for the outer position. The FTIR results showed that thermal annealing for hundreds of hours did not adversely affect the molecular chains. It is found that this type of heat treatment could be a feasible method to rejuvenate retired cables, and a conservative temperature of 95 °C is regarded as the optimum annealing temperature.

10 April 2023 in Energies
Verified
Journal Article
Open access
PDF file
ZXZhihui Xu
Zhihui Xu
MYMing Yang
Ming Yang
HPHuaqing Peng
Huaqing Peng
YZYifeng Zhao
Yifeng Zhao
Gang LiuGang Liu
Gang Liu
To explore the influence of electrothermal aging on the properties of HVAC XLPE cable during its normal operation, two circuits of 110 kV XLPE cable were subjected to a combined electrothermal accelerated aging test for 180 days. The test voltage was set at 95 kV, and the test temperature was set at 90 °C. The constant temperature aging mode was adopted for one circuit, and the periodic thermal cycle aging mode was adopted for the other circuit. The dielectric property of the cable was diagnosed with dielectric spectroscopy measurement, and the thermal property was diagnosed with thermal parameters (thermal capacity and thermal resistance) measurement. Combined with Fourier infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) measurements, morphological changes in the insulation under different electrothermal aging modes were analyzed to construct the correlation with the dielectric and thermal properties. The results show that the short-term electrothermal constant temperature aging mode effectively enhances the dielectric and thermal properties of the cable by modifying spherulite morphology and migrating polar compounds; the short-term electrothermal cycle aging mode also enhances the thermal properties of the cable due to the drop in small polar compounds. However, different distributions of polar compounds and crystal interfaces in the insulation lead to extreme distortion in the electric field distribution.