Hardware-in-the-Loop (HiL) driving simulators are valuable tools in assuring efficiency throughout the entire vehicle development and life cycle. Nonetheless, these techniques are accused to prejudice the simulator flexibility with respect to more conventional Model-in-the-Loop techniques. The vehicle network integration activity required to set off the HiL simulator, known as restbus simulation, is perceived as the main source of these perplexities. All vehicle signals to be emulated, defining the interface between real and simulated world, represents a pivotal point in simulator contexts and should be addressed methodically from the start, prior to every other decisional process, since they affect simulator architecture possibilities and limitations. The present article proposes a method to evaluate an integration task and synthetize key aspects of the vehicle communication network, supporting both high and low-level decisions in software, model and validation plans development. Thanks to the abstraction of the communication protocol formalism, integration activities can be conformed at a level of detail suitable for typical simulator engineers' educational backgrounds, reducing working effort, time and expertise required to update any driving simulator to specific HiL setups. The entire method is presented and discussed; electing an application case, the value of the approach is highlighted and the reasoning for its outputs is explained both practically and conceptually. Advantages and limitations of the proposed approaches are hence discussed emphasizing its effects on numerical model development, programming activities and operational workflow rationalisation.
Hardware-in-the-Loop (HiL) driving simulators are increasingly adopted in vehicle development to improve efficiency, flexibility, and repeatability across the product life cycle. Their implementation, however, remains challenging, as the integration of real vehicle components into simulation environments significantly increases system complexity and requires the coherent interaction of real hardware, actuation subsystems, and numerical models representing non-physical components. This paper addresses these challenges through the development of a remotely controlled HiL test rig for the braking system, focusing on its integration with a driver’s station in a driving simulator. The role of braking systems within HiL simulators is first discussed, highlighting their relevance for early development, debugging, and calibration activities. An exemplary development pipeline is then presented, introducing a modular and scalable software architecture implemented in MATLAB/Simulink to manage remote brake actuation and force feedback. The performance of the proposed actuation system is experimentally evaluated and discussed, including its integration with a commercial force-feedback device. The results demonstrate the feasibility and effectiveness of the proposed framework, showing concrete benefits in respect of development efficiency and industrial applicability.
Active vehicle systems integrate electromechanical actuators and advanced control strategies to improve driving comfort and safety. Their development requires coordinated mechanical, electrical, and software design, supported by early evaluation of system performance and driver acceptance. The automotive industry accelerates the development process by adopting multi-stage simulation workflows, from Model-in-the-Loop to hardware-in-the-loop and track testing, progressively reducing the virtualization level. Final testing stages require actuators with programmable control units, often unavailable in commercial products. This paper proposes a research-oriented steering actuator based on the modification of an existing system by introducing an additional torque sensor after the steering wheel. Results indicate that the additional compliance significantly alters the passive steering response, while the impact on active EPS operation is negligible, confirming the suitability of the modified actuator for experimental research applications.
Advanced Driver Assistance Systems (ADAS) are rapidly evolving to improve driving safety and comfort, in line with the European Community’s Vision Zero objectives. However, current validation methods mainly focus on steady-state conditions and regulatory compliance, while standardized KPIs capable of capturing vehicle dynamics during transient maneuvers and relating them to human driving behavior are still lacking. This study proposes a KPI-based methodology to evaluate lane centering systems in both steady-state and transient conditions, using a human driver as a reference. New parameters—aggressiveness and smoothness indices—are introduced to quantify the dynamic response. Simulator and constant-speed vehicle tests highlight the differences between ADAS strategies and human behavior, providing insights into comfort and acceptance.