This study explores the potential for PV solar power and battery storage to reduce energy costs in a typical Malian single-family household, highlighting significant cost savings and improved energy reliability. The high solar irradiance throughout the year makes solar power viable for household energy needs. However, most electricity is consumed at night due to air conditioning, with an annual consumption of 12,504 kWh. Cost models for solar power plants and battery energy storage systems, including installation, were developed. Cost parameters were reviewed using the latest literature, distinguishing between current and future cost trends, referred to as Case I and Case II, respectively. Additionally, a feed-in tariff of $0.00 and $0.04 per injected kWh of electricity into the AC mains was considered. The annual return in USD and the return on investment were considered as economic parameters. A small solar power plant with a peak power of up to 3 kW can achieve a high ROI between 70% and 100%. Due to reduced future cost prospects, this ROI could increase to 90% to 130%. However, such a plant can only reach a maximum self-sufficiency of about 40%, as most of the electricity is consumed during nights. A 4 kW power plant can achieve a self-sufficiency of about one-third for an ROI of 57% to 82%, costing approximately $1330 to $1760. When using battery energy storage, a self-sufficiency of 95% has been targeted. With battery storage, the maximum ROI varies from 22.5% to 32.0% with an investment cost of about $9590 to $13,139.
This paper presents a battery cell joining solution leveraging adhesively bonded lithium-ion cells as a foundation for scalable, serviceable, and recyclable energy storage platforms. The proposed design methodology enables mechanically and electrically functional connections and supports a design concept intended for compatibility with automated manufacturing and future robotic disassembly. A123 26650-format cells were tested using Epo-Tek 430 conductive adhesive, with performance evaluated through ESR and G-force measurement experiments. The results indicate that no measurable change in electrical performance was observed within the resolution of the measurement system, while supporting a design concept intended to improve modularity and serviceability. The proposed system shows potential for further investigation in electric vehicle and industrial energy system applications, although further validation under realistic operating conditions is required.