Steel sleeve grouting connections are widely used in prefabricated concrete structures. It is well known that insufficient grouting increases the chance of structural failure. As such, it is critical to monitor the density and compactness of grouting sleeve during the construction process, which however remains significant challenges as it is deeply buried in the beam and column. In this study, a lead zirconate titanate (PZT)-based sleeve grouting compactness detection method was systematically investigated. Five grouting sleeves samples with different degrees of compactness were prepared and four PZT transducers were surface-bonded on opposite sides of the outer wall of each sleeve. Two acts as actuators to generate stress wave signals, and the other two operate as sensors to receive the signals. The wavelet packet energy and Hilbert–Huang transform methods were applied to process the stress wave signals, and with the chosen characteristic parameters, the correction model of the grouting compactness was established. Experimental results show that the wavelet packet total energy values and the Hilbert energy peak values are related to the grouting compactness, indicating the feasibility of using PZT sensors to detect the compactness of grouting sleeves.
Mass concrete is prone to cracking induced by high early-age temperature rise and significant shrinkage stress, which severely compromises structural durability and safety. Aiming to achieve “low temperature rise and high crack resistance,” this study systematically optimized raw material selection and conducted experimental investigations on mix proportioning and the influence of critical parameters. The proposed design was subsequently validated through a field application. The results indicate that a fly ash content of 35% effectively improves workability, mitigates early-age shrinkage and reduces the heat of hydration. The incorporation of a high-performance expansive agent not only retards the hydration process and delays the temperature peak but also generates compensatory expansion at early ages, significantly reducing shrinkage during the cooling phase. Additionally, a polypropylene fiber dosage of 1.2 kg/m3 was found to optimally balance workability with crack resistance enhancement, resulting in less than 5% reduction in early-age strength. Field applications demonstrate that the concrete with the optimized mix proportion exhibits excellent workability and rapid early strength development. Specifically, the expansive agent delayed the temperature peak to 78 h and generated significant chemical expansion, effectively compensating for shrinkage caused by cooling. The findings provide critical insights into the construction-stage behavior of mass concrete, enabling improved safety control through better prediction and mitigation of early-age thermal and shrinkage effects. This study offers theoretical and technical support for the design of mass concrete characterized by low temperature rise and high crack resistance.