Airflow through the nasal cavity exhibits a wide variety of fluid dynamic behaviors due to the intricacy of the nasal geometry. The flow is naturally unsteady and perhaps turbulent, despite Computational Fluid Dynamics (CFD) in the literature being assumed as having a steady laminar flow. Time-dependent simulations can be used to generate detailed data with the potential to uncover new flow behavior, although they are more computationally intensive than steady-state simulations. Furthermore, verification of CFD results has relied on a reported pressure drop (e.g., nasal resistance) across the nasal airway although the geometries used are different. This study investigated the unsteady nature of inhalation at flow rates of 10 l/min, 15 l/min, 20 l/min, and 30 l/min. A scale resolving CFD simulation using a hybrid Reynolds-averaged Navier–Stokes--large eddy simulation model was used and compared with experimental measurements of the pressure distribution and the overall pressure drop in the nasal cavity. The experimental results indicated a large pressure drop across the nasal valve and across the nasopharynx, with the latter attributed to a narrow cross-sectional area. At a flowrate of 30 l/min, the CFD simulations showed that the anterior half of the nasal cavity displayed dominantly laminar but disturbed flow behavior in the form of velocity fluctuations. The posterior half of the nasal cavity displayed turbulent activity, characterized by erratic fluctuating velocities, which was enhanced by the wider cross-sectional areas in the coronal plane. At 15 l/min, the flow field was laminar dominant with very little disturbance, confirming a steady-state laminar flow assumption is viable at this flow rate.
This paper provides an explanation of the geometry, design, and operational principles for the three engines; having special emphasis in the Szorenyi rotary engine which has a deforming rhombus revolving inside a mathematically defined stator. A basic ideal mathematical simulation of those engines were performed, assuming the Otto cycle for the three engines. Also, it assumes the volumetric efficiency of 100%, a wide-open throttle (WOT), no knock nor any mechanical or thermal losses. This simulation focuses on how the fuel burns during combustion, creating pressure and thus, net work. A comparison in pressure traces and cycle performance is made. The study concludes analysing and comparing the ignition advance; finding the best advance for each engine thus the net work between the three engines during one working cycle. Finally, this paper analyses how the different volume change ratio for the combustion chamber of the Szorenyi, Wankel and the reciprocating engine have an effect in the pressure, net work and thermal efficiency generated inside the chamber during combustion for every working cycle.