Both geopolymer and plant fiber (PF) meet the requirements of sustainable development. Geopolymers have the advantages of simple preparation process, conservation and environmental protection, high early strength, wide source of raw materials, and low cost. They have broad application prospects and are considered as the most potential cementitious materials to replace cement. However, due to the ceramic-like shape and brittleness of geopolymers, their flexural strength and tensile strength are poor, and they are sensitive to microcracks. In order to solve the brittleness problem of geopolymers, the toughness of composites can be improved by adding fibers. Adding fibers to geopolymers can limit the growth of cracks and enhance the ductility, toughness and tensile strength of geopolymers. PF is a good natural polymer material, with the advantages of low density, high aspect ratio. It is not only cheap, easy to obtain, abundant sources, but also can be repeatedly processed and biodegradable. PF has high strength and low hardness, which can improve the toughness of composites. Nowadays, the research and engineering application of plant fiber-reinforced geopolymers (PFRGs) are more and more extensive. In this paper, the recent studies on mechanical properties of PFRGs were reviewed. The characteristics of plant fibers and the composition, structure and properties of geopolymers were reviewed. The compatibility of geopolymer material and plant fiber and the degradation of fiber in the substrate were analyzed. From the perspective of the effect of plant fibers on the compression, tensile and bending properties of geopolymer, the reinforcing mechanism of plant fibers on geopolymer was analyzed. Meanwhile, the effect of PF pretreatment on the mechanical properties of the PFRGs was analyzed. Through the comprehensive analysis of PFFRGs, the limitations and recommendations of PFFRG are put forward.

Geopolymer (GP) is environmentally friendly, has good mechanical properties and long-term workability, and has broad application prospects. However, due to the poor tensile strength and toughness of GPs, they are sensitive to microcracks, which limits their application in engineering. Fiber can be added to GPs to limit the growth of cracks and enhance the toughness of the GP. Plant fiber (PF) is cheap, easy to obtain, and abundant in source, which can be added to GP to improve the properties of composites. This paper reviews recent studies on the early properties of plant fiber-reinforced geopolymers (PFRGs). In this manuscript, the properties of PFs commonly used for GP reinforcements are summarized. The early properties of PFRGs were reviewed, including the rheological properties of fresh GPs, the early strength of PFRGs, and the early shrinkage and deformation properties of PFRGs. At the same time, the action mechanism and influencing factors of PFRGs are also introduced. Based on the comprehensive analysis of the early properties of PFRGs, the adverse effects of PFs on the early properties of GPs and the solutions were summarized.

References [25,38] had to be removed from the following sentences in the Introduction: “On the other hand, the higher frequency range is an interesting region for the study of promising materials for At present, the fibers used in composites mainly include metal fibers, inorganic fibers, synthetic fibers, natural fibers, etc