Manuel Enrico Enrico Rao

Mr. Manuel Enrico Enrico Rao

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2025 in Structural Health Monitoring
Verified
Journal Article
Open access
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
JSJonas Simon
Jonas Simon
Jochen MollJochen Moll
Jochen Moll
MSMark-Felix Schütz
Mark-Felix Schütz
Delivery drones have become increasingly important in recent years. It is advantageous for commercialization that suppliers are able to deliver orders autonomously and directly to their customers via air transport. However, the safety aspect must be considered. Real-time inspection of delivery drones during operation helps preventing accidents and a threat to civilians. For continuous monitoring, the sensors must be installed on the drone throughout the flight. A promising approach uses the inherent excitation of the servomotors for vibration-based Structural Health Monitoring (SHM). Vibrations can be recorded using triaxial acceleration sensors and analyzed using suitable methods such as stochastic subspace-based fault detection or histogram difference. In comparison to nondestructive testing, reference measurements of the intact structure are necessary in SHM. As soon as laboratory conditions no longer exist and environmental parameters, for example, wind, influence the vibration spectrum, classification methods are necessary for compensation. The recording of comprehensive reference datasets with different environmental conditions is limited by the battery life. This work focuses on diagnosing irreversible rotor blade damages of an 8.5 kg delivery drone. A parametric analysis taking into account systematic fusion of damage indicators and a specific number of considered references were determined for this purpose in order to assess the severity of the existing damage. Onboard SHM to evaluate the airworthiness in real time for linear and hovering flights was achieved.

26 May 2025 in Sensors
Verified
Journal Article
Open access
PDF file
ESErik Streser
Erik Streser
SASercan Alipek
Sercan Alipek
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
JSJonas Simon
Jonas Simon
Jochen MollJochen Moll
Jochen Moll
Viktor KrozerViktor Krozer
Viktor Krozer
This paper reports a convolutional neural network (CNN)-based damage detection approach for radar-based structural health monitoring of wind turbine blades. Subsequent radar measurements are transformed into an image-type representation for use as CNN input. In contrast to conventional approaches that require compensation for temperature and loading effects, the proposed framework inherently learns all required information during the training phase. Its damage detection performance (i.e., detecting intact vs. damaged condition) is demonstrated using measurements from multiple embedded radar sensors during fatigue testing of a wind turbine blade with a length of 31 m. The achieved F1-score for correct damage classification is between 91% and 100% for both the unloaded and the loaded blade.

9 June 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MMMoritz Mälzer
Moritz Mälzer
JSJonas Simon
Jonas Simon
CGCarsten Günner
Carsten Günner
Daniel Del-Río-VelillaDaniel Del-Río-Velilla
Daniel Del-Río-Velilla
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
Viktor KrozerViktor Krozer
Viktor Krozer
This paper introduces a novel structural health monitoring (SHM) approach based on guided electromagnetic waves propagating in a dielectric waveguide in the frequency range from 23.5 to 26 GHz. This approach enables the detection of structural damage based on the analysis of radar signals. This paper presents the performance of the methodology through an experimental case study considering an autonomous heavy lift drone where the whole SHM system is integrated onboard. The whole data acquisition pipeline is described, and damage detection results based on a damage indicator approach are presented and discussed. Finally, this work proves the ability of guided electromagnetic wave technology to be used in flying aerial vehicles. The methodology can be applied to other aircraft structures and application cases in the future.

2 June 2026 in Sensors
Verified
Journal Article
Open access
PDF file
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
Vittorio MemmoloVittorio Memmolo
Vittorio Memmolo
Jochen MollJochen Moll
Jochen Moll
Peter KraemerPeter Kraemer
Peter Kraemer
Radar technology in the microwave and millimeter-wave frequency range is the subject of current research for structural health monitoring of composite materials, e.g., damage detection in wind turbine blades. Performance assessment, enabling widespread practical application of this promising and non-contact sensing approach, can be realized via probability of detection (POD) theory, which is a statistical method for determining the detectability of damage through response metrics as a function of flaw size. This paper deals with the experimental investigation of a delamination model represented by two parallel glass fiber reinforced polymer plates separated from each other from 0mm to 1mm in steps of 0.01mm. Experimental studies with a frequency modulated continuous wave radar are performed under laboratory conditions in the frequency range from 57GHz to 65GHz. The signal response is represented by two damage indicators (DIs), according to the root mean square deviation and Mahalanobis distance. Since the reflection of electromagnetic waves exhibits a nonlinear behavior, this also implies a nonlinear response in the DI characteristic. The novelties in this work are the successful implementation of a nonlinear regression model, combined with an optimal threshold decision through receiver operating characteristic curves for a high-resolution POD representation. The POD with 95% confidence bounds indicates the flaw size at which the delamination can be detected reliably. Depending on the radar distance in experimental studies, the binary structural condition (damaged or undamaged) was correctly assessed from 95% to 100%. The minimum detectable size ranges from 0.01mm to 0.08mm.

1 August 2026 in e-Journal of Nondestructive Testing
Verified
Journal Article
Open access
PDF file
MMMoritz Mälzer
Moritz Mälzer
SBSebastian Beck
Sebastian Beck
THTobias Huemmer
Tobias Huemmer
TKThomas Kurin
Thomas Kurin
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
SMStefan Magnus
Stefan Magnus
The continuous increase in the number of wind turbines is one of the major innovations of the 21st century worldwide for generating renewable energy and simul taneously reducing greenhouse gases. Since maintenance by mechanics only takes place at intervals without continuous monitoring and is associated with high profit losses due to shutdowns, intelligent sensors and algorithms are used to monitor the entire structure, in particular wind turbine blades (WTBs). The field study by Maelzer et al. [1] and the fatigue test in the laboratory by Simon et al. [2] have shown that a radar-based approach in the millimeter-wave frequency range for structural health monitoring of WTBs is promising. This work describes the overall system design of a radar-based SHM system and its field deployment in a wind turbine. For this purpose, four sensor boxes are mounted on the main web of two rotor blades of a wind turbine. Each sensor box contains a frequency-modulated continuous wave (FMCW) radar at 60GHz and an acceleration sensor. Furthermore, one control unit per blade is mounted in the hub. Eachsensor box is connected to the corresponding control unit using the Power over Dataline standard for independent communication [3]. One of the three control units is connected to the mobile network for data transfer. A reference damage model developed by Rao et al. [4] and previously implemented on a WTB segment is applied here to simulate an artificial delamination. Initial measurement results are presented taking the changing environmental and operational conditions of the wind turbine into account. References [1] MORITZ MÄLZER, SEBASTIAN BECK, SERCAN ALIPEK, ELIAS REICHART, JOCHEN MOLL, VIKTOR KROZER, CHRISTOS OIKONOMOPOULOS, JÜRGEN KASSNER, MANFREDHÄGELEN,THOMASHEINECKE,etal. Radar-based struc tural monitoring of wind turbines blades: Field results from two operational wind tur bines. STRUCTURAL HEALTH MONITORING 2023, 2023. [2] Jonas Simon, Thomas Kurin, Jochen Moll, Oliver Bagemiel, Raphael Wedel, Stefan Krause, Fabian Lurz, Andreas Nuber, Vadim Issakov, and Viktor Krozer. Embedded radar networks for damage detection in wind turbine blades: Validation in a full-scale fatigue test. Structural Health Monitoring, 22(6):4252–4263, 2023. [3] Tobias Huemmer, Thomas Kurin, Moritz Maelzer, Katharina Fiedler, Sebastian Beck, Jochen Moll, and Fabian Lurz. System architecture of a radar-based structural health monitoring system for wind turbine blades using power over dataline. In IEEE Sensors 2025. IEEE, 2025. [4] Manuel E Rao, Jochen Moll, Peter Kraemer, and Viktor Krozer. Experimental application of a reversible reference damage model for radar-based shm of glass fiber reinforced polymer structures. In 2025 IEEE 12th International Workshop on Metrology for AeroSpace (MetroAeroSpace), pages 780–784. IEEE, 2025.