Sohan Kumar Y

Mr. Sohan Kumar Y


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 June 2026 in Sci
Verified
Journal Article
Open access
PDF file
SYSohan Kumar Y
Sohan Kumar Y
MSMadhav Sonkusare
Madhav Sonkusare
NPNiranjan N Prabhu
Niranjan N Prabhu
KPKRISHNA Kumar P
KRISHNA Kumar P
NSNagaraja Shetty
Nagaraja Shetty
Fibre-reinforced polymer composites incorporating synthetic reinforcements such as glass and carbon fibres are widely used due to their superior mechanical performance. However, their energy-intensive production and end-of-life disposal contribute to an increased carbon footprint and significant environmental burden. Natural fibre-reinforced composites have emerged as promising low impact alternatives, but variability in their mechanical performance and the lack of controlled comparative studies limit their structural application. This study presents a controlled experimental comparison of alkaline-treated unidirectional flax/epoxy and hemp/epoxy composites fabricated using the vacuum-assisted resin infusion moulding (VARIM) process. Alkali treatment was employed to enhance the fibre–matrix interfacial bonding. Mechanical characterization was conducted through tensile, flexural, impact, interlaminar shear strength (ILSS), and Vickers microhardness testing in accordance with relevant ASTM and ISO standards. The flax/epoxy composites exhibited superior in-plane mechanical performance including, 9.1% higher tensile modulus, 13.8% higher flexural strength and 20.5% higher flexural modulus compared to hemp/epoxy composites. A significant improvement was observed in impact performance, with hemp composites showing 87.4% higher impact strength, indicating enhanced resistance to dynamic loading. Conversely, hemp/epoxy composites demonstrated a 10.6% higher ILSS, suggesting improved interfacial shear resistance and fibre interlocking. These findings confirm that the fibre type significantly influences composite performance, with flax fibres providing superior stiffness and strength, while hemp fibres offer better interlaminar shear behaviour and impact strength. Scanning Electron Microscopy (SEM) fractographic analysis was additionally conducted on fracture surfaces to characterize failure mechanisms and fibre–matrix interfacial morphology. The present study provides a reliable comparative framework for material selection and demonstrates the potential of flax- and hemp-based composites as sustainable alternatives for lightweight structural applications. This study supports the development of sustainable composite materials and contributes to the United Nations Sustainable Development Goals (SDGs), particularly SDG 12 (Responsible Consumption and Production), SDG 13 (Climate Action), and SDG 11 (Sustainable Cities and Communities).

17 September 2026 in Sci
Verified
Journal Article
Open access
PDF file
MSMadhav Sonkusare
Madhav Sonkusare
SYSohan Kumar Y
Sohan Kumar Y
NPNiranjan N Prabhu
Niranjan N Prabhu
ASArun Kumar Shettigar
Arun Kumar Shettigar
NSNagaraja Shetty
Nagaraja Shetty
Synthetic fibre composites deliver high mechanical performance at a substantial energy and carbon cost, motivating a shift to renewable reinforcements. Flax and hemp are credible candidates, but their uptake is constrained by thermal stability and inherent combustibility, and their performance depends strongly on how completely the laminate is consolidated during manufacture. Vacuum-Assisted Resin Infusion Moulding (VARIM) yields low-void, well-consolidated laminates, yet the thermal and acoustic behaviour of VARIM-processed flax and hemp composites has not been compared directly. This study evaluates unidirectional flax/epoxy and hemp/epoxy laminates, each consisting of five plies produced under identical VARIM conditions, using TGA, DSC, limiting oxygen index (LOI) and UL 94 HB testing, SEM, and four-microphone impedance tube transmission loss (TL) measurements (ASTM E2611). Both laminates remained thermally stable to approximately 200–220 °C. Hemp/epoxy recorded a higher 5 wt.% degradation temperature (222 versus 207 °C), char residue (10.22 versus 9.29 wt.%) and average TL (13.22 versus 11.56 dB, 250–2000 Hz), while both laminates returned an identical LOI of 21.54% and a UL 94 HB rating. The fibre-governed properties therefore differed between the two laminates whereas the flammability response, governed by the shared epoxy matrix, did not. The glass transition temperature also differed (71.9 versus 65.3 °C) but is attributed to a small difference in degree of cure rather than to the reinforcement. The results provide baseline data for selecting VARIM-processed bio-composites for thermal management and passive noise control. The findings support Sustainable Development Goals (SDGs) 9, 12, and 13 through the development of sustainable, low-carbon bio-composite materials.