Organic solar cells (OSCs) are suitable candidates for next‐generation renewable energy sources due to their low cost of production and flexibility. Their power conversion efficiency has improved significantly to about 20% in both single‐ and multi‐junction devices due to the tremendous work in optimizing the synthesis of novel active‐layer materials while improving device fabrication. Despite a few reports predicting a 20‐year lifetime for OSC devices, their stability currently lags behind their commercialization. This Review discusses the issues that impair OSC stability and how to mitigate them. While emphasizing the importance of the International Summit on Organic Photovoltaic Stability (ISOS) protocols, an overview of recent advancements in OSC power conversion efficiency (PCE) and lifetime is provided. Finally, fundamental challenges to developing high‐performance and stable OSCs are discussed along with general recommendations for improving the stability of OSCs.
With the advent of novel polymers, organic solar cell (OSC) research has evolved significantly over the past decade. The molecular engineering of terpolymers has allowed for simple morphological control in binary devices over ternary blends, with the highest power conversion efficiencies (PCEs) exceeding 18%. However, research on the stability of OSCs is still lagging behind. In this regard, we examined the thermal stability of a series of terpolymers comprising one electron donor (thienyl-substituted benzodithiophene, BDTT) and two types of electron acceptors namely fluorobenzotriazole (FTAZ) and thienothiophene-capped diketopyrrolopyrrole (TTDPP) and their blends with PC71BM. The terpolymers demonstrated broad absorbance ranging from below 350 nm to 900 nm. The thermal stability of the terpolymers was investigated as pristine thin films and as bulk heterojunction (BHJ) films of the terpolymers blended with PC71BM by heating at 85 °C. We observed that thermal degradation had no sizeable effect on the properties of the pristine terpolymers while the blended films demonstrated significant changes in their morphology due to the inclusion and aggregation of PC71BM. After thermal annealing at 85 °C, the width of the symmetric CC stretching Raman mode and the CC/C–C intensity ratio of pristine terpolymers and terpolymer:PC71BM thin films revealed that incorporation of the FTAZ acceptor improves the thermal stability of the BHJ active layers. Furthermore, prolonged thermal annealing times (>3 hours) resulted in the development of PC71BM aggregates and terpolymer decomposition with no evident changes in the molecular and chemical structure of the terpolymers. Our findings indicate that by gradually annealing the blended films using an appropriate annealing time, the diffusion of PC71BM molecules to form aggregates can be carefully regulated, resulting in a nanostructure critical to the efficiency of organic solar cells.
Organic solar cells (OSCs) are suitable candidates for next-generation renewable energy sources due to their low cost of production and flexibility. Their power conversion efficiency has improved significantly to about 20% in both single- and multi-junction devices due to the tremendous work in optimising the synthesis of novel active-layer materials while improving device fabrication. Despite a few reports predicting a 20-year lifetime for OSC devices, their stability currently lags behind their commercialisation. This review discusses the issues that impair OSC stability and how to mitigate them. While emphasising the importance of the International Summit on Organic Photovoltaic Stability (ISOS) protocols, an overview of recent advancements in OSC power conversion efficiency (PCE) and lifetime is provided. A comprehensive list of experimental techniques for studying OSC degradation mechanisms is also extensively discussed, weighing the advantages and disadvantages of different methods. In addition, the review emphasises the importance of essential and cost-effective equipment to encourage impactful contributions especially from resource-limited laboratories, to foster a more inclusive and globally collaborative research landscape, ensuring that diverse scientific perspectives contribute to advancing the field. Finally, fundamental challenges to developing high-performance and stable OSCs are discussed along with general recommendations for improving the stability of OSCs.
With the advent of novel polymers, organic solar cell (OSC) research has evolved significantly over the past decade. The molecular engineering of terpolymers has allowed for simple morphological control in binary devices over ternary blends, with the highest power conversion efficiencies (PCEs) exceeding 18%. However, research on the stability of OSCs is still lagging behind. In this regard, we examined the thermal stability of a series of terpolymers comprising one electron donor (thienyl-substituted benzodithiophene, BDTT) and two types of electron acceptors namely fluorobenzotriazole (FTAZ) and thienothiophene-capped diketopyrrolopyrrole (TTDPP) and their blends with PC71BM. The terpolymers demonstrated broad absorbance ranging from below 350 nm to 900 nm. The thermal stability of the terpolymers was investigated as pristine thin films and as bulk heterojunction (BHJ) films of the terpolymers blended with PC71BM by heating at 85 ◦C. We observed that thermal degradation had no sizeable effect on the properties of the pristine terpolymers while the blended films demonstrated significant changes in their morphology due to the inclusion and aggregation of PC71BM. After thermal annealing at 85 ◦C, the width of the symmetric C=C stretching Raman mode and the C=C/C–C intensity ratio of pristine terpolymers and terpolymer:PC71BM thin films revealed that incorporation of the FTAZ acceptor improves the thermal stability of the BHJ active layers. Furthermore, prolonged thermal annealing times (> 3 hours) resulted in the development of PC71BM aggregates and terpolymer decomposition with no evident changes in the molecular and chemical structure of the terpolymers. Our findings indicate that by gradually annealing the blended films using an appropriate annealing time, the diffusion of PC71BM molecules to form aggregates can be carefully regulated, resulting in a nanostructure critical to the efficiency of organic solar cells.