This paper presents an analytical method for calculating artillery firing elements under contingency and emergency conditions, where reliance on automated systems may be compromised due to electronic warfare or system failure. The method introduces direction (Cdir) and distance (Cdis) coefficients, enabling accurate and efficient computation of firing data using only basic tools such as a calculator or tabulated values. These coefficients are derived through a geodetic approach involving auxiliary angles and coordinate transformations within the MGRS and UTM systems. The method addresses a critical gap in NATO's PACE (Primary, Alternative, Contingency, Emergency) framework by offering a time‐efficient, low‐error alternative to traditional graphical techniques. An experimental study compared the proposed analytical approach with graphical methods, involving expert artillery teams from Czech and Slovak forces. Results demonstrated that the analytical method significantly reduces errors in both direction and distance while maintaining comparable or shorter computation times. The study confirms the method's effectiveness in degraded operational environments and recommends its integration into artillery training and doctrine. This solution enhances the resilience and operational readiness of artillery units, particularly in multidomain operations where technology denial is a growing threat.
Article delves into the environmental impact of artillery fire, proposing an innovative sampling method for assessing its effects. With a focus on minimizing ecological harm from military operations, particularly in light of the ongoing war in Ukraine, it explains a new approach to defining...
This article presents a modular simulation tool designed to optimize artillery fire effectiveness using the Monte Carlo method. The proposed architecture enables the autonomous selection of target engagement parameters, supported by a core simulator that evaluates the probabilistic effects of munitions on elementary targets. Three NATO-accepted fidelity levels for modelling munition effects are compared, demonstrating the trade-off between computational efficiency and modelling realism. A functional prototype developed in MATLAB was subjected to preliminary validation, confirming both the feasibility of the approach and the need to reduce computational demands for real-time or near-real-time applications. To address this limitation, the integration of machine learning techniques is proposed to accelerate optimization and decrease the number of required Monte Carlo iterations. The results indicate that the tool has strong potential for use in real-time decision support, development of doctrinal fire-planning methods, and broader defence planning contexts.
This study evaluates the mechanical properties and ballistic resistance of composite panels fabricated from para-aramid fabric Twaron CT 747, impregnated with two distinct polymer matrices. Thermoset composites (TS) with an ER68 matrix and thermoplastic composites (TP) with a TH110 matrix were produced, each containing a matrix volume fraction of 20 %. The manufacturing process employed autoclave curing for TS specimens and hot-pressing for TP specimens. The mechanical properties were assessed through Shore D hardness measurements, tensile testing, and three-point bending tests. Ballistic resistance was evaluated via the static detonation of a 152 mm high-explosive fragmentation artillery shell, with the extent of damage analysed using X-ray computed tomography (XCT) and scanning electron microscopy (SEM). The results indicated that TS specimens exhibited 35.7 % higher Shore D surface hardness and 6.9 % greater tensile strength than TP panels. Additionally, the flexural strength of TS specimens was 93.8 % higher than that of TP specimens. Ballistic testing confirmed distinct damage mechanisms dependent on the type of polymer matrix, with TP panels demonstrating superior resistance to fragmentation loading. These findings contribute to a more comprehensive understanding of the probable influence of polymer matrices and processing conditions on the mechanical performance and protective capabilities of composite materials designed for ballistic applications.