David Kusmič

David Kusmič

Auto-generated profile, based on publicly available information

David Kusmič

University of Defence

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 November 2021 in ECS Transactions
Verified
Journal Article
Closed access
OCOndrej Cech
Ondrej Cech
DTD. Trochta
D. Trochta
DKDavid Kusmič
David Kusmič
LCLadislav Chladil
Ladislav Chladil
KJKamil Jasso
Kamil Jasso
TKTomáš Kazda
Tomáš Kazda
In this paper, we present a general overview of the development of the sulfur-based polymers that have been synthesized by inverse vulcanization and therefore they are collectively referred to as inverse vulcanized sulfur. The method of inverse vulcanization was introduced in 2013. Since then many different samples of inverse vulcanized sulfur with different properties have been synthesized. At the same time, various practical applications were introduced, including the possibility of using inverse vulcanized sulfur as the active material of the Li-S batteries.

30 November 2021 in ECS Transactions
Verified
Journal Article
Closed access
DKDavid Kusmič
David Kusmič
LKLenka Klakurková
Lenka Klakurková
MJMartin Julis
Martin Julis
PGPavel Gejdoš
Pavel Gejdoš
JVJindrich Vilis
Jindrich Vilis
OCOndrej Cech
Ondrej Cech
In this paper, commercially cold-rolled and artificial aged EN AW 7075 T6 alloy has been used. To ensure increased corrosion resistance, surface hardness, scratching resistance, and aesthetic features, this aluminium alloy was subsequently hard anodised and hot-water sealed (AC-A). The hard anodizing and sealing process increased surface hardness up to 304±13 HV 1 from an initial surface hardness of 194±3 HV 1. Also, the microhardness of the anodised layer and bulk material has been documented. Scanning electron microscopy (SEM) was used for microstructure and trapped precipitates investigation in the 42.9±1.4 thick formed anodised layer investigation. The T6 treated (AC) and hard anodised together with sealed (AC-A) EN AW 7075 alloy corrosion properties were evaluated using the anodic potentiodynamic polarisation tests (PPT) in a neutral 2.5% NaCl deaerated solution. The corrosion rate CR (mm/y) decreased approx. 39-times for the hard anodised and sealed EN AW 7075 alloy (AC-A), associated with the shift of the Ecorr (mV) to more positive values, degreased Icorr (µA) and increased Rp (Ohm) values compared to the artificial aged (AC) alloy. Additionally, the pitting was evaluated using laser confocal microscopy, and the pitting coefficient was also calculated.

25 November 2020 in ECS Transactions
Verified
Journal Article
Closed access
DKDavid Kusmič
David Kusmič
OCOndrej Cech
Ondrej Cech
LKLenka Klakurková
Lenka Klakurková
In this paper, austenitic stainless steel AISI 304 (X5CrNi 18-10) has been subjected to low-temperature plasma nitriding (LTPN) at 400°C (673 K) in 24H2:8N2 (l/h), and in 8H2:24N2 (l/h) marked as LTPN-R, and to high-temperature plasma nitriding (HTPN) at 550°C (823 K) in 24H2:8N2 (l/h) working atmosphere, for 15h. The microstructure, microhardness, and phase evaluation of the nitrided steel were studied. The PN led to significant microhardness increase from 206 ± 3 HV0.05 to 842 ± 27 HV0.05 (LTPN), 821 ± 18 HV0.05 (LTPN-R), resp. to 1246 ± 27 HV0.05 (HTPN). The corrosion properties were evaluated using the anodic potentiodynamic polarization tests in neutral 2.5% NaCl deaerated solution. The corrosion rate CR (mm.a-1) increased only slightly for LTPN procedures. But using the HTPN increased 43-times to untreated steel, due to reduced passivation ability by chromium depletion by formed CrN. Additionally, the pitting was evaluated, and the pitting coefficient was calculated.

22 June 2026 in Defence Science Journal
Verified
Journal Article
Open access
JVJindřich Viliš
Jindřich Viliš
MŠMichal Šustr
Michal Šustr
Mirosław TupajMirosław Tupaj
Mirosław Tupaj
ATAndrzej Trytek
Andrzej Trytek
DKDavid Kusmič
David Kusmič
JDJan Drábek
Jan Drábek
This study evaluates the mechanical properties and ballistic resistance of composite panels fabricated from para-aramid fabric Twaron CT 747, impregnated with two distinct polymer matrices. Thermoset composites (TS) with an ER68 matrix and thermoplastic composites (TP) with a TH110 matrix were produced, each containing a matrix volume fraction of 20 %. The manufacturing process employed autoclave curing for TS specimens and hot-pressing for TP specimens. The mechanical properties were assessed through Shore D hardness measurements, tensile testing, and three-point bending tests. Ballistic resistance was evaluated via the static detonation of a 152 mm high-explosive fragmentation artillery shell, with the extent of damage analysed using X-ray computed tomography (XCT) and scanning electron microscopy (SEM). The results indicated that TS specimens exhibited 35.7 % higher Shore D surface hardness and 6.9 % greater tensile strength than TP panels. Additionally, the flexural strength of TS specimens was 93.8 % higher than that of TP specimens. Ballistic testing confirmed distinct damage mechanisms dependent on the type of polymer matrix, with TP panels demonstrating superior resistance to fragmentation loading. These findings contribute to a more comprehensive understanding of the probable influence of polymer matrices and processing conditions on the mechanical performance and protective capabilities of composite materials designed for ballistic applications.