An electrically driven dumbbell-shaped cavity semiconductor laser laterally confined by isolation and metal layers at 635 nm has been proposed. In the simulation, we systematically analyzed the -factors, mode intensity distributions, and directionality of the dumbbell-shaped cavity. A measured speckle contrast as low as 3.7%, emission divergence of 7.7°, and maximum output power of about 2.36 W were obtained in the experiment. Such a semiconductor laser with low coherence, high power, and high directivity may provide great potential application value in laser display and imaging.
Recently, the concepts of parity–time (PT) symmetry and band topology have inspired many novel ideas for light manipulation in their respective directions. Here we propose and demonstrate a perfect light absorber with a PT phase transition via coupled topological interface states (TISs), which combines the two concepts in a one-dimensional photonic crystal heterostructure. By fine tuning the coupling between TISs, the PT phase transition is revealed by the evolution of absorption spectra in both ideal and non-ideal PT symmetry cases. Especially, in the ideal case, a perfect light absorber at an exceptional point with unidirectional invisibility is numerically obtained. In the non-ideal case, a perfect light absorber in a broken phase is experimentally realized, which verifies the possibility of tailoring non-Hermiticity by engineering the coupling. Our work paves the way for novel effects and functional devices from the exceptional point of coupled TISs, such as a unidirectional light absorber and exceptional-point sensor.
24 March 2023 in IEEE Photonics Technology Letters
High-performance 808 nm double and triple-junction vertical cavity surface emitting lasers (VCSELs) are designed and investigated. The light-current-voltage (L-I-V) characteristics of 808-nm single, double, and triple-junction VCSELs are compared. In the letter, the double-junction VCSELs with two oxide apertures exhibit a very high slope efficiency (SE) of 2.32 W/A at 25 °C, and the peak SE of 2.51 W/A is achieved at 10 °C. The power conversion efficiency (PCE) of 53.14% is achieved for double-junction individual VCSEL emitter. The peak SE of the triple-junction VCSELs reach 3.40 W/A with the PCE of 53.02% for individual VCSEL emitter. Under narrow pulse test conditions (400 Hz, 60 ns pulse width), the peak output powers of the designed double-junction and triple-junction VCSEL arrays reach 216.11 W and 325.77 W under the injection current of 80 A, respectively. Such high-performance multi-junction 808-nm VCSELs are very important for pumping solid state lasers and medical aesthetics.
29 July 2022 in Semiconductor Science and Technology
Transverse photonic crystal (TPC) laser arrays are designed by effective index method and transfer matrix method, and fabricated by the process of standard photolithography. The fundamental supermode of the TPC laser array possesses a larger optical confinement factor in the active region than those of high-order supermodes, because the propagation constant of the fundamental supermode lies in the forbidden band of the TPC while all the propagation constants of the high-order supermodes lie in the allowed band of the TPC. Therefore, the fundamental supermode can lase firstly near the threshold when the laser is injected with currents. The fabricated TPC laser achieves a single-lobe horizontal far-field pattern under an injection current of 0.3 A, and the corresponding near-field pattern is well confined to the center five waveguides injected with currents. The TPC semiconductor laser array may be a good candidate for optical sources with narrow horizontal divergence angles.
Electrically injected supersymmetric (SUSY) semiconductor lasers are proposed and fabricated. Two successive SUSY transformations are applied to the main array arranged along the direction of epitaxial growth, which can remove the propagation constants of the fundamental mode and the leaky mode of the main array from the superpartner while keeping those of other high-order modes. The SUSY laser possesses an excellent mode discrimination and favors the lasing of the fundamental mode. The fabricated SUSY laser can emit light with a single-lobe vertical far-field pattern with the full width at half maximum of 16.87° under an injection current of 1.4 A.
Broad-area lasers (BA) are practical for producing high output power. However, under a high current operation, high-order modes are easily excited, resulting in the broadened linewidth. Here, based on mode engineering of double-side transverse photonic crystals (TPCs) combined with a longitudinal high-order surface grating, a narrow-linewidth electrically-pumped broad-area laser with high power emission only using I-line lithography is demonstrated. By matching the high-order modes of the wide main waveguide with TPC bands, the effective volume of the high-order modes is expanded, while the fundamental mode remains unchanged. Then, single-lateral mode operation is achieved by selective pumping only for the main waveguide due to the significant distinction in modal gain between the fundamental mode and the high-order modes. In addition, a 27-order grating is constructed above the main waveguide to keep the laser operating in single-longitudinal mode. In the experiment, the device shows an output power of 115 mW, a lasing wavelength of 1552.94 nm with a side-mode suppression ratio (SMSR) of 59.26 dB, a narrow linewidth of 443 kHz, and a relative intensity noise (RIN) < -135 dB/Hz at 600 mA, thus has the potential to meet the needs in fields such as coherent optical communication and LiDAR.