Waste heat recovery from automotive exhaust gases represents an important strategy for improving vehicle energy efficiency. This study experimentally investigates the performance of a thermoelectric generator (TEG) system based on TEC1-12706 modules running under different cold-side cooling conditions and incorporating a Hot Rolled Steel (HRS) protective layer on the hot side. The HRS plate was used to ensure uniform heat distribution and protect the thermoelectric module against thermal shocks generated by a 250 °C heat source. Four cooling regimes were experimentally analyzed: natural convection and forced airflows equivalent to 40, 60, and 90 km/h. The results proved that increasing airflow intensity significantly improved the temperature difference across the module, from approximately 16 ± 2 °C under natural convection to nearly 40 ± 2 °C at the highest airflow velocity. Correspondingly, the steady-state voltage generated increased from approximately 0.25 ± 0.01 V to over 0.60 ± 0.01 V under an 82 Ω resistive load. The measured hot-side temperature remained below 75 °C in all experimental conditions, confirming the thermal protection capability of the HRS layer. The experimental data also revealed a near-linear relationship between voltage and temperature difference, consistent with the Seebeck effect. The proposed configuration shows the feasibility of combining thermal protection and forced convection cooling to improve the stability and electrical performance of thermoelectric waste heat recovery systems intended for low-power automotive auxiliary applications.

The noise pollution has a negative effect on the human body and in some situations, exposure to high levels of pollution can lead to serious health problems. Referring to current studies, we can see a high interest in finding solutions to reduce the effects of noise pollution, such as sound absorbing panels. The purpose of this paper is to present the current stage of development of sound absorbing panels and the absorption coefficient of the materials used. The article will provide information on different types of panels and materials used in their construction, as well as their mechanical properties. New discoveries in the field related to recyclable materials used in the construction of sound absorbing panels represent an additional point of interest, as the construction of such prototypes protects the environment. The use of waste in the construction process of sound absorbing panels can be considered sustainable a future method.