A miniaturized high selectivityfrequency selective rasorber (FSR) with a wide interabsorption high transparent bandpass based on multiple 2.5-dimensional (2.5-D) resonators is investigated. The main contribution is the achievement of a wide and high transparent passband by combining the large inductance of parallel resonators (PRs) and cascading two 2.5-D PRs, which also provide the function of miniaturization. The 2.5-D PR is implemented by connecting the interdigitated capacitor and the metal meandered strip-line on both surfaces of a lossy layer through metalized vias. The inductor and capacitor values of 2.5-D PR can be individually adjusted to shift the passband's central frequency. The lossy element is realized by inserting two 2.5-D strip-type PRs at the center of each side of a meandered cross-dipole loaded with two resistive sheets on both sides. An equivalent circuit model is proposed to analyze its operating principle. The dimensions of the miniaturized element are 0.12 λ L × 0.12 λ L × 0.118 λ L . While maintaining a good wide passband (−1dB relative bandwidth is 21.2%), the miniaturized FSR satisfies the characteristic of polarization insensitivity (TE and TM), and angular insensitivity (up to 45°). A prototype of miniaturized FSR has been manufactured and measured, showing a reasonable agreement with simulations.
20 July 2022 in IEEE Transactions on Antennas and Propagation
A novel multifunctional hybrid frequency-selective rasorber (MHFSR) which shows a broadband high-efficiency cross-polarized passband/co-polarized specular reflection band besides a wideband radar cross section (RCS) reduction is designed and analyzed. The passband/reflection band is realized by the bottom transmissive polarization converter (TPC) which exhibits a broadband cross-polarized transmission window for the $x$ -polarized incidence and a co-polarized specular reflection window for the $y$ -polarized incidence. The design methodology and four-port equivalent circuit model (ECM) are proposed and investigated. By arranging the top layer in the checkerboard-like distribution, the −1 dB cross-polarized transmission band is 9.5–11.7 GHz, and the 10 dB monostatic RCS reduction band is 2.8–20 GHz with a 151% fractional bandwidth (FBW) for the $x$ -polarized incidence. While for the $y$ -polarized incidence, two 10 dB monostatic RCS reduction bands locate at 3.3–8.5 and 15–20 GHz, and the middle −1 dB co-polarized reflection bands locate at 10–11.5 GHz. Meanwhile, the periodicity of the proposed MHFSR is only $0{.}07\lambda _{L} $ , $\lambda _{L} $ is the free-space wavelength at the lowest working frequency (2.8 GHz). The experimental results of the fabricated sample agree with the simulation results well, which proves the design validity. The proposed design combines the design of FSR, diffusion-like metasurface, and TPC to present an extra cross-polarized passband/co-reflection band besides the ultrabroadband RCS reduction.
31 March 2022 in Microwave and Optical Technology Letters
In this paper, an ultra-wideband high-efficiency bandpass filter based on a surface plasmonic waveguide (SPW) is proposed. The novel SPW consists of double-sided glide symmetric periodic corrugated metal. The dispersion characteristics of the double-layered glide symmetric SPW are analyzed. By using glide symmetry technology, the dispersion curve for the two lowest-order modes of the proposed SPW is a degeneracy at the Brillouin zone boundary, resulting in a higher propagation constant than the traditional symmetric structure with the same geometry. The dispersion relation of the SPW when glide symmetric conditions are broken is also investigated. Based on the proposed double-layered glide symmetric SPW, we design a bandpass filter working in an ultrawide range of frequencies. To realize the high-efficient transmission of the bandpass filter, the matching structure composed of double-layer grooves with gradient variation is designed for the effective mode conversion of quasi-transverse electromagnetic waves and spoof surface plasmonic polariton. The upper cutoff frequency of the passband can be tuned by adjusting the geometric parameters of the corrugated metal unit, and the lower cutoff frequency can be controlled by modifying the coupling distance with the bottom layer. A prototype of an ultra-wideband bandpass filter has been manufactured and measured, showing a reasonable agreement with simulations. The proposed novel UWB bandpass filter with glide symmetry can be widely used in microwave and millimeter wave related communication systems, and may play an important role in the fabrication of advanced plasma functional devices and circuits.