25 December 2019 in IEEE Antennas and Wireless Propagation Letters
A dual-polarized frequency-selective rasorber (FSR) with a wide high-transmission passband and two absorption bands is proposed and investigated in this paper. The proposed FSR, comprised of a lossy and a lossless layer, is formed by introducing a broadband transmission window into a wider absorption band. Simple guidelines based on impedance analysis are proposed, and the wide high-transmission passband is realized by connecting multiple coplanar parallel resonances (MCPRs) in series which introduces a large impedance in a wide band for the lossy layer. In this design, the lossy layer and lossless layer consist of a square ring absorber with multiple interdigital resonators (IRs) and a multi-layer broadband frequency selective surface (FSS) respectively. The simulation results indicate that the 1dB transmission window can be obtained from 8.12GHz to 11GHz with a 30.4% fractional bandwidth (FBW), and the bandwidth of reflection below -10dB is up to 111% from 4GHz to 14GHz. Finally, the proposed structure is fabricated and measured, both the simulation and experimental results agree well, which suggests that the concept of connecting MCPRs in series can generate a broadband transmission window effectively.
20 October 2020 in IEEE Transactions on Antennas and Propagation
A novel dual-polarized frequency-selective polarization converter (FSPC) with low-backward scattering is proposed by combing a band-pass frequency selective surface (FSS) with a polarization converter. The FSPC, comprised of the top polarization conversion layer and the bottom multi-layer band-pass FSS, is formed by introducing two polarization converter bands on both sides of the broadband passband. The four-port equivalent circuit model cascading FSS and polarization converter is proposed and investigated. It is numerically demonstrated that a flat 1dB transmission window can be obtained from 8.5GHz to 11GHz with a 25.6% fractional bandwidth (FBW), and the bandwidth of reflection below -10dB is up to 92% from 5.6GHz to 15.13GHz. Moreover, the proposed device can achieve two polarization conversion bands (5.66GHz-6.9GHz and 12.8GHz-15.2GHz) with the polarization conversion ratio over 90%. Besides, by arranging the proposed structure in a checkerboard-like distribution, the backward scattering energy can be reduced in a wide frequency band ranging from 4.5GHz to 16GHz. Both simulation and experimental results are in good agreement, which demonstrates our design strategy. Compared with the conventional polarization converters, the proposed design presents an extra frequency-selective performance and hence can be a great substitute for the frequency selective rasorber (FSR).
13 December 2021 in IEEE Antennas and Wireless Propagation Letters
A miniaturized high selectivityfrequency selective rasorber (FSR) with a wide interabsorption high transparent bandpass based on multiple 2.5-dimensional (2.5-D) resonators is investigated. The main contribution is the achievement of a wide and high transparent passband by combining the large inductance of parallel resonators (PRs) and cascading two 2.5-D PRs, which also provide the function of miniaturization. The 2.5-D PR is implemented by connecting the interdigitated capacitor and the metal meandered strip-line on both surfaces of a lossy layer through metalized vias. The inductor and capacitor values of 2.5-D PR can be individually adjusted to shift the passband's central frequency. The lossy element is realized by inserting two 2.5-D strip-type PRs at the center of each side of a meandered cross-dipole loaded with two resistive sheets on both sides. An equivalent circuit model is proposed to analyze its operating principle. The dimensions of the miniaturized element are 0.12 λ L × 0.12 λ L × 0.118 λ L . While maintaining a good wide passband (−1dB relative bandwidth is 21.2%), the miniaturized FSR satisfies the characteristic of polarization insensitivity (TE and TM), and angular insensitivity (up to 45°). A prototype of miniaturized FSR has been manufactured and measured, showing a reasonable agreement with simulations.
26 July 2019 in IEEE Antennas and Wireless Propagation Letters
A miniaturized high-selectivity frequency selective rasorber (FSR) with subwavelength resonance and interdigital resonator, which exhibits low insertions loss in passband and two high absorption bands at both sides of one passband, is investigated. The FSR consists of a lossless layer and a lossy layer. The lossy layer is made by a periodic arrangement of cross-dipoles with resistive sheets loaded on both sides of the interdigital resonator. The lossless layer is a bandpass, subwavelength resonant, frequency selective surface composed of three layers of metal in the shape of squares and crosses. An equivalent circuit model is proposed to analyze its operating principle. A meandering procedure is used in conjunction with subwavelength resonance and interdigital resonator to achieve miniaturization of the FSR. The unit cell dimensions are $0.087\lambda _{L}\times 0.087\lambda _{L}\times 0.1\lambda _{L}$ ( $\lambda _{L}$ being the free-space wavelength at the lowest operating frequency). Additionally, the designed rasorber has the property of high selectivity due to the subwavelength resonance. Under normal incidence, an insertion loss of about 0.21 dB is obtained at 10.25 GHz, the fractional bandwidth for −10 dB reflection is about 94.5%, and the −3 dB transmission relative bandwidth is 15.7%. The FSR shows a stable response over a wide range of incidence angle of 30° for both transverse electric (TE) and transverse magnetic (TM) polarizations. A prototype of designed FSR has been manufactured and measured, showing a reasonable agreement with simulations.
1 May 2016 in Construction and Building Materials
20 July 2022 in IEEE Transactions on Antennas and Propagation
A novel multifunctional hybrid frequency-selective rasorber (MHFSR) which shows a broadband high-efficiency cross-polarized passband/co-polarized specular reflection band besides a wideband radar cross section (RCS) reduction is designed and analyzed. The passband/reflection band is realized by the bottom transmissive polarization converter (TPC) which exhibits a broadband cross-polarized transmission window for the $x$ -polarized incidence and a co-polarized specular reflection window for the $y$ -polarized incidence. The design methodology and four-port equivalent circuit model (ECM) are proposed and investigated. By arranging the top layer in the checkerboard-like distribution, the −1 dB cross-polarized transmission band is 9.5–11.7 GHz, and the 10 dB monostatic RCS reduction band is 2.8–20 GHz with a 151% fractional bandwidth (FBW) for the $x$ -polarized incidence. While for the $y$ -polarized incidence, two 10 dB monostatic RCS reduction bands locate at 3.3–8.5 and 15–20 GHz, and the middle −1 dB co-polarized reflection bands locate at 10–11.5 GHz. Meanwhile, the periodicity of the proposed MHFSR is only $0{.}07\lambda _{L} $ , $\lambda _{L} $ is the free-space wavelength at the lowest working frequency (2.8 GHz). The experimental results of the fabricated sample agree with the simulation results well, which proves the design validity. The proposed design combines the design of FSR, diffusion-like metasurface, and TPC to present an extra cross-polarized passband/co-reflection band besides the ultrabroadband RCS reduction.