One of the objectives of the CleanSky-2 project is to develop an Environmentally Friendly Fire Protection (EFFP) system to substitute halon for the aircraft cargo hold. For this, an aircraft demonstrator including the cargo hold was equipped with a nitrogen-based fire suppression system. The demonstrator is located in the Flight Test Facility (FTF) low-pressure vessel and can thus be subjected to realistic cruise pressure conditions and take-off and descent pressure profiles. As a design tool, a zonally refined simulation model to predict the local oxygen and nitrogen concentration distribution in the cargo hold has been developed using the Indoor Environment Simulation Suite (IESS). The model allows for fast transient simulations of the suppression system operation. This paper presents a model validation case of knockdown during cruising, followed by a holding phase and descent.
In a flight test facility twin-aisle cabin demonstrator, a test series was conducted with the objective to investigate cleaning methods for recirculated air. Based on the data, a 3D zonal airflow simulation model of particle spread and cleaning performance was validated with the aim of extrapolating results to arbitrary aircraft cabins. For the tests, particles containing a phi6 bacteriophage, a virus only attacking a specific bacterium and with a similar structure to SARS-CoV-2, was dosed through a breathing head. The particle distribution and infectiveness of the air samples were measured. State-of-the-art HEPA filtering and cleaners based on UV-C and plasma were integrated in the recirculated air path and experimentally investigated. The test results showed the best cleaning performance for the state-of-the-art HEPA filter, while the alternatives showed lower performance levels. It was noted that infectiveness and particle count did not necessarily follow a monotonic function, making the link between these two quantities challenging. Therefore, modeling showed to be able to properly replicate particle distribution in the cabin, while an assumption of infectiveness depending on particle count had to be made. The model could successfully be applied to a single-aisle aircraft cabin geometry.
Today’s cargo bay uses Halon 1301 gas for fire suppression. While effective, this fluid is broadly banned due to its high global warming potential (GWP) of 5700 and its high ozone depletion potential. Hence, alternative agents for cargo fire protection are being sought. In this framework, tests were conducted in the Fraunhofer Flight Test Facility with the goal of evaluating the uniformity of spread of various fire suppression agents, specifically a blend of a Hydrofluoroolefine (HFO) and CO2. The facility’s cargo area, with a volume of 38 m3, features a low-pressure vessel integrating a previously operated aircraft segment. In a series of tests, the alternative extinguishing agent was supplied into the cargo hold demonstrator and concentrations were measured in different locations to understand the uniformity of distribution and the system behaviour under a realistic flight envelope. Test results show several interesting outcomes. In the empty cargo hold with air movement due to leakage, initial bottle filling weight and extinguishing agent initial concentration are consistent. When no flow movement is applied to the cargo hold, a separation between upper and lower cargo hold concentrations is found. The heavy extinguishing agent necessitates a buoyancy correction of the measured pressure differential by air density and elevation.
The shift toward more electric aircraft has intensified thermal management challenges due to increased heat load from electrical actuators, power electronics and energy storage systems concentrated within confined fuselage bays. A Conventional Environmental Control System (ECS) alone is not sufficient to dissipate such high localized heat loads. This creates the need for innovative heat dissipation and heat reuse strategies. This paper presents two thermal management concepts evaluated at the Fraunhofer Flight Test Facility. The first, developed in the ORCHESTRA project, integrates a bilge skin heat exchanger with modified ventilation to dissipate elevated heat loads. The second, under investigation in the TheMa4HERA project, focuses on reusing avionics heat to warm the FWD cargo hold, thereby reducing ECS power demand. Both concepts depend on convective heat exchange, characterized using Fraunhofer’s Convective Heat Transfer Meter (CHM) to determine key heat transfer coefficients. In parallel, an aircraft-level thermal model was developed, validated against experimental data and subsequently used for virtual demonstration of a ground test scenario.
The carriage of portable electronic devices (PED) powered by lithium-ion batteries in the aircraft cabin today is a fact. Passengers carry several such batteries in mobile phones, tablets, laptops, e-cigarettes, power banks, etc. Even though rare, there is a remaining risk that a Li-ion battery experiences thermal runaway. This typically results in the emission of smoke and gas as well as the emergence of flames and fire, thus posing a threat to safe operation. To meet this challenge, procedures have been defined, and additional mitigation means have emerged on the market. This study presents an anonymized assessment of additional mitigation means. For this, manufacturers provided samples of their product on a voluntary basis to test the potential to contain a Li-ion battery fire. Furthermore, handling was evaluated by a panel of cabin crew members. As a result, a series of recommendations for additional mitigation means and procedures was derived.